[Tue Oct  4 20:17:21 2011] Detection parameters:
  Position = (319.9, 351.4) = 12 18 47.13 47 20 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.8 +/- 11.0
  Background counts = 12.5
  Rate = 0.004 +/- 0.0008

[Tue Oct  4 20:17:22 2011] Off-axis axis estimate = 4.15'
[Tue Oct  4 23:42:55 2011] Using EEF radius (= 8.50 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 23:42:55 2011] Initial guess for spatial extent in simple fitting = 8.50"
[Tue Oct  4 23:42:55 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.038
[Tue Oct  4 23:42:55 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 8.50"
[Wed Oct  5 01:14:56 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_src25.ximg exists
[Wed Oct  5 01:14:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_src25.csv
[Wed Oct  5 01:14:56 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_src25_1.ximg exists
[Wed Oct  5 01:14:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_src25.csv
[Wed Oct  5 01:14:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 01:14:57 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Wed Oct  5 01:14:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src25.csv
[Wed Oct  5 01:14:57 2011] fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Wed Oct  5 01:14:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src25.csv
[Wed Oct  5 01:14:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 01:15:19 2011] Spatial fit model total counts = 549.690000, observed total counts = 549.000000
[Wed Oct  5 01:15:19 2011] Offset between fit and detection position for source 18 = 0.464613 pixels
[Wed Oct  5 01:15:19 2011] Warning, changing simple spatial fit ID from 25 to 2
[Wed Oct  5 01:15:19 2011] 569.288400 total counts/ 556.412000 bgd. counts: snr = 0.545879
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.464613 pixels
  Position = (320.0, 351.0) = 12 18 47.09 47 20 18.3
  Extent = 2.5 (2.2-4.4)", rotation angle = 0
  Source counts = 12.9 +/- 23.9
  Background counts = 556.4
  Rate = 0.0009 +/- 0.002
  Deleting source due to low Poisson probability