[Thu Jun 21 22:41:34 2012] Detection parameters:
  Position = (312.3, 134.1) = 16 9 33.06 54 20 54.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 217.5 +/- 28.4
  Background counts = 193.3
  Rate = 0.03 +/- 0.004

[Thu Jun 21 22:41:38 2012] Off-axis axis estimate = 11.96'
[Thu Jun 21 22:48:17 2012] Using EEF radius (= 12.41 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 22:48:17 2012] Initial guess for spatial extent in simple fitting = 12.41"
[Thu Jun 21 22:48:17 2012] source mask rpix=2.9, npix_max = 44, mask sum = 42, frac = 0.934
[Thu Jun 21 22:48:17 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.41"
[Fri Jun 22 06:51:48 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun 22 06:51:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src3.csv
[Fri Jun 22 06:51:48 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun 22 06:51:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src3.csv
[Fri Jun 22 06:51:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 06:51:51 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun 22 06:51:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun 22 06:51:51 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun 22 06:51:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun 22 06:51:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 07:01:08 2012] Spatial fit model total counts = 774.027000, observed total counts = 706.000000
[Fri Jun 22 07:01:08 2012] Offset between fit and detection position for source 3 = 1.928721 pixels
[Fri Jun 22 07:01:08 2012] Warning, changing simple spatial fit ID from 3 to 1
[Fri Jun 22 07:01:08 2012] 756.019000 total counts/ 548.534000 bgd. counts: snr = 8.859005
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.928721 pixels
  Position = (313.6, 135.5) = 16 9 32.40 54 21 0.4
  Extent = 23.7 (22.4-24.4)", rotation angle = 0
  Source counts = 207.5 +/- 27.5
  Background counts = 548.5
  Rate = 0.4 +/- 0.05
[Fri Jun 22 07:01:08 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 07:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 07:01:08 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 07:01:08 2012] Source does appear to be extended
[Fri Jun 22 07:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 07:01:08 2012] Source is confused with source 1
[Fri Jun 22 07:01:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 22 07:01:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 22 07:01:24 2012] Initial guess for spatial extent in simple fitting = 23.73"
[Fri Jun 22 07:01:24 2012] source mask rpix=5.5, npix_max = 141, mask sum = 131, frac = 0.924
[Fri Jun 22 07:01:24 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 23.73"
[Fri Jun 22 16:05:23 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 22 16:05:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src3.csv
[Fri Jun 22 16:05:23 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 22 16:05:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src3.csv
[Fri Jun 22 16:05:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 16:05:25 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 22 16:05:25 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 22 16:05:25 2012] Fit fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jun 22 16:16:11 2012] Warning, spatial fit 3 centroid is now closest to src. 32
[Fri Jun 22 16:16:12 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 16:16:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 16:16:12 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 16:16:12 2012] Source does appear to be extended
[Fri Jun 22 16:16:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 16:16:32 2012] XMMSAS src. selection expression = ellipse(27236.020000, 11737.024000, 1423.578041, 1423.578041, 0.000000, X, Y)
[Fri Jun 22 16:16:32 2012] Writing source region out to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src3_src.reg
[Fri Jun 22 16:16:32 2012] Extracting stamp from image fullrun_pn_xmm0059751801_pi300-10000_cl_sm2.00.img.gz, (232, 54) - (395, 217)
[Fri Jun 22 16:16:32 2012] XMMSAS bgd. selection expression = annulus(27236.020000, 11737.024000, 2372.630068, 4745.260137, X, Y) && !ellipse(26797.194183, 12144.469818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27146.986328, 10416.512367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27520.721527, 13518.365173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26787.612183, 12922.341629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25762.906281, 16751.641266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26108.407898, 15352.126205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26594.416321, 14566.686234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26384.045400, 14159.946000, 788.283223, 788.283223, 0.000000, X, Y) && !ellipse(26930.726227, 13555.016525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26460.401062, 13416.779770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28323.684692, 13345.258591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27312.992035, 12831.060394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28099.692000, 11803.540000, 1938.744056, 1938.744056, 0.000000, X, Y) && !ellipse(27381.456000, 11509.922000, 1948.520056, 1948.520056, 0.000000, X, Y) && !ellipse(22466.382080, 9440.708786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26112.010773, 16045.345062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27042.895905, 14820.780502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27394.859863, 14565.823349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26005.836151, 17352.206238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26595.082733, 17167.225037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26852.299316, 16455.059891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27084.348877, 15444.749557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26653.057953, 15270.701767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26149.996277, 14913.549881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28520.486084, 14588.857056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27981.982422, 13741.675705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28597.752747, 12826.064957, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 22 16:16:32 2012] Writing fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src3.gif
[Fri Jun 22 16:17:52 2012] Mean detx,y = (-15175.51, -205.49) 
[Fri Jun 22 16:17:57 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 16:19:07 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 16:19:08 2012] Setting source spectrum file to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 22 16:19:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Jun 22 18:19:36 2012] Updating aperture counts using extracted products
[Fri Jun 22 18:19:36 2012] Error reading totcts from fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Jun 22 18:19:39 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 18:19:39 2012] Using photon index=1.80, rate=0.411, arf fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src3.arf
[Fri Jun 22 18:19:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 18:19:39 2012] Updating source flux to 2.7e-12
[Fri Jun 22 18:19:54 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Fri Jun 22 18:21:36 2012] xmm0059751801/analysis//spectral/fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete