[Tue Oct  4 20:17:22 2011] Detection parameters:
  Position = (327.7, 312.2) = 12 18 43.83 47 17 30.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 172.9 +/- 16.6
  Background counts = 12.5
  Rate = 0.01 +/- 0.001

[Tue Oct  4 20:17:22 2011] Off-axis axis estimate = 2.34'
[Tue Oct  4 23:42:55 2011] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 23:42:55 2011] Initial guess for spatial extent in simple fitting = 7.60"
[Tue Oct  4 23:42:55 2011] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.990
[Tue Oct  4 23:42:55 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 7.60"
[Wed Oct  5 01:14:56 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_src13.ximg exists
[Wed Oct  5 01:14:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_src13.csv
[Wed Oct  5 01:14:56 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed Oct  5 01:14:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_src13.csv
[Wed Oct  5 01:14:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 01:14:56 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed Oct  5 01:14:56 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed Oct  5 01:14:56 2011] Fit fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Wed Oct  5 01:15:19 2011] Spatial fit model total counts = 324.521000, observed total counts = 325.000000
[Wed Oct  5 01:15:19 2011] Offset between fit and detection position for source 30 = 0.132410 pixels
[Wed Oct  5 01:15:19 2011] 329.170000 total counts/ 229.016000 bgd. counts: snr = 6.618131
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.132410 pixels
  Position = (327.6, 312.3) = 12 18 43.87 47 17 30.2
  Extent = 4.7 (4.0-5.7)", rotation angle = 0
  Source counts = 100.2 +/- 18.1
  Background counts = 229.0
  Rate = 0.007 +/- 0.001
[Wed Oct  5 01:15:19 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 01:15:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 01:15:19 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 01:15:19 2011] Source does appear to be extended
[Wed Oct  5 01:15:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 04:48:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 04:48:46 2011] Initial guess for spatial extent in simple fitting = 4.73"
[Wed Oct  5 04:48:46 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.893
[Wed Oct  5 04:48:46 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 4.73"
[Wed Oct  5 06:45:22 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_src13.ximg exists
[Wed Oct  5 06:45:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_src13.csv
[Wed Oct  5 06:45:22 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed Oct  5 06:45:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_src13.csv
[Wed Oct  5 06:45:22 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 06:45:23 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed Oct  5 06:45:23 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Oct  5 06:45:23 2011] Fit fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Wed Oct  5 06:45:46 2011] Warning, spatial fit 13 centroid is now closest to src. 26
[Wed Oct  5 06:45:46 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 06:45:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 06:45:46 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 06:45:46 2011] Source does appear to be extended
[Wed Oct  5 06:45:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 13:42:13 2011] XMMSAS src. selection expression = ellipse(28451.665400, 27123.139200, 283.827008, 283.827008, 0.000000, X, Y)
[Wed Oct  5 13:42:13 2011] Writing source region out to fullrun_mos2_xmm0059140901_pi300-10000_pass1_cl_src30_src.reg
[Wed Oct  5 13:42:13 2011] Extracting stamp from image fullrun_mos2_xmm0059140901_pi300-10000_cl_sm2.00.img.gz, (311, 296) - (344, 329)
[Wed Oct  5 13:42:13 2011] XMMSAS bgd. selection expression = annulus(28451.665400, 27123.139200, 473.045014, 946.090027, X, Y) && !ellipse(26665.028000, 29262.820000, 1225.800035, 1225.800035, 0.000000, X, Y) && !ellipse(28103.503400, 28151.552000, 1400.344040, 1400.344040, 0.000000, X, Y) && !ellipse(27314.083400, 26220.620800, 249.910407, 249.910407, 0.000000, X, Y) && !ellipse(28760.726800, 29399.282000, 1337.032038, 1337.032038, 0.000000, X, Y) && !ellipse(28631.583130, 28061.333282, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Oct  5 13:42:13 2011] Writing fullrun_mos2_xmm0059140901_pi300-10000_pass1_cl_src30.gif
[Wed Oct  5 13:45:24 2011] Mean detx,y = (-1536.72, -2292.77) 
[Wed Oct  5 13:45:25 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 13:45:33 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 13:45:33 2011] Setting source spectrum file to fullrun_mos2_xmm0059140901_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Wed Oct  5 13:45:33 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0059140901_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Wed Oct  5 14:57:28 2011] Updating aperture counts using extracted products
[Wed Oct  5 14:57:28 2011] Error reading totcts from fullrun_mos2_xmm0059140901_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Wed Oct  5 14:57:28 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 14:57:28 2011] Using photon index=1.80, rate=0.00665, arf fullrun_mos2_xmm0059140901_pi300-10000_pass1_cl_src30.arf
[Wed Oct  5 14:57:28 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 14:57:28 2011] Updating source flux to 8e-14