[Tue Oct  4 20:17:20 2011] Detection parameters:
  Position = (286.9, 309.1) = 12 19 1.24 47 17 16.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 349.1 +/- 24.1
  Background counts = 14.5
  Rate = 0.02 +/- 0.002

[Tue Oct  4 20:17:22 2011] Off-axis axis estimate = 1.13'
[Tue Oct  4 23:42:55 2011] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 23:42:55 2011] Initial guess for spatial extent in simple fitting = 7.00"
[Tue Oct  4 23:42:55 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.900
[Tue Oct  4 23:42:55 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 7.00"
[Wed Oct  5 01:14:56 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_src5.ximg exists
[Wed Oct  5 01:14:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_src5.csv
[Wed Oct  5 01:14:56 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Oct  5 01:14:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_src5.csv
[Wed Oct  5 01:14:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 01:14:56 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Oct  5 01:14:56 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Oct  5 01:14:56 2011] Fit fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Oct  5 01:15:19 2011] Warning, spatial fit 5 centroid is now closest to src. 8
[Wed Oct  5 01:15:19 2011] Source 7 is offset by -4.811221 and -7.216613 pixels which is larger than
2 X fitted extent = 6.272552 x 6.272552, not incorporating fit results
[Wed Oct  5 01:15:19 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 01:15:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 01:15:19 2011] Assessing source extent using major
[Wed Oct  5 01:15:19 2011] Source does appear to be extended
[Wed Oct  5 01:15:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 01:15:19 2011] Source is confused with source 8
[Wed Oct  5 04:48:46 2011] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 04:48:46 2011] Initial guess for spatial extent in simple fitting = 7.00"
[Wed Oct  5 04:48:46 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.900
[Wed Oct  5 04:48:46 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 7.00"
[Wed Oct  5 06:45:22 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_src5.ximg exists
[Wed Oct  5 06:45:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_src5.csv
[Wed Oct  5 06:45:22 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Oct  5 06:45:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_src5.csv
[Wed Oct  5 06:45:22 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 06:45:23 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Oct  5 06:45:23 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Oct  5 06:45:23 2011] Fit fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Oct  5 06:45:46 2011] Warning, spatial fit 5 centroid is now closest to src. 8
[Wed Oct  5 06:45:46 2011] Spatial fit model total counts = 1331.020000, observed total counts = 1332.000000
[Wed Oct  5 06:45:46 2011] Offset between fit and detection position for source 7 = 1.581249 pixels
[Wed Oct  5 06:45:46 2011] Warning, changing simple spatial fit ID from 5 to 8
[Wed Oct  5 06:45:46 2011] 1216.734000 total counts/ 644.971000 bgd. counts: snr = 22.513652
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 1.581249 pixels
  Position = (285.4, 309.0) = 12 19 1.92 47 17 15.9
  Extent = 28.0 (27.2-56.0)" x 9.9 (8.8-11.2)", rotation angle = 149 (145-154) degrees
  Source counts = 571.8 +/- 34.9
  Background counts = 645.0
  Rate = 0.04 +/- 0.002
[Wed Oct  5 06:45:46 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 06:45:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 06:45:46 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 06:45:46 2011] Source does appear to be extended
[Wed Oct  5 06:45:46 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.43
[Wed Oct  5 06:45:46 2011] Source is asymmetric
[Wed Oct  5 13:42:13 2011] XMMSAS src. selection expression = ellipse(24778.632000, 26835.479200, 1678.956048, 595.774817, 149.040000, X, Y)
[Wed Oct  5 13:42:13 2011] Writing source region out to fullrun_mos2_xmm0059140901_pi300-10000_pass1_cl_src7_src.reg
[Wed Oct  5 13:42:13 2011] Extracting stamp from image fullrun_mos2_xmm0059140901_pi300-10000_cl_sm2.00.img.gz, (189, 213) - (382, 406)
[Wed Oct  5 13:42:13 2011] XMMSAS bgd. selection expression = annulus(24778.632000, 26835.479200, 2798.260081, 5596.520161, X, Y) && !ellipse(25685.499600, 27990.339400, 418.971212, 418.971212, 0.000000, X, Y) && !ellipse(27701.680359, 31178.146515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25596.737280, 25445.713600, 409.907212, 409.907212, 0.000000, X, Y) && !ellipse(26238.137939, 28856.270294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26665.028000, 29262.820000, 1225.800035, 1225.800035, 0.000000, X, Y) && !ellipse(24512.064000, 26596.188000, 1119.304032, 1119.304032, 0.000000, X, Y) && !ellipse(25909.748539, 31784.377270, 391.948189, 320.018904, 339.239592, X, Y) && !ellipse(26203.451800, 26301.284800, 530.004015, 371.957611, 7.585160, X, Y) && !ellipse(28451.665400, 27123.139200, 378.436011, 378.436011, 0.000000, X, Y) && !ellipse(24117.054000, 28410.726400, 925.664027, 925.664027, 0.000000, X, Y) && !ellipse(24075.424400, 26501.528000, 1181.584034, 1181.584034, 0.000000, X, Y) && !ellipse(28103.503400, 28151.552000, 1400.344040, 1400.344040, 0.000000, X, Y) && !ellipse(27314.083400, 26220.620800, 249.910407, 249.910407, 0.000000, X, Y) && !ellipse(18544.636978, 21173.013763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25807.866547, 26852.116119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27902.838654, 29353.044861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26483.173248, 27032.212067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28760.726800, 29399.282000, 1337.032038, 1337.032038, 0.000000, X, Y) && !ellipse(28375.876000, 29897.553260, 962.448028, 962.448028, 0.000000, X, Y) && !ellipse(28110.135376, 29798.041046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25569.386505, 29621.532043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28631.583130, 28061.333282, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Oct  5 13:42:13 2011] Writing fullrun_mos2_xmm0059140901_pi300-10000_pass1_cl_src7.gif
[Wed Oct  5 13:43:16 2011] Mean detx,y = (1466.61, -166.19) 
[Wed Oct  5 13:43:17 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 13:43:48 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 13:43:48 2011] Setting source spectrum file to fullrun_mos2_xmm0059140901_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Oct  5 13:43:48 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0059140901_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Oct  5 14:57:28 2011] Updating aperture counts using extracted products
[Wed Oct  5 14:57:28 2011] Error reading totcts from fullrun_mos2_xmm0059140901_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Oct  5 14:57:28 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 14:57:28 2011] Using photon index=1.80, rate=0.038, arf fullrun_mos2_xmm0059140901_pi300-10000_pass1_cl_src7.arf
[Wed Oct  5 14:57:28 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 14:57:28 2011] Updating source flux to 4e-13
[Wed Oct  5 15:00:07 2011] Flag b found in src. 7 procflags, skipping spectral fitting
[Wed Oct  5 15:00:07 2011] Flag c found in src. 7 procflags, skipping spectral fitting