[Tue Oct  4 20:16:39 2011] Detection parameters:
  Position = (301.2, 332.0) = 12 18 55.13 47 18 56.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 425.0 +/- 26.9
  Background counts = 15.9
  Rate = 0.03 +/- 0.002

[Tue Oct  4 20:16:40 2011] Off-axis axis estimate = 2.44'
[Tue Oct  4 22:16:03 2011] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 22:16:03 2011] Initial guess for spatial extent in simple fitting = 7.65"
[Tue Oct  4 22:16:03 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.784
[Tue Oct  4 22:16:03 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 7.65"
[Tue Oct  4 23:42:54 2011] fullrun_mos1_xmm0059140901_pi300-10000_cl_pass0_src4.ximg exists
[Tue Oct  4 23:42:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0059140901_pi300-10000_cl_pass0_src4.csv
[Tue Oct  4 23:42:54 2011] fullrun_mos1_xmm0059140901_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Oct  4 23:42:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0059140901_pi300-10000_cl_pass0_src4.csv
[Tue Oct  4 23:42:54 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0059140901_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0059140901_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 23:42:55 2011] fullrun_mos1_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Oct  4 23:42:55 2011] fullrun_mos1_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Oct  4 23:42:55 2011] Fit fullrun_mos1_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Oct  5 01:15:13 2011] Spatial fit model total counts = 1499.550000, observed total counts = 1499.000000
[Wed Oct  5 01:15:13 2011] Offset between fit and detection position for source 6 = 6.786405 pixels
[Wed Oct  5 01:15:13 2011] 1557.074000 total counts/ 971.233000 bgd. counts: snr = 18.798277
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 6.786405 pixels
  Position = (296.9, 326.8) = 12 18 57.00 47 18 33.3
  Extent = 15.3 (15.3-15.3)", rotation angle = 0
  Source counts = 585.8 +/- 39.5
  Background counts = 971.2
  Rate = 0.04 +/- 0.003
[Wed Oct  5 01:15:13 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 01:15:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 01:15:13 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 01:15:13 2011] Source does appear to be extended
[Wed Oct  5 01:15:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 01:15:13 2011] Source is confused with source 3
[Wed Oct  5 03:18:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 03:18:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 03:18:10 2011] Initial guess for spatial extent in simple fitting = 15.30"
[Wed Oct  5 03:18:10 2011] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.992
[Wed Oct  5 03:18:10 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 15.30"
[Wed Oct  5 04:48:45 2011] fullrun_mos1_xmm0059140901_pi300-10000_cl_pass1_src4.ximg exists
[Wed Oct  5 04:48:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0059140901_pi300-10000_cl_pass1_src4.csv
[Wed Oct  5 04:48:45 2011] fullrun_mos1_xmm0059140901_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Oct  5 04:48:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0059140901_pi300-10000_cl_pass1_src4.csv
[Wed Oct  5 04:48:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0059140901_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0059140901_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 04:48:46 2011] fullrun_mos1_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Oct  5 04:48:46 2011] fullrun_mos1_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Oct  5 04:48:46 2011] Fit fullrun_mos1_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Oct  5 06:45:39 2011] Warning, spatial fit 4 centroid is now closest to src. 31
[Wed Oct  5 06:45:39 2011] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 10.636471 pixels away
[Wed Oct  5 06:45:39 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 06:45:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 06:45:39 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 06:45:39 2011] Source does appear to be extended
[Wed Oct  5 06:45:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 11:50:39 2011] XMMSAS src. selection expression = ellipse(25778.884000, 28383.968000, 917.832026, 917.832026, 0.000000, X, Y)
[Wed Oct  5 11:50:39 2011] Writing source region out to fullrun_mos1_xmm0059140901_pi300-10000_pass1_cl_src6_src.reg
[Wed Oct  5 11:50:39 2011] Extracting stamp from image fullrun_mos1_xmm0059140901_pi300-10000_cl_sm2.00.img.gz, (244, 274) - (350, 380)
[Wed Oct  5 11:50:39 2011] XMMSAS bgd. selection expression = annulus(25778.884000, 28383.968000, 1529.720044, 3059.440088, X, Y) && !ellipse(25678.031000, 27980.813800, 379.628011, 379.628011, 0.000000, X, Y) && !ellipse(27666.169600, 31194.272200, 415.255212, 415.255212, 0.000000, X, Y) && !ellipse(25602.623200, 25449.896000, 388.696811, 388.696811, 0.000000, X, Y) && !ellipse(24676.664764, 26748.445190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26277.000000, 28891.216000, 1242.160036, 1242.160036, 0.000000, X, Y) && !ellipse(28439.302600, 27106.153800, 405.674412, 405.674412, 0.000000, X, Y) && !ellipse(26244.276367, 26289.690643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24243.028000, 26760.403200, 2237.664064, 1410.000041, 142.209900, X, Y) && !ellipse(24445.702000, 28253.846800, 1226.272035, 1226.272035, 0.000000, X, Y) && !ellipse(28143.878000, 28264.384000, 1524.496044, 1524.496044, 101.579899, X, Y) && !ellipse(26828.974000, 29061.804000, 1924.272055, 1924.272055, 0.000000, X, Y) && !ellipse(27994.091200, 28498.082000, 1224.328035, 1224.328035, 0.000000, X, Y) && !ellipse(22988.684000, 26710.552000, 1146.624033, 1146.624033, 0.000000, X, Y) && !ellipse(27338.622280, 26245.033800, 422.024812, 422.024812, 0.000000, X, Y) && !ellipse(27370.390000, 29980.680000, 1363.640039, 1363.640039, 0.000000, X, Y) && !ellipse(28078.468842, 27901.450073, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Oct  5 11:50:39 2011] Writing fullrun_mos1_xmm0059140901_pi300-10000_pass1_cl_src6.gif
[Wed Oct  5 11:52:11 2011] Mean detx,y = (463.15, -73.65) 
[Wed Oct  5 11:52:14 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 11:52:31 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 11:52:32 2011] Setting source spectrum file to fullrun_mos1_xmm0059140901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Oct  5 11:52:32 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0059140901_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Oct  5 14:57:27 2011] Updating aperture counts using extracted products
[Wed Oct  5 14:57:27 2011] Error reading totcts from fullrun_mos1_xmm0059140901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Oct  5 14:57:28 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 14:57:28 2011] Using photon index=1.80, rate=0.0389, arf fullrun_mos1_xmm0059140901_pi300-10000_pass1_cl_src6.arf
[Wed Oct  5 14:57:28 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 14:57:28 2011] Updating source flux to 3.7e-13
[Wed Oct  5 14:57:30 2011] Flag c found in src. 6 procflags, skipping spectral fitting