[Wed Oct 5 02:19:44 2011] Detection parameters: Position = (293.6, 246.8) = 12 18 57.89 47 16 8.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 376.2 +/- 28.2 Background counts = 111.6 Rate = 0.05 +/- 0.004 [Wed Oct 5 02:19:44 2011] Off-axis axis estimate = 3.76' [Wed Oct 5 02:22:28 2011] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting [Wed Oct 5 02:22:28 2011] Initial guess for spatial extent in simple fitting = 8.31" [Wed Oct 5 02:22:28 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.076 [Wed Oct 5 02:22:28 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 8.31" [Wed Oct 5 02:59:06 2011] fullrun_pn_xmm0059140401_pi300-10000_cl_pass0_src15.ximg exists [Wed Oct 5 02:59:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059140401_pi300-10000_cl_pass0_src15.csv [Wed Oct 5 02:59:06 2011] fullrun_pn_xmm0059140401_pi300-10000_cl_pass0_src15_1.ximg exists [Wed Oct 5 02:59:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059140401_pi300-10000_cl_pass0_src15.csv [Wed Oct 5 02:59:06 2011] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0059140401_pi300-10000_cl_pass0_src15_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0059140401_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Oct 5 02:59:06 2011] fullrun_pn_xmm0059140401_pi300-10000_cl_pass0_tfrozen_src15.ximg exists [Wed Oct 5 02:59:06 2011] fullrun_pn_xmm0059140401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists [Wed Oct 5 02:59:06 2011] Fit fullrun_pn_xmm0059140401_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly [Wed Oct 5 04:32:53 2011] Spatial fit model total counts = 483.825000, observed total counts = 482.000000 [Wed Oct 5 04:32:53 2011] Offset between fit and detection position for source 15 = 3.254892 pixels [Wed Oct 5 04:32:53 2011] Warning, changing simple spatial fit ID from 15 to 14 [Wed Oct 5 04:32:53 2011] 493.283300 total counts/ 432.805000 bgd. counts: snr = 2.907056 Spatial fit parameters: Offset between fit and detection position for source 15 = 3.254892 pixels Position = (294.9, 249.8) = 12 18 57.35 47 16 22.0 Extent = 15.6 (7.0-31.3)" x 7.2 (4.7-10.8)", rotation angle = 68 (25-90) degrees Source counts = 60.5 +/- 22.2 Background counts = 432.8 Rate = 0.02 +/- 0.007 [Wed Oct 5 04:32:53 2011] Vigneting correction estimate = 1.000000 [Wed Oct 5 04:32:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Oct 5 04:32:53 2011] Assessing source extent using major axis lower bound [Wed Oct 5 04:32:53 2011] Source does appear to be extended [Wed Oct 5 04:32:53 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.65 [Wed Oct 5 04:32:53 2011] Source is confused with source 14 [Wed Oct 5 04:33:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Oct 5 04:33:08 2011] Initial guess for spatial extent in simple fitting = 11.40" [Wed Oct 5 04:33:08 2011] source mask rpix=2.6, npix_max = 38, mask sum = 35, frac = 0.898 [Wed Oct 5 04:33:08 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 11.40" [Wed Oct 5 05:35:12 2011] fullrun_pn_xmm0059140401_pi300-10000_cl_pass1_src15.ximg exists [Wed Oct 5 05:35:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059140401_pi300-10000_cl_pass1_src15.csv [Wed Oct 5 05:35:12 2011] fullrun_pn_xmm0059140401_pi300-10000_cl_pass1_src15_1.ximg exists [Wed Oct 5 05:35:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059140401_pi300-10000_cl_pass1_src15.csv [Wed Oct 5 05:35:12 2011] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0059140401_pi300-10000_cl_pass1_src15_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0059140401_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Oct 5 05:35:12 2011] fullrun_pn_xmm0059140401_pi300-10000_cl_pass1_tfrozen_src15.ximg exists [Wed Oct 5 05:35:12 2011] fullrun_pn_xmm0059140401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists [Wed Oct 5 05:35:12 2011] Fit fullrun_pn_xmm0059140401_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly [Wed Oct 5 07:09:14 2011] Source 15 is offset by -1.093103 and -3.595287 pixels which is larger than 2 X fitted extent = 0.914671 x 0.914671, not incorporating fit results [Wed Oct 5 07:09:14 2011] Warning, spatial fit 15 centroid is now closest to src. 14 [Wed Oct 5 07:09:14 2011] Vigneting correction estimate = 1.000000 [Wed Oct 5 07:09:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Oct 5 07:09:14 2011] Assessing source extent using major axis lower bound [Wed Oct 5 07:09:14 2011] Source does appear to be extended [Wed Oct 5 07:09:14 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.65 [Wed Oct 5 07:09:29 2011] XMMSAS src. selection expression = ellipse(25608.050000, 21685.468000, 937.548027, 430.977012, 68.209000, X, Y) [Wed Oct 5 07:09:29 2011] Writing source region out to fullrun_pn_xmm0059140401_pi300-10000_pass1_cl_src15_src.reg [Wed Oct 5 07:09:29 2011] Extracting stamp from image fullrun_pn_xmm0059140401_pi300-10000_cl_sm2.00.img.gz, (241, 196) - (349, 304) [Wed Oct 5 07:09:29 2011] XMMSAS bgd. selection expression = annulus(25608.050000, 21685.468000, 1562.580045, 3125.160090, X, Y) && !ellipse(25568.767600, 23948.696000, 467.030413, 467.030413, 0.000000, X, Y) && !ellipse(27757.734000, 25771.066000, 1176.864034, 708.800820, 46.525990, X, Y) && !ellipse(26019.786000, 24630.084000, 1109.576032, 1109.576032, 0.000000, X, Y) && !ellipse(26718.410000, 25305.978000, 2203.224063, 2203.224063, 0.000000, X, Y) && !ellipse(24834.960266, 24912.179138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23959.251953, 22985.472168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24910.686000, 23201.456000, 1250.064036, 1250.064036, 0.000000, X, Y) && !ellipse(23995.878000, 22479.990000, 2500.128072, 2500.128072, 0.000000, X, Y) && !ellipse(26167.884000, 22257.330000, 464.313613, 464.313613, 0.000000, X, Y) [Wed Oct 5 07:09:29 2011] Writing fullrun_pn_xmm0059140401_pi300-10000_pass1_cl_src15.gif [Wed Oct 5 07:35:48 2011] Mean detx,y = (1135.01, -2311.54) [Wed Oct 5 07:35:50 2011] Setting backscal keywords in source and bgd. spectrum [Wed Oct 5 07:36:08 2011] Binned source spectrum to 10 counts/bin [Wed Oct 5 07:36:09 2011] Setting source spectrum file to fullrun_pn_xmm0059140401_pi300-10000_pass1_cl_src15_src_b10.pi.gz [Wed Oct 5 07:36:09 2011] Setting bgd. spectrum file to fullrun_pn_xmm0059140401_pi300-10000_pass1_cl_src15_bgd.pi.gz [Wed Oct 5 16:39:21 2011] Not generating rmf since there are only 60 counts [Wed Oct 5 16:39:21 2011] rmf not generated due to insufficient counts [Wed Oct 5 18:01:42 2011] Updating aperture counts using extracted products [Wed Oct 5 18:01:42 2011] Error reading totcts from fullrun_pn_xmm0059140401_pi300-10000_pass1_cl_src15_src_b10.pi.gz [Wed Oct 5 18:01:42 2011] Calculating source flux in energy range 0.30-8.00 [Wed Oct 5 18:01:42 2011] Using photon index=1.80, rate=0.0199, arf fullrun_pn_xmm0059140401_pi300-10000_pass1_cl_src15.arf [Wed Oct 5 18:01:42 2011] Assuming count rate is from the 0.30-10.00 bandpass [Wed Oct 5 18:01:42 2011] Updating source flux to 5.9e-14 [Wed Oct 5 18:05:04 2011] Flag b found in src. 15 procflags, skipping spectral fitting [Wed Oct 5 18:05:04 2011] Flag c found in src. 15 procflags, skipping spectral fitting [Wed Oct 5 18:05:04 2011] Source 15 has fewer than 100.000000 counts, skipping spectral fitting