[Tue Oct  4 20:15:52 2011] Detection parameters:
  Position = (318.9, 330.0) = 12 18 47.58 47 18 47.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 224.8 +/- 22.8
  Background counts = 46.8
  Rate = 0.02 +/- 0.002

[Tue Oct  4 20:15:53 2011] Off-axis axis estimate = 2.73'
[Tue Oct  4 20:19:27 2011] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 20:19:27 2011] Initial guess for spatial extent in simple fitting = 7.79"
[Tue Oct  4 20:19:27 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.762
[Tue Oct  4 20:19:27 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 7.79"
[Tue Oct  4 22:16:01 2011] fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_src20.ximg exists
[Tue Oct  4 22:16:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_src20.csv
[Tue Oct  4 22:16:01 2011] fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_src20_1.ximg exists
[Tue Oct  4 22:16:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_src20.csv
[Tue Oct  4 22:16:01 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 22:16:02 2011] fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Tue Oct  4 22:16:02 2011] fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Tue Oct  4 22:16:02 2011] Fit fullrun_pn_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Wed Oct  5 01:15:06 2011] Warning, spatial fit 20 centroid is now closest to src. 12
[Wed Oct  5 01:15:06 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 01:15:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 01:15:06 2011] Assessing source extent using major
[Wed Oct  5 01:15:06 2011] Source does appear to be extended
[Wed Oct  5 01:15:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 01:15:06 2011] Source is confused with source 12
[Wed Oct  5 01:15:28 2011] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 01:15:28 2011] Initial guess for spatial extent in simple fitting = 7.79"
[Wed Oct  5 01:15:28 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.762
[Wed Oct  5 01:15:28 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 7.79"
[Wed Oct  5 03:18:09 2011] fullrun_pn_xmm0059140901_pi300-10000_cl_pass1_src20.ximg exists
[Wed Oct  5 03:18:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059140901_pi300-10000_cl_pass1_src20.csv
[Wed Oct  5 03:18:09 2011] fullrun_pn_xmm0059140901_pi300-10000_cl_pass1_src20_1.ximg exists
[Wed Oct  5 03:18:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059140901_pi300-10000_cl_pass1_src20.csv
[Wed Oct  5 03:18:09 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059140901_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059140901_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 03:18:10 2011] fullrun_pn_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Wed Oct  5 03:18:10 2011] fullrun_pn_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Wed Oct  5 03:18:10 2011] Fit fullrun_pn_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Wed Oct  5 06:45:33 2011] Warning, spatial fit 20 centroid is now closest to src. 12
[Wed Oct  5 06:45:33 2011] Spatial fit model total counts = 1153.860000, observed total counts = 1152.000000
[Wed Oct  5 06:45:33 2011] Offset between fit and detection position for source 20 = 3.965032 pixels
[Wed Oct  5 06:45:33 2011] Warning, changing simple spatial fit ID from 20 to 33
[Wed Oct  5 06:45:33 2011] 1126.520000 total counts/ 871.317000 bgd. counts: snr = 8.645651
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 3.965032 pixels
  Position = (322.6, 328.6) = 12 18 45.98 47 18 41.3
  Extent = 15.3" x 15.3", rotation angle = 0
  Source counts = 255.2 +/- 33.6
  Background counts = 871.3
  Rate = 0.02 +/- 0.003
[Wed Oct  5 06:45:33 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 06:45:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 06:45:33 2011] Assessing source extent using major
[Wed Oct  5 06:45:33 2011] Source does appear to be extended
[Wed Oct  5 06:45:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 06:45:57 2011] XMMSAS src. selection expression = ellipse(28020.480600, 28543.184000, 920.388026, 920.388026, 0.000000, X, Y)
[Wed Oct  5 06:45:57 2011] Writing source region out to fullrun_pn_xmm0059140901_pi300-10000_pass1_cl_src20_src.reg
[Wed Oct  5 06:45:57 2011] Extracting stamp from image fullrun_pn_xmm0059140901_pi300-10000_cl_sm2.00.img.gz, (270, 276) - (376, 382)
[Wed Oct  5 06:45:57 2011] XMMSAS bgd. selection expression = annulus(28020.480600, 28543.184000, 1533.980044, 3067.960088, X, Y) && !ellipse(25667.412400, 27985.913000, 502.836814, 502.836814, 0.000000, X, Y) && !ellipse(26748.952301, 29009.826569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26428.142000, 28926.138600, 1242.208036, 1242.208036, 0.000000, X, Y) && !ellipse(24153.604600, 28399.428000, 812.456023, 812.456023, 0.000000, X, Y) && !ellipse(24877.276000, 26976.048000, 2111.944061, 1093.072031, 147.444000, X, Y) && !ellipse(25592.013400, 25440.764800, 497.324014, 497.324014, 0.000000, X, Y) && !ellipse(27689.873444, 31220.419891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25905.766800, 31798.125400, 460.101613, 460.101613, 0.000000, X, Y) && !ellipse(28140.872000, 28450.594000, 1246.608036, 1246.608036, 0.000000, X, Y) && !ellipse(28448.131800, 27136.806600, 441.886413, 441.886413, 0.000000, X, Y) && !ellipse(26193.092600, 26294.318700, 559.971216, 320.863209, 14.712500, X, Y) && !ellipse(25584.410000, 29509.690000, 734.516021, 734.516021, 0.000000, X, Y) && !ellipse(25128.072845, 29004.593506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27296.930400, 26205.945200, 379.696011, 379.696011, 0.000000, X, Y) && !ellipse(25676.892600, 29864.842000, 1314.960038, 1314.960038, 0.000000, X, Y) && !ellipse(29371.932739, 29346.157715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28065.129974, 27978.122009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27055.948029, 27710.317169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26593.094116, 26929.263306, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Oct  5 06:45:57 2011] Writing fullrun_pn_xmm0059140901_pi300-10000_pass1_cl_src20.gif
[Wed Oct  5 07:16:11 2011] Mean detx,y = (2164.32, 758.14) 
[Wed Oct  5 07:16:13 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 07:16:32 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 07:16:32 2011] Setting source spectrum file to fullrun_pn_xmm0059140901_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Oct  5 07:16:32 2011] Setting bgd. spectrum file to fullrun_pn_xmm0059140901_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Wed Oct  5 14:57:26 2011] Updating aperture counts using extracted products
[Wed Oct  5 14:57:26 2011] Error reading totcts from fullrun_pn_xmm0059140901_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Oct  5 14:57:27 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 14:57:27 2011] Using photon index=1.80, rate=0.0229, arf fullrun_pn_xmm0059140901_pi300-10000_pass1_cl_src20.arf
[Wed Oct  5 14:57:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 14:57:27 2011] Updating source flux to 5.5e-14
[Wed Oct  5 15:02:19 2011] Flag c found in src. 20 procflags, skipping spectral fitting