[Tue Oct  4 20:15:51 2011] Detection parameters:
  Position = (295.7, 322.1) = 12 18 57.50 47 18 14.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6173.7 +/- 93.7
  Background counts = 48.4
  Rate = 0.5 +/- 0.008

[Tue Oct  4 20:15:53 2011] Off-axis axis estimate = 1.73'
[Tue Oct  4 20:19:27 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 20:19:27 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Tue Oct  4 20:19:27 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Tue Oct  4 20:19:27 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.29"
[Tue Oct  4 22:16:01 2011] fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_src3.ximg exists
[Tue Oct  4 22:16:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_src3.csv
[Tue Oct  4 22:16:01 2011] fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Oct  4 22:16:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_src3.csv
[Tue Oct  4 22:16:01 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 22:16:02 2011] fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Oct  4 22:16:02 2011] fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Oct  4 22:16:02 2011] Fit fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct  5 01:15:06 2011] Spatial fit model total counts = 7707.730000, observed total counts = 7707.000000
[Wed Oct  5 01:15:06 2011] Offset between fit and detection position for source 3 = 0.172861 pixels
[Wed Oct  5 01:15:06 2011] 7688.770000 total counts/ 4079.010000 bgd. counts: snr = 56.519843
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.172861 pixels
  Position = (295.6, 322.2) = 12 18 57.55 47 18 13.4
  Extent = 6.3 (6.1-6.5)", rotation angle = 0
  Source counts = 3609.8 +/- 87.7
  Background counts = 4079.0
  Rate = 0.3 +/- 0.008
[Wed Oct  5 01:15:06 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 01:15:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 01:15:06 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 01:15:06 2011] Source does appear to be extended
[Wed Oct  5 01:15:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 01:15:28 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 01:15:28 2011] Initial guess for spatial extent in simple fitting = 6.28"
[Wed Oct  5 01:15:28 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.058
[Wed Oct  5 01:15:28 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 6.28"
[Wed Oct  5 03:18:08 2011] fullrun_pn_xmm0059140901_pi300-10000_cl_pass1_src3.ximg exists
[Wed Oct  5 03:18:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059140901_pi300-10000_cl_pass1_src3.csv
[Wed Oct  5 03:18:08 2011] fullrun_pn_xmm0059140901_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Oct  5 03:18:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059140901_pi300-10000_cl_pass1_src3.csv
[Wed Oct  5 03:18:08 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059140901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059140901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 03:18:09 2011] fullrun_pn_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Oct  5 03:18:09 2011] fullrun_pn_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Oct  5 03:18:09 2011] Fit fullrun_pn_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Oct  5 06:45:33 2011] Spatial fit model total counts = 7709.300000, observed total counts = 7707.000000
[Wed Oct  5 06:45:33 2011] Offset between fit and detection position for source 3 = 0.004779 pixels
[Wed Oct  5 06:45:33 2011] 7690.910000 total counts/ 4079.580000 bgd. counts: snr = 56.540474
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.004779 pixels
  Position = (295.6, 322.2) = 12 18 57.55 47 18 13.4
  Extent = 6.3 (6.1-6.6)", rotation angle = 0
  Source counts = 3611.3 +/- 87.7
  Background counts = 4079.6
  Rate = 0.3 +/- 0.008
[Wed Oct  5 06:45:33 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 06:45:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 06:45:33 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 06:45:33 2011] Source does appear to be extended
[Wed Oct  5 06:45:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 06:45:33 2011] Source is confused with source 8
[Wed Oct  5 06:45:56 2011] Counts = 3611.330000, rescaling region sizes by 2.000000
[Wed Oct  5 06:45:56 2011] XMMSAS src. selection expression = ellipse(25667.412400, 27985.913000, 754.255222, 754.255222, 0.000000, X, Y)
[Wed Oct  5 06:45:56 2011] Writing source region out to fullrun_pn_xmm0059140901_pi300-10000_pass1_cl_src3_src.reg
[Wed Oct  5 06:45:56 2011] Extracting stamp from image fullrun_pn_xmm0059140901_pi300-10000_cl_sm2.00.img.gz, (252, 279) - (339, 366)
[Wed Oct  5 06:45:56 2011] XMMSAS bgd. selection expression = annulus(25667.412400, 27985.913000, 2514.184072, 5028.368145, X, Y) && !ellipse(26748.952301, 29009.826569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26428.142000, 28926.138600, 1242.208036, 1242.208036, 0.000000, X, Y) && !ellipse(24153.604600, 28399.428000, 812.456023, 812.456023, 0.000000, X, Y) && !ellipse(24877.276000, 26976.048000, 2111.944061, 1093.072031, 147.444000, X, Y) && !ellipse(25592.013400, 25440.764800, 497.324014, 497.324014, 0.000000, X, Y) && !ellipse(27689.873444, 31220.419891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25905.766800, 31798.125400, 460.101613, 460.101613, 0.000000, X, Y) && !ellipse(28140.872000, 28450.594000, 1246.608036, 1246.608036, 0.000000, X, Y) && !ellipse(28448.131800, 27136.806600, 441.886413, 441.886413, 0.000000, X, Y) && !ellipse(26193.092600, 26294.318700, 559.971216, 320.863209, 14.712500, X, Y) && !ellipse(25584.410000, 29509.690000, 734.516021, 734.516021, 0.000000, X, Y) && !ellipse(25128.072845, 29004.593506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28020.480600, 28543.184000, 1227.184035, 1227.184035, 0.000000, X, Y) && !ellipse(23472.826691, 26523.935913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27296.930400, 26205.945200, 379.696011, 379.696011, 0.000000, X, Y) && !ellipse(26217.185047, 33718.513927, 792.668695, 219.367968, 33.628868, X, Y) && !ellipse(25676.892600, 29864.842000, 1314.960038, 1314.960038, 0.000000, X, Y) && !ellipse(29371.932739, 29346.157715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23136.840698, 27887.821808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28065.129974, 27978.122009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27055.948029, 27710.317169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26593.094116, 26929.263306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24207.801000, 25347.209600, 473.738414, 473.738414, 0.000000, X, Y) && !ellipse(24884.914642, 24561.285156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27947.307700, 23468.538400, 424.806412, 424.806412, 0.000000, X, Y)
[Wed Oct  5 06:45:56 2011] Writing fullrun_pn_xmm0059140901_pi300-10000_pass1_cl_src3.gif
[Wed Oct  5 06:46:45 2011] Mean detx,y = (57.28, -292.52) 
[Wed Oct  5 06:46:48 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 06:47:48 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 06:47:48 2011] Setting source spectrum file to fullrun_pn_xmm0059140901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Oct  5 06:47:48 2011] Setting bgd. spectrum file to fullrun_pn_xmm0059140901_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Oct  5 14:57:26 2011] Updating aperture counts using extracted products
[Wed Oct  5 14:57:26 2011] Error reading totcts from fullrun_pn_xmm0059140901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Oct  5 14:57:27 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 14:57:27 2011] Using photon index=1.80, rate=0.324, arf fullrun_pn_xmm0059140901_pi300-10000_pass1_cl_src3.arf
[Wed Oct  5 14:57:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 14:57:27 2011] Updating source flux to 8e-13
[Wed Oct  5 15:02:19 2011] Flag c found in src. 3 procflags, skipping spectral fitting