[Thu Jun 21 22:41:36 2012] Detection parameters:
  Position = (351.3, 292.3) = 16 9 13.51 54 32 32.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.0 +/- 21.5
  Background counts = 237.9
  Rate = 0.03 +/- 0.003

[Thu Jun 21 22:41:38 2012] Off-axis axis estimate = 3.86'
[Thu Jun 21 22:48:17 2012] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 22:48:17 2012] Initial guess for spatial extent in simple fitting = 8.36"
[Thu Jun 21 22:48:17 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.066
[Thu Jun 21 22:48:17 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 8.36"
[Fri Jun 22 06:51:49 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src65.ximg exists
[Fri Jun 22 06:51:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src65.csv
[Fri Jun 22 06:51:50 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src65_1.ximg exists
[Fri Jun 22 06:51:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src65.csv
[Fri Jun 22 06:51:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 06:51:53 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Fri Jun 22 06:51:53 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Fri Jun 22 06:51:53 2012] Fit fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Fri Jun 22 07:01:08 2012] Warning, spatial fit 65 centroid is now closest to src. 68
[Fri Jun 22 07:01:08 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 07:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 07:01:08 2012] Assessing source extent using major
[Fri Jun 22 07:01:08 2012] Source does appear to be extended
[Fri Jun 22 07:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 07:01:08 2012] Source is confused with source 68
[Fri Jun 22 07:01:08 2012] Source is confused with source 72
[Fri Jun 22 07:01:24 2012] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 07:01:24 2012] Initial guess for spatial extent in simple fitting = 8.36"
[Fri Jun 22 07:01:24 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.066
[Fri Jun 22 07:01:24 2012] Giving source the simple spatial ID 62 for pass 1, mean size = 8.36"
[Fri Jun 22 16:05:24 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src62.ximg exists
[Fri Jun 22 16:05:24 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src62_1.ximg exists
[Fri Jun 22 16:05:24 2012] Fit fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src62 appears to have run properly
[Fri Jun 22 16:05:27 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Fri Jun 22 16:05:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src62.csv
[Fri Jun 22 16:05:27 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Fri Jun 22 16:05:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src62.csv
[Fri Jun 22 16:05:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 16:16:11 2012] Warning, spatial fit 62 centroid is now closest to src. 72
[Fri Jun 22 16:16:11 2012] Source 65 is offset by 2.815192 and 6.052168 pixels which is larger than
2 X fitted extent = 4.037522 x 0.901177, not incorporating fit results
[Fri Jun 22 16:16:11 2012] Spatial fit model total counts = 553.553000, observed total counts = 495.000000
[Fri Jun 22 16:16:11 2012] Poor agreement between spatial fit and data for source 65
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 22 16:16:12 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 16:16:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 16:16:12 2012] Assessing source extent using major
[Fri Jun 22 16:16:12 2012] Source does appear to be extended
[Fri Jun 22 16:16:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 16:16:35 2012] XMMSAS src. selection expression = ellipse(30515.674225, 25385.318634, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 22 16:16:35 2012] Writing source region out to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src65_src.reg
[Fri Jun 22 16:16:35 2012] Extracting stamp from image fullrun_pn_xmm0059751801_pi300-10000_cl_sm2.00.img.gz, (314, 255) - (389, 330)
[Fri Jun 22 16:16:35 2012] XMMSAS bgd. selection expression = annulus(30515.674225, 25385.318634, 1087.500000, 2175.000000, X, Y) && !ellipse(33458.444977, 24499.091095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33250.325195, 25968.567505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32434.243530, 25624.579254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31602.271515, 25598.790955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30797.782000, 25458.551020, 1337.280038, 1337.280038, 0.000000, X, Y) && !ellipse(29191.377472, 25050.893799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31848.374146, 24825.184448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27968.563904, 24777.855896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27277.808000, 24399.070600, 1202.432035, 1202.432035, 0.000000, X, Y) && !ellipse(28548.888000, 24695.498000, 1270.920037, 1270.920037, 0.000000, X, Y) && !ellipse(32727.956146, 24232.271271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29224.366211, 24410.067963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27909.046112, 24234.153687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27600.048492, 22985.095154, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 22 16:16:35 2012] Writing fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src65.gif
[Fri Jun 22 16:54:57 2012] Mean detx,y = (-2769.64, 5842.15) 
[Fri Jun 22 16:55:01 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 16:55:18 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 16:55:19 2012] Setting source spectrum file to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Fri Jun 22 16:55:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src65_bgd.pi.gz
[Fri Jun 22 17:46:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 22 17:46:47 2012] rmf not generated due to insufficient counts
[Fri Jun 22 18:19:38 2012] Updating aperture counts using extracted products
[Fri Jun 22 18:19:38 2012] Error reading totcts from fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Fri Jun 22 18:19:41 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 18:19:41 2012] Using photon index=1.80, rate=0.0273, arf fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src65.arf
[Fri Jun 22 18:19:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 18:19:41 2012] Updating source flux to 1e-13
[Fri Jun 22 18:19:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 22 18:21:36 2012] xmm0059751801/analysis//spectral/fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src65_pl.csv not found, spectral fit skipped or did not complete