[Thu Jun 21 22:41:35 2012] Detection parameters:
  Position = (296.7, 193.1) = 16 9 40.82 54 25 10.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 230.1 +/- 33.4
  Background counts = 219.1
  Rate = 0.03 +/- 0.005

[Thu Jun 21 22:41:38 2012] Off-axis axis estimate = 7.64'
[Thu Jun 21 22:48:17 2012] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 22:48:17 2012] Initial guess for spatial extent in simple fitting = 10.25"
[Thu Jun 21 22:48:17 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.920
[Thu Jun 21 22:48:17 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 10.25"
[Fri Jun 22 06:51:48 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src23.ximg exists
[Fri Jun 22 06:51:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src23.csv
[Fri Jun 22 06:51:48 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri Jun 22 06:51:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src23.csv
[Fri Jun 22 06:51:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 06:51:51 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri Jun 22 06:51:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src23.csv
[Fri Jun 22 06:51:51 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Jun 22 06:51:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src23.csv
[Fri Jun 22 06:51:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 07:01:08 2012] Source 23 is offset by 1.615242 and -2.769305 pixels which is larger than
2 X fitted extent = 1.815338 x 1.815338, not incorporating fit results
[Fri Jun 22 07:01:08 2012] Spatial fit model total counts = 493.546000, observed total counts = 436.000000
[Fri Jun 22 07:01:08 2012] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 22 07:01:08 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 07:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 07:01:08 2012] Assessing source extent using major
[Fri Jun 22 07:01:08 2012] Source does appear to be extended
[Fri Jun 22 07:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 07:01:08 2012] Source is confused with source 114
[Fri Jun 22 07:01:24 2012] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 07:01:24 2012] Initial guess for spatial extent in simple fitting = 10.25"
[Fri Jun 22 07:01:24 2012] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.920
[Fri Jun 22 07:01:24 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 10.25"
[Fri Jun 22 16:05:23 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src23.ximg exists
[Fri Jun 22 16:05:23 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src23.csv
[Fri Jun 22 16:05:23 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri Jun 22 16:05:23 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src23.csv
[Fri Jun 22 16:05:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 16:05:26 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri Jun 22 16:05:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri Jun 22 16:05:26 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri Jun 22 16:05:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri Jun 22 16:05:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 16:16:11 2012] Warning, spatial fit 23 centroid is now closest to src. 54
[Fri Jun 22 16:16:11 2012] Source 23 is offset by 5.642095 and 5.145808 pixels which is larger than
2 X fitted extent = 1.244910 x 1.244910, not incorporating fit results
[Fri Jun 22 16:16:12 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 16:16:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 16:16:12 2012] Assessing source extent using major
[Fri Jun 22 16:16:12 2012] Source does appear to be extended
[Fri Jun 22 16:16:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 16:16:33 2012] XMMSAS src. selection expression = ellipse(25762.906281, 16751.641266, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 22 16:16:33 2012] Writing source region out to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src23_src.reg
[Fri Jun 22 16:16:33 2012] Extracting stamp from image fullrun_pn_xmm0059751801_pi300-10000_cl_sm2.00.img.gz, (259, 156) - (334, 231)
[Fri Jun 22 16:16:33 2012] XMMSAS bgd. selection expression = annulus(25762.906281, 16751.641266, 1087.500000, 2175.000000, X, Y) && !ellipse(26108.407898, 15352.126205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26594.416321, 14566.686234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26384.045400, 14159.946000, 788.283223, 788.283223, 0.000000, X, Y) && !ellipse(26112.010773, 16045.345062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27042.895905, 14820.780502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27394.859863, 14565.823349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25258.933929, 19538.308243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25424.313049, 18689.455551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25322.022736, 18316.137192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26288.256927, 18048.463776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25312.000000, 17959.152573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26005.836151, 17352.206238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26595.082733, 17167.225037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26852.299316, 16455.059891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27084.348877, 15444.749557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26653.057953, 15270.701767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26149.996277, 14913.549881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28520.486084, 14588.857056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27981.982422, 13741.675705, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 22 16:16:33 2012] Writing fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src23.gif
[Fri Jun 22 16:30:14 2012] Mean detx,y = (-9973.64, -628.35) 
[Fri Jun 22 16:30:18 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 16:30:44 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 16:30:44 2012] Setting source spectrum file to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Jun 22 16:30:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Fri Jun 22 17:32:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 22 17:32:23 2012] rmf not generated due to insufficient counts
[Fri Jun 22 18:19:37 2012] Updating aperture counts using extracted products
[Fri Jun 22 18:19:37 2012] Error reading totcts from fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Jun 22 18:19:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 18:19:40 2012] Using photon index=1.80, rate=0.0336, arf fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src23.arf
[Fri Jun 22 18:19:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 18:19:40 2012] Updating source flux to 1.8e-13
[Fri Jun 22 18:19:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 22 18:21:36 2012] xmm0059751801/analysis//spectral/fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete