[Tue Oct  4 20:17:21 2011] Detection parameters:
  Position = (319.1, 330.9) = 12 18 47.51 47 18 51.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.0 +/- 14.3
  Background counts = 13.6
  Rate = 0.007 +/- 0.0009

[Tue Oct  4 20:17:22 2011] Off-axis axis estimate = 2.79'
[Tue Oct  4 23:42:55 2011] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 23:42:55 2011] Initial guess for spatial extent in simple fitting = 7.82"
[Tue Oct  4 23:42:55 2011] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.757
[Tue Oct  4 23:42:55 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 7.82"
[Wed Oct  5 01:14:56 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_src17.ximg exists
[Wed Oct  5 01:14:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_src17.csv
[Wed Oct  5 01:14:56 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed Oct  5 01:14:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_src17.csv
[Wed Oct  5 01:14:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 01:14:57 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed Oct  5 01:14:57 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Oct  5 01:14:57 2011] Fit fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Wed Oct  5 01:15:19 2011] Spatial fit model total counts = 599.104000, observed total counts = 597.000000
[Wed Oct  5 01:15:19 2011] Offset between fit and detection position for source 24 = 5.446484 pixels
[Wed Oct  5 01:15:19 2011] 576.814000 total counts/ 421.017000 bgd. counts: snr = 7.592928
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 5.446484 pixels
  Position = (323.1, 327.3) = 12 18 45.77 47 18 35.5
  Extent = 15.6 (15.5-15.6)", rotation angle = 0
  Source counts = 155.8 +/- 24.0
  Background counts = 421.0
  Rate = 0.01 +/- 0.002
[Wed Oct  5 01:15:19 2011] Spatial fit model total counts = 458.713000, observed total counts = 456.000000
[Wed Oct  5 01:15:19 2011] Offset between fit and detection position for source 24 = 1.828147 pixels
[Wed Oct  5 01:15:19 2011] Warning, changing simple spatial fit ID from 17 to 18
[Wed Oct  5 01:15:19 2011] 456.577000 total counts/ 302.277000 bgd. counts: snr = 8.874898
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 1.828147 pixels
  Position = (322.5, 325.6) = 12 18 46.02 47 18 28.0
  Extent = 15.3 (15.0-30.6)", rotation angle = 0
  Source counts = 154.3 +/- 21.4
  Background counts = 302.3
  Rate = 0.01 +/- 0.001
[Wed Oct  5 01:15:19 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 01:15:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 01:15:19 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 01:15:19 2011] Source does appear to be extended
[Wed Oct  5 01:15:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 01:15:19 2011] Source is confused with source 27
[Wed Oct  5 01:15:19 2011] Source is confused with source 26
[Wed Oct  5 04:48:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 04:48:46 2011] Initial guess for spatial extent in simple fitting = 15.30"
[Wed Oct  5 04:48:46 2011] source mask rpix=3.5, npix_max = 64, mask sum = 55, frac = 0.852
[Wed Oct  5 04:48:46 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 15.30"
[Wed Oct  5 06:45:22 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_src17.ximg exists
[Wed Oct  5 06:45:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_src17.csv
[Wed Oct  5 06:45:22 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_src17_1.ximg exists
[Wed Oct  5 06:45:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_src17.csv
[Wed Oct  5 06:45:22 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 06:45:23 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Wed Oct  5 06:45:23 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Wed Oct  5 06:45:23 2011] Fit fullrun_mos2_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Wed Oct  5 06:45:46 2011] Spatial fit model total counts = 893.108000, observed total counts = 891.000000
[Wed Oct  5 06:45:46 2011] Offset between fit and detection position for source 24 = 1.779544 pixels
[Wed Oct  5 06:45:46 2011] 862.393000 total counts/ 649.196000 bgd. counts: snr = 8.367451
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 1.779544 pixels
  Position = (323.6, 324.1) = 12 18 45.57 47 18 21.7
  Extent = 17.5 (13.5-26.8)", rotation angle = 0
  Source counts = 213.2 +/- 29.4
  Background counts = 649.2
  Rate = 0.01 +/- 0.002
[Wed Oct  5 06:45:46 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 06:45:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 06:45:46 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 06:45:46 2011] Source does appear to be extended
[Wed Oct  5 06:45:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 13:42:13 2011] XMMSAS src. selection expression = ellipse(28103.503400, 28151.552000, 1050.258030, 1050.258030, 0.000000, X, Y)
[Wed Oct  5 13:42:13 2011] Writing source region out to fullrun_mos2_xmm0059140901_pi300-10000_pass1_cl_src24_src.reg
[Wed Oct  5 13:42:13 2011] Extracting stamp from image fullrun_mos2_xmm0059140901_pi300-10000_cl_sm2.00.img.gz, (263, 264) - (384, 384)
[Wed Oct  5 13:42:13 2011] XMMSAS bgd. selection expression = annulus(28103.503400, 28151.552000, 1750.430050, 3500.860101, X, Y) && !ellipse(25685.499600, 27990.339400, 418.971212, 418.971212, 0.000000, X, Y) && !ellipse(27701.680359, 31178.146515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25596.737280, 25445.713600, 409.907212, 409.907212, 0.000000, X, Y) && !ellipse(24778.632000, 26835.479200, 2238.608064, 794.366423, 149.040000, X, Y) && !ellipse(26238.137939, 28856.270294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26665.028000, 29262.820000, 1225.800035, 1225.800035, 0.000000, X, Y) && !ellipse(24512.064000, 26596.188000, 1119.304032, 1119.304032, 0.000000, X, Y) && !ellipse(25909.748539, 31784.377270, 391.948189, 320.018904, 339.239592, X, Y) && !ellipse(26203.451800, 26301.284800, 530.004015, 371.957611, 7.585160, X, Y) && !ellipse(28451.665400, 27123.139200, 378.436011, 378.436011, 0.000000, X, Y) && !ellipse(24117.054000, 28410.726400, 925.664027, 925.664027, 0.000000, X, Y) && !ellipse(24075.424400, 26501.528000, 1181.584034, 1181.584034, 0.000000, X, Y) && !ellipse(27314.083400, 26220.620800, 249.910407, 249.910407, 0.000000, X, Y) && !ellipse(25807.866547, 26852.116119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27902.838654, 29353.044861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26483.173248, 27032.212067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28760.726800, 29399.282000, 1337.032038, 1337.032038, 0.000000, X, Y) && !ellipse(28375.876000, 29897.553260, 962.448028, 962.448028, 0.000000, X, Y) && !ellipse(28110.135376, 29798.041046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25569.386505, 29621.532043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28631.583130, 28061.333282, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Oct  5 13:42:13 2011] Writing fullrun_mos2_xmm0059140901_pi300-10000_pass1_cl_src24.gif
[Wed Oct  5 13:46:15 2011] Mean detx,y = (-1900.09, -1193.39) 
[Wed Oct  5 13:46:16 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 13:46:26 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 13:46:26 2011] Setting source spectrum file to fullrun_mos2_xmm0059140901_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Wed Oct  5 13:46:26 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0059140901_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Wed Oct  5 14:57:28 2011] Updating aperture counts using extracted products
[Wed Oct  5 14:57:28 2011] Error reading totcts from fullrun_mos2_xmm0059140901_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Wed Oct  5 14:57:28 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 14:57:28 2011] Using photon index=1.80, rate=0.0142, arf fullrun_mos2_xmm0059140901_pi300-10000_pass1_cl_src24.arf
[Wed Oct  5 14:57:28 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 14:57:29 2011] Updating source flux to 1.3e-13
[Wed Oct  5 15:00:07 2011] Flag c found in src. 24 procflags, skipping spectral fitting