[Thu Jun 21 22:41:35 2012] Detection parameters:
  Position = (395.9, 302.7) = 16 8 51.20 54 33 14.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 160.7 +/- 19.9
  Background counts = 196.0
  Rate = 0.02 +/- 0.003

[Thu Jun 21 22:41:38 2012] Off-axis axis estimate = 7.07'
[Thu Jun 21 22:48:17 2012] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 22:48:17 2012] Initial guess for spatial extent in simple fitting = 9.97"
[Thu Jun 21 22:48:17 2012] source mask rpix=2.3, npix_max = 31, mask sum = 32, frac = 1.027
[Thu Jun 21 22:48:17 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 9.97"
[Fri Jun 22 06:51:49 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src38.ximg exists
[Fri Jun 22 06:51:49 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src38_1.ximg exists
[Fri Jun 22 06:51:49 2012] Fit fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src38 appears to have run properly
[Fri Jun 22 06:51:52 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Fri Jun 22 06:51:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src38.csv
[Fri Jun 22 06:51:52 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Fri Jun 22 06:51:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src38.csv
[Fri Jun 22 06:51:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 07:01:08 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 12.124569 pixels away
[Fri Jun 22 07:01:08 2012] Warning, spatial fit 38 centroid is now closest to src. 40
[Fri Jun 22 07:01:08 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 07:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 07:01:08 2012] Assessing source extent using major
[Fri Jun 22 07:01:08 2012] Source does appear to be extended
[Fri Jun 22 07:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 07:01:08 2012] Source is confused with source 7
[Fri Jun 22 07:01:24 2012] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 07:01:24 2012] Initial guess for spatial extent in simple fitting = 9.97"
[Fri Jun 22 07:01:24 2012] source mask rpix=2.3, npix_max = 31, mask sum = 32, frac = 1.027
[Fri Jun 22 07:01:24 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 9.97"
[Fri Jun 22 16:05:23 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src38.ximg exists
[Fri Jun 22 16:05:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src38.csv
[Fri Jun 22 16:05:23 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src38_1.ximg exists
[Fri Jun 22 16:05:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src38.csv
[Fri Jun 22 16:05:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 16:05:26 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Fri Jun 22 16:05:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src38.csv
[Fri Jun 22 16:05:26 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Fri Jun 22 16:05:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src38.csv
[Fri Jun 22 16:05:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 16:16:11 2012] Warning, spatial fit 38 centroid is now closest to src. 14
[Fri Jun 22 16:16:12 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 16:16:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 16:16:12 2012] Assessing source extent using major
[Fri Jun 22 16:16:12 2012] Source does appear to be extended
[Fri Jun 22 16:16:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 16:16:34 2012] XMMSAS src. selection expression = ellipse(34396.944733, 26287.425903, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 22 16:16:34 2012] Writing source region out to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src38_src.reg
[Fri Jun 22 16:16:34 2012] Extracting stamp from image fullrun_pn_xmm0059751801_pi300-10000_cl_sm2.00.img.gz, (358, 265) - (433, 340)
[Fri Jun 22 16:16:34 2012] XMMSAS bgd. selection expression = annulus(34396.944733, 26287.425903, 1087.500000, 2175.000000, X, Y) && !ellipse(33458.444977, 24499.091095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34795.000000, 25886.320007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36688.699646, 26862.770752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36867.247711, 26394.442169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36141.044098, 26705.980652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34948.306702, 26435.735840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34007.348389, 25342.373535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36269.258118, 25094.850464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37187.048645, 26764.314301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35571.256226, 26536.520752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35631.582000, 25732.860000, 1698.488049, 1698.488049, 0.000000, X, Y) && !ellipse(33250.325195, 25968.567505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36554.094971, 25975.956451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34228.976959, 25873.166992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34489.663666, 25478.178284, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32434.243530, 25624.579254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31602.271515, 25598.790955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31848.374146, 24825.184448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32727.956146, 24232.271271, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 22 16:16:34 2012] Writing fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src38.gif
[Fri Jun 22 16:40:43 2012] Mean detx,y = (-2737.11, 9835.97) 
[Fri Jun 22 16:40:47 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 16:41:25 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 16:41:25 2012] Setting source spectrum file to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Fri Jun 22 16:41:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Fri Jun 22 17:39:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 22 17:39:13 2012] rmf not generated due to insufficient counts
[Fri Jun 22 18:19:37 2012] Updating aperture counts using extracted products
[Fri Jun 22 18:19:37 2012] Error reading totcts from fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Fri Jun 22 18:19:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 18:19:40 2012] Using photon index=1.80, rate=0.0235, arf fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src38.arf
[Fri Jun 22 18:19:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 18:19:40 2012] Updating source flux to 1.4e-13
[Fri Jun 22 18:19:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 22 18:21:36 2012] xmm0059751801/analysis//spectral/fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete