[Thu Jun 21 22:41:37 2012] Detection parameters:
  Position = (398.2, 231.0) = 16 8 50.18 54 27 57.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 123.9 +/- 25.7
  Background counts = 236.2
  Rate = 0.02 +/- 0.004

[Thu Jun 21 22:41:38 2012] Off-axis axis estimate = 8.73'
[Thu Jun 21 22:48:17 2012] Using EEF radius (= 10.79 ")to estimate initial spatial extent for simple fitting
[Thu Jun 21 22:48:17 2012] Initial guess for spatial extent in simple fitting = 10.79"
[Thu Jun 21 22:48:17 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.013
[Thu Jun 21 22:48:17 2012] Giving source the simple spatial ID 100 for pass 0, mean size = 10.79"
[Fri Jun 22 06:51:50 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src100.ximg exists
[Fri Jun 22 06:51:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src100.csv
[Fri Jun 22 06:51:50 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src100_1.ximg exists
[Fri Jun 22 06:51:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src100.csv
[Fri Jun 22 06:51:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src100_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 06:51:54 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src100.ximg exists
[Fri Jun 22 06:51:54 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src100_1.ximg exists
[Fri Jun 22 06:51:54 2012] Fit fullrun_pn_xmm0059751801_pi300-10000_cl_pass0_tfrozen_src100 appears to have run properly
[Fri Jun 22 07:01:08 2012] Source 100 is offset by -9.882655 and -1.461990 pixels which is larger than
2 X fitted extent = 1.268837 x 1.268837, not incorporating fit results
[Fri Jun 22 07:01:08 2012] Spatial fit model total counts = 497.726000, observed total counts = 498.000000
[Fri Jun 22 07:01:08 2012] Offset between fit and detection position for source 100 = 2.524702 pixels
[Fri Jun 22 07:01:08 2012] Warning, changing simple spatial fit ID from 100 to 46
[Fri Jun 22 07:01:08 2012] 459.473000 total counts/ 355.336000 bgd. counts: snr = 5.524404
Spatial fit parameters:
  Offset between fit and detection position for source 100 = 2.524702 pixels
  Position = (395.8, 230.3) = 16 8 51.39 54 27 52.1
  Extent = 21.6 (21.4-21.7)", rotation angle = 0
  Source counts = 104.1 +/- 21.4
  Background counts = 355.3
  Rate = 0.2 +/- 0.04
[Fri Jun 22 07:01:08 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 07:01:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 07:01:08 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 07:01:08 2012] Source does appear to be extended
[Fri Jun 22 07:01:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 07:01:08 2012] Source is confused with source 19
[Fri Jun 22 07:01:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 22 07:01:24 2012] Initial guess for spatial extent in simple fitting = 21.59"
[Fri Jun 22 07:01:24 2012] source mask rpix=5.0, npix_max = 119, mask sum = 121, frac = 1.013
[Fri Jun 22 07:01:24 2012] Giving source the simple spatial ID 96 for pass 1, mean size = 21.59"
[Fri Jun 22 16:05:25 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src96.ximg exists
[Fri Jun 22 16:05:25 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src96_1.ximg exists
[Fri Jun 22 16:05:25 2012] Fit fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_src96 appears to have run properly
[Fri Jun 22 16:05:29 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src96.ximg exists
[Fri Jun 22 16:05:29 2012] fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src96_1.ximg exists
[Fri Jun 22 16:05:29 2012] Fit fullrun_pn_xmm0059751801_pi300-10000_cl_pass1_tfrozen_src96 appears to have run properly
[Fri Jun 22 16:16:11 2012] Spatial fit model total counts = 496.864000, observed total counts = 498.000000
[Fri Jun 22 16:16:11 2012] Offset between fit and detection position for source 100 = 0.736661 pixels
[Fri Jun 22 16:16:11 2012] Warning, changing simple spatial fit ID from 96 to 46
[Fri Jun 22 16:16:11 2012] 461.237300 total counts/ 374.773000 bgd. counts: snr = 4.466349
Spatial fit parameters:
  Offset between fit and detection position for source 100 = 0.736661 pixels
  Position = (395.7, 229.5) = 16 8 51.44 54 27 48.9
  Extent = 21.1 (20.0-21.7)", rotation angle = 0
  Source counts = 86.5 +/- 21.5
  Background counts = 374.8
  Rate = 0.2 +/- 0.04
[Fri Jun 22 16:16:12 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 16:16:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 16:16:12 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 16:16:12 2012] Source does appear to be extended
[Fri Jun 22 16:16:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 16:16:38 2012] XMMSAS src. selection expression = ellipse(34374.800000, 19920.028000, 1267.482036, 1267.482036, 0.000000, X, Y)
[Fri Jun 22 16:16:38 2012] Writing source region out to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src100_src.reg
[Fri Jun 22 16:16:38 2012] Extracting stamp from image fullrun_pn_xmm0059751801_pi300-10000_cl_sm2.00.img.gz, (323, 157) - (469, 302)
[Fri Jun 22 16:16:38 2012] XMMSAS bgd. selection expression = annulus(34374.800000, 19920.028000, 2112.470061, 4224.940122, X, Y) && !ellipse(33458.444977, 24499.091095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34420.640869, 17783.145370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36479.184000, 17595.170000, 1861.664054, 1861.664054, 0.000000, X, Y) && !ellipse(35631.582000, 25732.860000, 1698.488049, 1698.488049, 0.000000, X, Y) && !ellipse(34597.269348, 19433.422638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34133.284393, 19262.539642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35285.240540, 18481.225586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33291.249817, 18665.554977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35944.779022, 18460.823013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34660.364000, 17792.425600, 892.104026, 892.104026, 0.000000, X, Y) && !ellipse(35139.131622, 17375.267822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34119.454346, 17031.304794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30797.782000, 25458.551020, 1337.280038, 1337.280038, 0.000000, X, Y) && !ellipse(31848.374146, 24825.184448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32727.956146, 24232.271271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33694.328000, 20375.993400, 955.496027, 955.496027, 0.000000, X, Y) && !ellipse(33443.682000, 20346.046600, 1685.040048, 1685.040048, 0.000000, X, Y) && !ellipse(33711.121460, 19019.919083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32606.005341, 18536.482056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34113.946000, 18349.418000, 891.968026, 891.968026, 0.000000, X, Y)
[Fri Jun 22 16:16:38 2012] Writing fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src100.gif
[Fri Jun 22 17:13:04 2012] Mean detx,y = (-8856.18, 8358.54) 
[Fri Jun 22 17:13:06 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 17:13:43 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 17:13:43 2012] Setting source spectrum file to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src100_src_b10.pi.gz
[Fri Jun 22 17:13:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src100_bgd.pi.gz
[Fri Jun 22 18:08:00 2012] Not generating rmf since there are only 86 counts
[Fri Jun 22 18:08:00 2012] rmf not generated due to insufficient counts
[Fri Jun 22 18:19:39 2012] Updating aperture counts using extracted products
[Fri Jun 22 18:19:39 2012] Error reading totcts from fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src100_src_b10.pi.gz
[Fri Jun 22 18:19:42 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 18:19:42 2012] Using photon index=1.80, rate=0.171, arf fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src100.arf
[Fri Jun 22 18:19:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 18:19:42 2012] Updating source flux to 8.3e-13
[Fri Jun 22 18:19:54 2012] Flag b found in src. 100 procflags, skipping spectral fitting
[Fri Jun 22 18:19:54 2012] Flag c found in src. 100 procflags, skipping spectral fitting
[Fri Jun 22 18:19:54 2012] Source 100 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 22 18:21:36 2012] xmm0059751801/analysis//spectral/fullrun_pn_xmm0059751801_pi300-10000_pass1_cl_src100_pl.csv not found, spectral fit skipped or did not complete