[Tue Oct  4 20:16:39 2011] Detection parameters:
  Position = (295.9, 322.1) = 12 18 57.42 47 18 13.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2471.8 +/- 60.4
  Background counts = 15.5
  Rate = 0.2 +/- 0.004

[Tue Oct  4 20:16:40 2011] Off-axis axis estimate = 1.72'
[Tue Oct  4 22:16:03 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Tue Oct  4 22:16:03 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Tue Oct  4 22:16:03 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Tue Oct  4 22:16:03 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Tue Oct  4 23:42:54 2011] fullrun_mos1_xmm0059140901_pi300-10000_cl_pass0_src1.ximg exists
[Tue Oct  4 23:42:54 2011] fullrun_mos1_xmm0059140901_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Oct  4 23:42:54 2011] Fit fullrun_mos1_xmm0059140901_pi300-10000_cl_pass0_src1 appears to have run properly
[Tue Oct  4 23:42:55 2011] fullrun_mos1_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Oct  4 23:42:55 2011] fullrun_mos1_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Oct  4 23:42:55 2011] Fit fullrun_mos1_xmm0059140901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct  5 01:15:13 2011] Spatial fit model total counts = 3203.150000, observed total counts = 3199.000000
[Wed Oct  5 01:15:13 2011] Offset between fit and detection position for source 3 = 0.180340 pixels
[Wed Oct  5 01:15:13 2011] 3187.460000 total counts/ 1799.650000 bgd. counts: snr = 32.714176
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.180340 pixels
  Position = (295.7, 322.1) = 12 18 57.50 47 18 13.0
  Extent = 5.1 (4.9-5.4)", rotation angle = 0
  Source counts = 1387.8 +/- 56.5
  Background counts = 1799.7
  Rate = 0.09 +/- 0.004
[Wed Oct  5 01:15:13 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 01:15:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 01:15:13 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 01:15:13 2011] Source does appear to be extended
[Wed Oct  5 01:15:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 01:15:13 2011] Source is confused with source 6
[Wed Oct  5 03:18:10 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 03:18:10 2011] Initial guess for spatial extent in simple fitting = 5.08"
[Wed Oct  5 03:18:10 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.077
[Wed Oct  5 03:18:10 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.08"
[Wed Oct  5 04:48:45 2011] fullrun_mos1_xmm0059140901_pi300-10000_cl_pass1_src1.ximg exists
[Wed Oct  5 04:48:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0059140901_pi300-10000_cl_pass1_src1.csv
[Wed Oct  5 04:48:45 2011] fullrun_mos1_xmm0059140901_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Oct  5 04:48:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0059140901_pi300-10000_cl_pass1_src1.csv
[Wed Oct  5 04:48:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0059140901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0059140901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 04:48:46 2011] fullrun_mos1_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct  5 04:48:46 2011] fullrun_mos1_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct  5 04:48:46 2011] Fit fullrun_mos1_xmm0059140901_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct  5 06:45:39 2011] Spatial fit model total counts = 3194.060000, observed total counts = 3199.000000
[Wed Oct  5 06:45:39 2011] Offset between fit and detection position for source 3 = 0.046243 pixels
[Wed Oct  5 06:45:39 2011] 2752.130000 total counts/ 1475.980000 bgd. counts: snr = 33.217083
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.046243 pixels
  Position = (295.7, 322.2) = 12 18 57.50 47 18 13.2
  Extent = 4.7 (4.4-5.0)", rotation angle = 0
  Source counts = 1276.2 +/- 52.5
  Background counts = 1476.0
  Rate = 0.08 +/- 0.003
[Wed Oct  5 06:45:39 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 06:45:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 06:45:39 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 06:45:39 2011] Source does appear to be extended
[Wed Oct  5 06:45:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 11:50:39 2011] Counts = 1276.150000, rescaling region sizes by 2.000000
[Wed Oct  5 11:50:39 2011] XMMSAS src. selection expression = ellipse(25678.031000, 27980.813800, 569.442016, 569.442016, 0.000000, X, Y)
[Wed Oct  5 11:50:39 2011] Writing source region out to fullrun_mos1_xmm0059140901_pi300-10000_pass1_cl_src3_src.reg
[Wed Oct  5 11:50:39 2011] Extracting stamp from image fullrun_mos1_xmm0059140901_pi300-10000_cl_sm2.00.img.gz, (263, 289) - (328, 355)
[Wed Oct  5 11:50:39 2011] XMMSAS bgd. selection expression = annulus(25678.031000, 27980.813800, 1898.140055, 3796.280109, X, Y) && !ellipse(27666.169600, 31194.272200, 415.255212, 415.255212, 0.000000, X, Y) && !ellipse(25778.884000, 28383.968000, 1223.776035, 1223.776035, 0.000000, X, Y) && !ellipse(25602.623200, 25449.896000, 388.696811, 388.696811, 0.000000, X, Y) && !ellipse(24676.664764, 26748.445190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26277.000000, 28891.216000, 1242.160036, 1242.160036, 0.000000, X, Y) && !ellipse(28439.302600, 27106.153800, 405.674412, 405.674412, 0.000000, X, Y) && !ellipse(26244.276367, 26289.690643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25930.676800, 31809.118000, 314.711209, 314.711209, 0.000000, X, Y) && !ellipse(24243.028000, 26760.403200, 2237.664064, 1410.000041, 142.209900, X, Y) && !ellipse(24445.702000, 28253.846800, 1226.272035, 1226.272035, 0.000000, X, Y) && !ellipse(28143.878000, 28264.384000, 1524.496044, 1524.496044, 101.579899, X, Y) && !ellipse(26828.974000, 29061.804000, 1924.272055, 1924.272055, 0.000000, X, Y) && !ellipse(27994.091200, 28498.082000, 1224.328035, 1224.328035, 0.000000, X, Y) && !ellipse(22988.684000, 26710.552000, 1146.624033, 1146.624033, 0.000000, X, Y) && !ellipse(27338.622280, 26245.033800, 422.024812, 422.024812, 0.000000, X, Y) && !ellipse(27370.390000, 29980.680000, 1363.640039, 1363.640039, 0.000000, X, Y) && !ellipse(28078.468842, 27901.450073, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Oct  5 11:50:39 2011] Writing fullrun_mos1_xmm0059140901_pi300-10000_pass1_cl_src3.gif
[Wed Oct  5 11:50:42 2011] Mean detx,y = (346.15, -253.76) 
[Wed Oct  5 11:50:43 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 11:50:58 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 11:50:58 2011] Setting source spectrum file to fullrun_mos1_xmm0059140901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Oct  5 11:50:58 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0059140901_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Oct  5 14:57:27 2011] Updating aperture counts using extracted products
[Wed Oct  5 14:57:27 2011] Error reading totcts from fullrun_mos1_xmm0059140901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Oct  5 14:57:27 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 14:57:27 2011] Using photon index=1.80, rate=0.0848, arf fullrun_mos1_xmm0059140901_pi300-10000_pass1_cl_src3.arf
[Wed Oct  5 14:57:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 14:57:28 2011] Updating source flux to 8.6e-13
[Wed Oct  5 14:57:30 2011] Flag c found in src. 3 procflags, skipping spectral fitting
[Wed Oct  5 15:00:07 2011] Reading fit data from xmm0059140901/analysis//spectral/fullrun_mos1_xmm0059140901_pi300-10000_pass1_cl_src3_pl.csv
[Wed Oct  5 15:00:07 2011] Spectral fit parameter nH value = 132551000000.0
[Wed Oct  5 15:00:07 2011] Spectral fit parameter PhoIndex value = -0.155234
[Wed Oct  5 15:00:07 2011] Failed to get F(0.3-8.0) from xmm0059140901/analysis//spectral/fullrun_mos1_xmm0059140901_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed Oct  5 15:00:07 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 15:00:07 2011] Using Nh = 1.3e+11, photon index=-0.16, rate=0.0848, arf fullrun_mos1_xmm0059140901_pi300-10000_pass1_cl_src3.arf
[Wed Oct  5 15:00:07 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 15:00:07 2011] Updating source flux to 2.3e-12