[Thu Jun 21 22:41:35 2012] Detection parameters:
  Position = (302.5, 164.1) = 16 9 37.94 54 23 3.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.1 +/- 23.0
  Background counts = 159.9
  Rate = 0.02 +/- 0.003

[Thu Jun 21 22:41:38 2012] Off-axis axis estimate = 9.75'
[Thu Jun 21 22:48:17 2012] Using EEF radius (= 11.30 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 22:48:17 2012] Initial guess for spatial extent in simple fitting = 11.30"
[Thu Jun 21 22:48:17 2012] source mask rpix=2.6, npix_max = 38, mask sum = 32, frac = 0.833
[Thu Jun 21 22:48:17 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 11.30"
[Fri Jun 22 06:51:48 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src26.ximg exists
[Fri Jun 22 06:51:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src26.csv
[Fri Jun 22 06:51:48 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src26_1.ximg exists
[Fri Jun 22 06:51:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src26.csv
[Fri Jun 22 06:51:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 06:51:51 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Fri Jun 22 06:51:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src26.csv
[Fri Jun 22 06:51:51 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Fri Jun 22 06:51:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src26.csv
[Fri Jun 22 06:51:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 07:01:08 2012] Spatial fit model total counts = 459.662000, observed total counts = 425.000000
[Fri Jun 22 07:01:08 2012] Offset between fit and detection position for source 26 = 1.370343 pixels
[Fri Jun 22 07:01:08 2012] Warning, changing simple spatial fit ID from 26 to 25
[Fri Jun 22 07:01:08 2012] 442.086900 total counts/ 401.354000 bgd. counts: snr = 2.033207
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 1.370343 pixels
  Position = (303.7, 163.5) = 16 9 37.31 54 23 2.5
  Extent = 10.1 (2.8-22.3)", rotation angle = 0
  Source counts = 40.7 +/- 21.0
  Background counts = 401.4
  Rate = 0.08 +/- 0.04
[Fri Jun 22 07:01:08 2012] Spatial fit model total counts = 338.064000, observed total counts = 269.000000
[Fri Jun 22 07:01:08 2012] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 22 07:01:08 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 07:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 07:01:08 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 07:01:08 2012] Source does appear to be extended
[Fri Jun 22 07:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 07:01:08 2012] Source is confused with source 25
[Fri Jun 22 07:01:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 22 07:01:24 2012] Initial guess for spatial extent in simple fitting = 10.12"
[Fri Jun 22 07:01:24 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.939
[Fri Jun 22 07:01:24 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 10.12"
[Fri Jun 22 16:05:23 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src26.ximg exists
[Fri Jun 22 16:05:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src26.csv
[Fri Jun 22 16:05:23 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src26_1.ximg exists
[Fri Jun 22 16:05:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src26.csv
[Fri Jun 22 16:05:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 16:05:26 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Fri Jun 22 16:05:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src26.csv
[Fri Jun 22 16:05:26 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Fri Jun 22 16:05:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src26.csv
[Fri Jun 22 16:05:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 16:16:11 2012] Spatial fit model total counts = 461.522000, observed total counts = 425.000000
[Fri Jun 22 16:16:11 2012] Offset between fit and detection position for source 26 = 0.235583 pixels
[Fri Jun 22 16:16:11 2012] Warning, changing simple spatial fit ID from 26 to 25
[Fri Jun 22 16:16:11 2012] 461.099700 total counts/ 423.172000 bgd. counts: snr = 1.843733
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.235583 pixels
  Position = (303.8, 163.3) = 16 9 37.27 54 23 1.5
  Extent = 9.9 (2.8-22.3)", rotation angle = 0
  Source counts = 37.9 +/- 21.5
  Background counts = 423.2
  Rate = 0.08 +/- 0.04
[Fri Jun 22 16:16:12 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 16:16:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 16:16:12 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 16:16:12 2012] Source does appear to be extended
[Fri Jun 22 16:16:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 16:16:33 2012] XMMSAS src. selection expression = ellipse(26384.045400, 14159.946000, 591.212417, 591.212417, 0.000000, X, Y)
[Fri Jun 22 16:16:33 2012] Writing source region out to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src26_src.reg
[Fri Jun 22 16:16:33 2012] Extracting stamp from image fullrun_pn_xmm0059751801_pi300-10000_cl_sm2.00.img.gz, (270, 129) - (338, 197)
[Fri Jun 22 16:16:33 2012] XMMSAS bgd. selection expression = annulus(26384.045400, 14159.946000, 985.354028, 1970.708057, X, Y) && !ellipse(26797.194183, 12144.469818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27236.020000, 11737.024000, 1898.104055, 1898.104055, 0.000000, X, Y) && !ellipse(27520.721527, 13518.365173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26787.612183, 12922.341629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25762.906281, 16751.641266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26108.407898, 15352.126205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26594.416321, 14566.686234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26930.726227, 13555.016525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26460.401062, 13416.779770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28323.684692, 13345.258591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27312.992035, 12831.060394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28099.692000, 11803.540000, 1938.744056, 1938.744056, 0.000000, X, Y) && !ellipse(27381.456000, 11509.922000, 1948.520056, 1948.520056, 0.000000, X, Y) && !ellipse(26112.010773, 16045.345062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27042.895905, 14820.780502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27394.859863, 14565.823349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26852.299316, 16455.059891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27084.348877, 15444.749557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26653.057953, 15270.701767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26149.996277, 14913.549881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28520.486084, 14588.857056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27981.982422, 13741.675705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28597.752747, 12826.064957, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 22 16:16:33 2012] Writing fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src26.gif
[Fri Jun 22 16:32:15 2012] Mean detx,y = (-12533.20, -601.51) 
[Fri Jun 22 16:32:20 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 16:32:47 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 16:32:47 2012] Setting source spectrum file to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri Jun 22 16:32:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Fri Jun 22 17:33:07 2012] Not generating rmf since there are only 37 counts
[Fri Jun 22 17:33:07 2012] rmf not generated due to insufficient counts
[Fri Jun 22 18:19:37 2012] Updating aperture counts using extracted products
[Fri Jun 22 18:19:37 2012] Error reading totcts from fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri Jun 22 18:19:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 18:19:40 2012] Using photon index=1.80, rate=0.075, arf fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src26.arf
[Fri Jun 22 18:19:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 18:19:40 2012] Updating source flux to 5.1e-13
[Fri Jun 22 18:19:54 2012] Flag p found in src. 26 procflags, skipping spectral fitting
[Fri Jun 22 18:19:54 2012] Flag c found in src. 26 procflags, skipping spectral fitting
[Fri Jun 22 18:19:54 2012] Source 26 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 22 18:21:36 2012] xmm0059751801/analysis//spectral/fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete