[Thu Jun 21 22:41:35 2012] Detection parameters:
  Position = (392.7, 196.3) = 16 8 52.94 54 25 23.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.1 +/- 27.2
  Background counts = 238.9
  Rate = 0.02 +/- 0.004

[Thu Jun 21 22:41:38 2012] Off-axis axis estimate = 10.08'
[Thu Jun 21 22:48:17 2012] Using EEF radius (= 11.47 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 22:48:17 2012] Initial guess for spatial extent in simple fitting = 11.47"
[Thu Jun 21 22:48:17 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.915
[Thu Jun 21 22:48:17 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 11.47"
[Fri Jun 22 06:51:49 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src53.ximg exists
[Fri Jun 22 06:51:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src53.csv
[Fri Jun 22 06:51:49 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src53_1.ximg exists
[Fri Jun 22 06:51:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src53.csv
[Fri Jun 22 06:51:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 06:51:52 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Fri Jun 22 06:51:52 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Fri Jun 22 06:51:52 2012] Fit fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Fri Jun 22 07:01:08 2012] Source 53 is offset by 1.606464 and 1.848124 pixels which is larger than
2 X fitted extent = 1.327315 x 1.327315, not incorporating fit results
[Fri Jun 22 07:01:08 2012] Warning, spatial fit 53 centroid is now closest to src. 20
[Fri Jun 22 07:01:08 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 07:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 07:01:08 2012] Assessing source extent using major
[Fri Jun 22 07:01:08 2012] Source does appear to be extended
[Fri Jun 22 07:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 07:01:24 2012] Using EEF radius (= 11.47 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 07:01:24 2012] Initial guess for spatial extent in simple fitting = 11.47"
[Fri Jun 22 07:01:24 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.915
[Fri Jun 22 07:01:24 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 11.47"
[Fri Jun 22 16:05:24 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src52.ximg exists
[Fri Jun 22 16:05:24 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src52_1.ximg exists
[Fri Jun 22 16:05:24 2012] Fit fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src52 appears to have run properly
[Fri Jun 22 16:05:27 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Fri Jun 22 16:05:27 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Fri Jun 22 16:05:27 2012] Fit fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Fri Jun 22 16:16:11 2012] Warning: source 52 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 10.376982 pixels away
[Fri Jun 22 16:16:12 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 16:16:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 16:16:12 2012] Assessing source extent using major
[Fri Jun 22 16:16:12 2012] Source does appear to be extended
[Fri Jun 22 16:16:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 16:16:35 2012] XMMSAS src. selection expression = ellipse(34119.454346, 17031.304794, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 22 16:16:35 2012] Writing source region out to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src53_src.reg
[Fri Jun 22 16:16:35 2012] Extracting stamp from image fullrun_pn_xmm0059751801_pi300-10000_cl_sm2.00.img.gz, (355, 159) - (430, 234)
[Fri Jun 22 16:16:35 2012] XMMSAS bgd. selection expression = annulus(34119.454346, 17031.304794, 1087.500000, 2175.000000, X, Y) && !ellipse(34420.640869, 17783.145370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36479.184000, 17595.170000, 1861.664054, 1861.664054, 0.000000, X, Y) && !ellipse(34597.269348, 19433.422638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34133.284393, 19262.539642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35285.240540, 18481.225586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33291.249817, 18665.554977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35944.779022, 18460.823013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34660.364000, 17792.425600, 892.104026, 892.104026, 0.000000, X, Y) && !ellipse(35139.131622, 17375.267822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33443.682000, 20346.046600, 1685.040048, 1685.040048, 0.000000, X, Y) && !ellipse(34374.800000, 19920.028000, 1689.976049, 1689.976049, 0.000000, X, Y) && !ellipse(33711.121460, 19019.919083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32606.005341, 18536.482056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34113.946000, 18349.418000, 891.968026, 891.968026, 0.000000, X, Y)
[Fri Jun 22 16:16:35 2012] Writing fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src53.gif
[Fri Jun 22 16:50:12 2012] Mean detx,y = (-11582.95, 7443.66) 
[Fri Jun 22 16:50:15 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 16:50:36 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 16:50:36 2012] Setting source spectrum file to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Fri Jun 22 16:50:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Fri Jun 22 17:45:08 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 22 17:45:08 2012] rmf not generated due to insufficient counts
[Fri Jun 22 18:19:37 2012] Updating aperture counts using extracted products
[Fri Jun 22 18:19:37 2012] Error reading totcts from fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Fri Jun 22 18:19:41 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 18:19:41 2012] Using photon index=1.80, rate=0.0193, arf fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src53.arf
[Fri Jun 22 18:19:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 18:19:41 2012] Updating source flux to 1.2e-13
[Fri Jun 22 18:19:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 22 18:21:36 2012] xmm0059751801/analysis//spectral/fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src53_pl.csv not found, spectral fit skipped or did not complete