[Thu Jun 21 22:41:36 2012] Detection parameters:
  Position = (321.4, 279.1) = 16 9 28.50 54 31 22.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 215.5 +/- 28.7
  Background counts = 253.7
  Rate = 0.04 +/- 0.006

[Thu Jun 21 22:41:38 2012] Off-axis axis estimate = 2.17'
[Thu Jun 21 22:48:17 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 22:48:17 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Thu Jun 21 22:48:17 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.008
[Thu Jun 21 22:48:17 2012] Giving source the simple spatial ID 78 for pass 0, mean size = 7.52"
[Fri Jun 22 06:51:50 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src78.ximg exists
[Fri Jun 22 06:51:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src78.csv
[Fri Jun 22 06:51:50 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src78_1.ximg exists
[Fri Jun 22 06:51:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src78.csv
[Fri Jun 22 06:51:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src78_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 06:51:53 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src78.ximg exists
[Fri Jun 22 06:51:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src78.csv
[Fri Jun 22 06:51:53 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src78_1.ximg exists
[Fri Jun 22 06:51:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src78.csv
[Fri Jun 22 06:51:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src78_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 07:01:08 2012] Warning, spatial fit 78 centroid is now closest to src. 73
[Fri Jun 22 07:01:08 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 07:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 07:01:08 2012] Assessing source extent using major
[Fri Jun 22 07:01:08 2012] Source does appear to be extended
[Fri Jun 22 07:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 07:01:08 2012] Source is confused with source 71
[Fri Jun 22 07:01:24 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 07:01:24 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Fri Jun 22 07:01:24 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.008
[Fri Jun 22 07:01:24 2012] Giving source the simple spatial ID 75 for pass 1, mean size = 7.52"
[Fri Jun 22 16:05:25 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src75.ximg exists
[Fri Jun 22 16:05:25 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src75_1.ximg exists
[Fri Jun 22 16:05:25 2012] Fit fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src75 appears to have run properly
[Fri Jun 22 16:05:27 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src75.ximg exists
[Fri Jun 22 16:05:27 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src75_1.ximg exists
[Fri Jun 22 16:05:27 2012] Fit fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src75 appears to have run properly
[Fri Jun 22 16:16:11 2012] Warning, spatial fit 75 centroid is now closest to src. 73
[Fri Jun 22 16:16:12 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 16:16:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 16:16:12 2012] Assessing source extent using major
[Fri Jun 22 16:16:12 2012] Source does appear to be extended
[Fri Jun 22 16:16:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 16:16:36 2012] XMMSAS src. selection expression = ellipse(27909.046112, 24234.153687, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 22 16:16:36 2012] Writing source region out to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src78_src.reg
[Fri Jun 22 16:16:36 2012] Extracting stamp from image fullrun_pn_xmm0059751801_pi300-10000_cl_sm2.00.img.gz, (284, 242) - (359, 317)
[Fri Jun 22 16:16:37 2012] XMMSAS bgd. selection expression = annulus(27909.046112, 24234.153687, 1087.500000, 2175.000000, X, Y) && !ellipse(27052.098236, 23010.031189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25497.952942, 24196.553162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24931.375000, 23971.839447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24978.706207, 22458.993134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30515.674225, 25385.318634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30797.782000, 25458.551020, 1337.280038, 1337.280038, 0.000000, X, Y) && !ellipse(29191.377472, 25050.893799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27968.563904, 24777.855896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27277.808000, 24399.070600, 1202.432035, 1202.432035, 0.000000, X, Y) && !ellipse(28548.888000, 24695.498000, 1270.920037, 1270.920037, 0.000000, X, Y) && !ellipse(26678.692261, 24394.668793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29224.366211, 24410.067963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25984.797699, 24289.476532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26502.878876, 23877.073486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27299.116852, 23788.889343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26072.695099, 23565.513763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25530.848755, 23536.398712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24941.607483, 23443.369141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27600.048492, 22985.095154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26415.499207, 22858.779480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25958.188995, 22692.080811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25387.856842, 22594.492554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26516.987701, 21791.871887, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 22 16:16:37 2012] Writing fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src78.gif
[Fri Jun 22 17:02:02 2012] Mean detx,y = (-3108.27, 3015.50) 
[Fri Jun 22 17:02:06 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 17:02:30 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 17:02:31 2012] Setting source spectrum file to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Fri Jun 22 17:02:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src78_bgd.pi.gz
[Fri Jun 22 17:55:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 22 17:55:01 2012] rmf not generated due to insufficient counts
[Fri Jun 22 18:19:38 2012] Updating aperture counts using extracted products
[Fri Jun 22 18:19:38 2012] Error reading totcts from fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Fri Jun 22 18:19:42 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 18:19:42 2012] Using photon index=1.80, rate=0.0448, arf fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src78.arf
[Fri Jun 22 18:19:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 18:19:42 2012] Updating source flux to 1.4e-13
[Fri Jun 22 18:19:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 22 18:21:36 2012] xmm0059751801/analysis//spectral/fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src78_pl.csv not found, spectral fit skipped or did not complete