[Tue Oct  4 20:15:51 2011] Detection parameters:
  Position = (285.9, 309.1) = 12 19 1.68 47 17 16.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 956.3 +/- 39.7
  Background counts = 42.7
  Rate = 0.08 +/- 0.003

[Tue Oct  4 20:15:53 2011] Off-axis axis estimate = 1.19'
[Tue Oct  4 20:19:27 2011] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 20:19:27 2011] Initial guess for spatial extent in simple fitting = 7.02"
[Tue Oct  4 20:19:27 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.895
[Tue Oct  4 20:19:27 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 7.02"
[Tue Oct  4 22:16:01 2011] fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_src8.ximg exists
[Tue Oct  4 22:16:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_src8.csv
[Tue Oct  4 22:16:01 2011] fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_src8_1.ximg exists
[Tue Oct  4 22:16:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_src8.csv
[Tue Oct  4 22:16:01 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 22:16:02 2011] fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Tue Oct  4 22:16:02 2011] fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Tue Oct  4 22:16:02 2011] Fit fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Wed Oct  5 01:15:06 2011] Spatial fit model total counts = 2776.260000, observed total counts = 2799.000000
[Wed Oct  5 01:15:06 2011] Offset between fit and detection position for source 8 = 4.702757 pixels
[Wed Oct  5 01:15:06 2011] 3050.360000 total counts/ 1737.410000 bgd. counts: snr = 31.499019
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 4.702757 pixels
  Position = (282.0, 306.5) = 12 19 3.36 47 17 5.0
  Extent = 14.0 (14.0-28.1)", rotation angle = 0
  Source counts = 1313.0 +/- 55.2
  Background counts = 1737.4
  Rate = 0.1 +/- 0.005
[Wed Oct  5 01:15:06 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 01:15:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 01:15:06 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 01:15:06 2011] Source does appear to be extended
[Wed Oct  5 01:15:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 01:15:28 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 01:15:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 01:15:28 2011] Initial guess for spatial extent in simple fitting = 14.05"
[Wed Oct  5 01:15:28 2011] source mask rpix=3.2, npix_max = 55, mask sum = 48, frac = 0.863
[Wed Oct  5 01:15:28 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 14.05"
[Wed Oct  5 03:18:09 2011] fullrun_pn_xmm0059140901_pi300-10000_cl_pass1_src8.ximg exists
[Wed Oct  5 03:18:09 2011] fullrun_pn_xmm0059140901_pi300-10000_cl_pass1_src8_1.ximg exists
[Wed Oct  5 03:18:09 2011] Fit fullrun_pn_xmm0059140901_pi300-10000_cl_pass1_src8 appears to have run properly
[Wed Oct  5 03:18:09 2011] fullrun_pn_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Wed Oct  5 03:18:09 2011] fullrun_pn_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Wed Oct  5 03:18:09 2011] Fit fullrun_pn_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Wed Oct  5 06:45:33 2011] Spatial fit model total counts = 2773.960000, observed total counts = 2771.000000
[Wed Oct  5 06:45:33 2011] Offset between fit and detection position for source 8 = 6.122269 pixels
[Wed Oct  5 06:45:33 2011] 2790.650000 total counts/ 1090.010000 bgd. counts: snr = 51.510664
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 6.122269 pixels
  Position = (286.5, 310.6) = 12 19 1.43 47 17 22.9
  Extent = 26.4 (23.5-28.1)" x 13.7 (12.3-15.3)", rotation angle = 147 (142-152) degrees
  Source counts = 1700.6 +/- 52.8
  Background counts = 1090.0
  Rate = 0.2 +/- 0.005
[Wed Oct  5 06:45:33 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 06:45:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 06:45:33 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 06:45:33 2011] Source does appear to be extended
[Wed Oct  5 06:45:33 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.53
[Wed Oct  5 06:45:33 2011] Source is asymmetric
[Wed Oct  5 06:45:33 2011] Source is confused with source 3
[Wed Oct  5 06:45:56 2011] Counts = 1700.640000, rescaling region sizes by 2.000000
[Wed Oct  5 06:45:56 2011] XMMSAS src. selection expression = ellipse(24877.276000, 26976.048000, 3167.916091, 1639.608047, 147.444000, X, Y)
[Wed Oct  5 06:45:56 2011] Writing source region out to fullrun_pn_xmm0059140901_pi300-10000_pass1_cl_src8_src.reg
[Wed Oct  5 06:45:56 2011] Extracting stamp from image fullrun_pn_xmm0059140901_pi300-10000_cl_sm2.00.img.gz, (104, 129) - (469, 493)
[Wed Oct  5 06:45:56 2011] XMMSAS bgd. selection expression = annulus(24877.276000, 26976.048000, 10559.720304, 21119.440608, X, Y) && !ellipse(35642.814600, 25578.981140, 463.541613, 463.541613, 0.000000, X, Y) && !ellipse(20403.578308, 17699.203964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25667.412400, 27985.913000, 502.836814, 502.836814, 0.000000, X, Y) && !ellipse(14544.052109, 31245.167419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26748.952301, 29009.826569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26428.142000, 28926.138600, 1242.208036, 1242.208036, 0.000000, X, Y) && !ellipse(24153.604600, 28399.428000, 812.456023, 812.456023, 0.000000, X, Y) && !ellipse(25592.013400, 25440.764800, 497.324014, 497.324014, 0.000000, X, Y) && !ellipse(27689.873444, 31220.419891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25905.766800, 31798.125400, 460.101613, 460.101613, 0.000000, X, Y) && !ellipse(28140.872000, 28450.594000, 1246.608036, 1246.608036, 0.000000, X, Y) && !ellipse(28448.131800, 27136.806600, 441.886413, 441.886413, 0.000000, X, Y) && !ellipse(26193.092600, 26294.318700, 559.971216, 320.863209, 14.712500, X, Y) && !ellipse(28122.043182, 35291.981659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23516.924072, 37552.529358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23136.182000, 12755.042000, 1946.464056, 1050.952030, 15.657400, X, Y) && !ellipse(25584.410000, 29509.690000, 734.516021, 734.516021, 0.000000, X, Y) && !ellipse(25128.072845, 29004.593506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28020.480600, 28543.184000, 1227.184035, 1227.184035, 0.000000, X, Y) && !ellipse(23472.826691, 26523.935913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27296.930400, 26205.945200, 379.696011, 379.696011, 0.000000, X, Y) && !ellipse(18588.433700, 21223.563400, 460.506413, 460.506413, 0.000000, X, Y) && !ellipse(38909.415800, 20675.090000, 550.178416, 550.178416, 0.000000, X, Y) && !ellipse(29292.549600, 13832.360000, 423.309612, 423.309612, 0.000000, X, Y) && !ellipse(33931.376000, 38791.835800, 472.694482, 472.694482, 0.000000, X, Y) && !ellipse(27503.572200, 36752.281000, 348.327798, 348.327798, 0.000000, X, Y) && !ellipse(28008.291400, 33972.852000, 401.399212, 401.399212, 0.000000, X, Y) && !ellipse(26217.185047, 33718.513927, 792.668695, 219.367968, 33.628868, X, Y) && !ellipse(25676.892600, 29864.842000, 1314.960038, 1314.960038, 0.000000, X, Y) && !ellipse(29371.932739, 29346.157715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23136.840698, 27887.821808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28065.129974, 27978.122009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27055.948029, 27710.317169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18665.183560, 27601.671800, 414.060012, 414.060012, 0.000000, X, Y) && !ellipse(26593.094116, 26929.263306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24207.801000, 25347.209600, 473.738414, 473.738414, 0.000000, X, Y) && !ellipse(24884.914642, 24561.285156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27947.307700, 23468.538400, 424.806412, 424.806412, 0.000000, X, Y) && !ellipse(35174.801941, 20405.223099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23464.309357, 12367.043579, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Oct  5 06:45:56 2011] Writing fullrun_pn_xmm0059140901_pi300-10000_pass1_cl_src8.gif
[Wed Oct  5 06:56:00 2011] Mean detx,y = (-592.63, -91.05) 
[Wed Oct  5 06:56:06 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 07:10:07 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 07:10:07 2011] Setting source spectrum file to fullrun_pn_xmm0059140901_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Oct  5 07:10:07 2011] Setting bgd. spectrum file to fullrun_pn_xmm0059140901_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed Oct  5 14:57:26 2011] Updating aperture counts using extracted products
[Wed Oct  5 14:57:26 2011] Error reading totcts from fullrun_pn_xmm0059140901_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed Oct  5 14:57:27 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 14:57:27 2011] Using photon index=1.80, rate=0.153, arf fullrun_pn_xmm0059140901_pi300-10000_pass1_cl_src8.arf
[Wed Oct  5 14:57:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 14:57:27 2011] Updating source flux to 4e-13
[Wed Oct  5 15:02:19 2011] Flag c found in src. 8 procflags, skipping spectral fitting