[Thu Jun 21 22:41:36 2012] Detection parameters: Position = (440.9, 312.2) = 16 8 28.71 54 33 46.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 152.5 +/- 23.6 Background counts = 164.4 Rate = 0.02 +/- 0.003 [Thu Jun 21 22:41:38 2012] Off-axis axis estimate = 10.37' [Thu Jun 21 22:48:17 2012] Using EEF radius (= 11.62 ")to estimate initial spatial extent for simple fitting [Thu Jun 21 22:48:17 2012] Initial guess for spatial extent in simple fitting = 11.62" [Thu Jun 21 22:48:17 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.895 [Thu Jun 21 22:48:17 2012] Giving source the simple spatial ID 58 for pass 0, mean size = 11.62" [Fri Jun 22 06:51:49 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src58.ximg exists [Fri Jun 22 06:51:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src58.csv [Fri Jun 22 06:51:49 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src58_1.ximg exists [Fri Jun 22 06:51:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src58.csv [Fri Jun 22 06:51:49 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src58_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jun 22 06:51:52 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src58.ximg exists [Fri Jun 22 06:51:52 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists [Fri Jun 22 06:51:52 2012] Fit fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src58 appears to have run properly [Fri Jun 22 07:01:08 2012] Spatial fit model total counts = 330.247000, observed total counts = 304.000000 [Fri Jun 22 07:01:08 2012] Offset between fit and detection position for source 58 = 4.793786 pixels Spatial fit parameters: Offset between fit and detection position for source 58 = 4.793786 pixels Position = (443.7, 316.0) = 16 8 27.26 54 34 4.5 Extent = 16.4 (8.9-20.1)", rotation angle = 0 Source counts = 192.5 +/- 13.9 Background counts = 0.0 Rate = 0.4 +/- 0.03 Deleting source due to low signal-to-noise ratio