[Tue Oct 4 20:16:40 2011] Detection parameters: Position = (319.5, 352.2) = 12 18 47.33 47 20 22.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 62.0 +/- 11.9 Background counts = 14.8 Rate = 0.004 +/- 0.0008 [Tue Oct 4 20:16:40 2011] Off-axis axis estimate = 4.19' [Tue Oct 4 22:16:03 2011] Using EEF radius (= 8.52 ")to estimate initial spatial extent for simple fitting [Tue Oct 4 22:16:03 2011] Initial guess for spatial extent in simple fitting = 8.52" [Tue Oct 4 22:16:03 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.033 [Tue Oct 4 22:16:03 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 8.52" [Tue Oct 4 23:42:55 2011] fullrun_mos1_xmm0059140901_pi300-10000_cl_pass0_src22.ximg exists [Tue Oct 4 23:42:55 2011] fullrun_mos1_xmm0059140901_pi300-10000_cl_pass0_src22_1.ximg exists [Tue Oct 4 23:42:55 2011] Fit fullrun_mos1_xmm0059140901_pi300-10000_cl_pass0_src22 appears to have run properly [Tue Oct 4 23:42:55 2011] fullrun_mos1_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src22.ximg exists [Tue Oct 4 23:42:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src22.csv [Tue Oct 4 23:42:55 2011] fullrun_mos1_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists [Tue Oct 4 23:42:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src22.csv [Tue Oct 4 23:42:55 2011] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src22_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Oct 5 01:15:13 2011] Source 31 is offset by 1.250881 and 6.657584 pixels which is larger than 2 X fitted extent = 7.837012 x 4.009991, not incorporating fit results [Wed Oct 5 01:15:13 2011] Vigneting correction estimate = 1.000000 [Wed Oct 5 01:15:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Oct 5 01:15:13 2011] Assessing source extent using major [Wed Oct 5 01:15:13 2011] Source does appear to be extended [Wed Oct 5 01:15:13 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Oct 5 01:15:13 2011] Source is confused with source 4 [Wed Oct 5 03:18:10 2011] Using EEF radius (= 8.52 ")to estimate initial spatial extent for simple fitting [Wed Oct 5 03:18:10 2011] Initial guess for spatial extent in simple fitting = 8.52" [Wed Oct 5 03:18:10 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.033 [Wed Oct 5 03:18:10 2011] Giving source the simple spatial ID 22 for pass 1, mean size = 8.52" [Wed Oct 5 04:48:46 2011] fullrun_mos1_xmm0059140901_pi300-10000_cl_pass1_src22.ximg exists [Wed Oct 5 04:48:46 2011] fullrun_mos1_xmm0059140901_pi300-10000_cl_pass1_src22_1.ximg exists [Wed Oct 5 04:48:46 2011] Fit fullrun_mos1_xmm0059140901_pi300-10000_cl_pass1_src22 appears to have run properly [Wed Oct 5 04:48:46 2011] fullrun_mos1_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src22.ximg exists [Wed Oct 5 04:48:46 2011] fullrun_mos1_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists [Wed Oct 5 04:48:46 2011] Fit fullrun_mos1_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly [Wed Oct 5 06:45:39 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 29.141089 pixels away [Wed Oct 5 06:45:39 2011] Spatial fit model total counts = 1121.940000, observed total counts = 1107.000000 [Wed Oct 5 06:45:39 2011] Offset between fit and detection position for source 31 = 9.253620 pixels [Wed Oct 5 06:45:39 2011] Warning, changing simple spatial fit ID from 22 to 16 [Wed Oct 5 06:45:39 2011] 846.907252 total counts/ 0.118252 bgd. counts: snr = 2462.470069 Spatial fit parameters: Offset between fit and detection position for source 31 = 9.253620 pixels Position = (314.1, 344.7) = 12 18 49.64 47 19 51.2 Extent = 24.2 (24.2-24.2)", rotation angle = 0 Source counts = 846.8 +/- 29.1 Background counts = 0.1 Rate = 0.06 +/- 0.002 [Wed Oct 5 06:45:39 2011] Source 31 is offset by 4.051264 and 2.217080 pixels which is larger than 2 X fitted extent = 1.770418 x 1.770418, not incorporating fit results [Wed Oct 5 06:45:39 2011] Spatial fit model total counts = 581.652000, observed total counts = 577.000000 [Wed Oct 5 06:45:39 2011] Offset between fit and detection position for source 31 = 1.176016 pixels [Wed Oct 5 06:45:39 2011] Warning, changing simple spatial fit ID from 16 to 22 [Wed Oct 5 06:45:39 2011] 646.208000 total counts/ 491.805000 bgd. counts: snr = 6.962405 Spatial fit parameters: Offset between fit and detection position for source 31 = 1.176016 pixels Position = (315.2, 345.2) = 12 18 49.17 47 19 53.1 Extent = 17.0 (17.0-34.1)", rotation angle = 0 Source counts = 154.4 +/- 25.4 Background counts = 491.8 Rate = 0.01 +/- 0.002 [Wed Oct 5 06:45:39 2011] Vigneting correction estimate = 1.000000 [Wed Oct 5 06:45:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Oct 5 06:45:39 2011] Assessing source extent using major axis lower bound [Wed Oct 5 06:45:39 2011] Source does appear to be extended [Wed Oct 5 06:45:39 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Oct 5 11:50:40 2011] XMMSAS src. selection expression = ellipse(27370.390000, 29980.680000, 1022.730029, 1022.730029, 0.000000, X, Y) [Wed Oct 5 11:50:40 2011] Writing source region out to fullrun_mos1_xmm0059140901_pi300-10000_pass1_cl_src31_src.reg [Wed Oct 5 11:50:40 2011] Extracting stamp from image fullrun_mos1_xmm0059140901_pi300-10000_cl_sm2.00.img.gz, (256, 286) - (374, 404) [Wed Oct 5 11:50:40 2011] XMMSAS bgd. selection expression = annulus(27370.390000, 29980.680000, 1704.550049, 3409.100098, X, Y) && !ellipse(25678.031000, 27980.813800, 379.628011, 379.628011, 0.000000, X, Y) && !ellipse(27666.169600, 31194.272200, 415.255212, 415.255212, 0.000000, X, Y) && !ellipse(25778.884000, 28383.968000, 1223.776035, 1223.776035, 0.000000, X, Y) && !ellipse(24676.664764, 26748.445190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26277.000000, 28891.216000, 1242.160036, 1242.160036, 0.000000, X, Y) && !ellipse(28439.302600, 27106.153800, 405.674412, 405.674412, 0.000000, X, Y) && !ellipse(26244.276367, 26289.690643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25930.676800, 31809.118000, 314.711209, 314.711209, 0.000000, X, Y) && !ellipse(24243.028000, 26760.403200, 2237.664064, 1410.000041, 142.209900, X, Y) && !ellipse(24445.702000, 28253.846800, 1226.272035, 1226.272035, 0.000000, X, Y) && !ellipse(28143.878000, 28264.384000, 1524.496044, 1524.496044, 101.579899, X, Y) && !ellipse(26828.974000, 29061.804000, 1924.272055, 1924.272055, 0.000000, X, Y) && !ellipse(27994.091200, 28498.082000, 1224.328035, 1224.328035, 0.000000, X, Y) && !ellipse(22988.684000, 26710.552000, 1146.624033, 1146.624033, 0.000000, X, Y) && !ellipse(27338.622280, 26245.033800, 422.024812, 422.024812, 0.000000, X, Y) && !ellipse(28078.468842, 27901.450073, 870.000000, 870.000000, 0.000000, X, Y) [Wed Oct 5 11:50:40 2011] Writing fullrun_mos1_xmm0059140901_pi300-10000_pass1_cl_src31.gif [Wed Oct 5 11:59:32 2011] Mean detx,y = (685.12, 2176.94) [Wed Oct 5 11:59:34 2011] Setting backscal keywords in source and bgd. spectrum [Wed Oct 5 11:59:49 2011] Binned source spectrum to 10 counts/bin [Wed Oct 5 11:59:49 2011] Setting source spectrum file to fullrun_mos1_xmm0059140901_pi300-10000_pass1_cl_src31_src_b10.pi.gz [Wed Oct 5 11:59:49 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0059140901_pi300-10000_pass1_cl_src31_bgd.pi.gz [Wed Oct 5 14:57:27 2011] Updating aperture counts using extracted products [Wed Oct 5 14:57:27 2011] Error reading totcts from fullrun_mos1_xmm0059140901_pi300-10000_pass1_cl_src31_src_b10.pi.gz [Wed Oct 5 14:57:28 2011] Calculating source flux in energy range 0.30-8.00 [Wed Oct 5 14:57:28 2011] Using photon index=1.80, rate=0.0103, arf fullrun_mos1_xmm0059140901_pi300-10000_pass1_cl_src31.arf [Wed Oct 5 14:57:28 2011] Assuming count rate is from the 0.30-10.00 bandpass [Wed Oct 5 14:57:28 2011] Updating source flux to 9.7e-14 [Wed Oct 5 14:57:30 2011] Flag b found in src. 31 procflags, skipping spectral fitting [Wed Oct 5 14:57:30 2011] Flag c found in src. 31 procflags, skipping spectral fitting