[Wed Oct  5 02:19:44 2011] Detection parameters:
  Position = (294.5, 275.9) = 12 18 57.53 47 18 14.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3555.7 +/- 73.1
  Background counts = 133.1
  Rate = 0.4 +/- 0.009

[Wed Oct  5 02:19:44 2011] Off-axis axis estimate = 1.66'
[Wed Oct  5 02:22:28 2011] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 02:22:28 2011] Initial guess for spatial extent in simple fitting = 7.26"
[Wed Oct  5 02:22:28 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.063
[Wed Oct  5 02:22:28 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Wed Oct  5 02:59:06 2011] fullrun_pn_xmm0059140401_pi300-10000_cl_pass0_src1.ximg exists
[Wed Oct  5 02:59:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059140401_pi300-10000_cl_pass0_src1.csv
[Wed Oct  5 02:59:06 2011] fullrun_pn_xmm0059140401_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Oct  5 02:59:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059140401_pi300-10000_cl_pass0_src1.csv
[Wed Oct  5 02:59:06 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059140401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059140401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 02:59:06 2011] fullrun_pn_xmm0059140401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct  5 02:59:06 2011] fullrun_pn_xmm0059140401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct  5 02:59:06 2011] Fit fullrun_pn_xmm0059140401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct  5 04:32:53 2011] Spatial fit model total counts = 2841.570000, observed total counts = 2834.000000
[Wed Oct  5 04:32:53 2011] Offset between fit and detection position for source 1 = 0.057089 pixels
[Wed Oct  5 04:32:53 2011] 2846.400000 total counts/ 1701.270000 bgd. counts: snr = 27.763114
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.057089 pixels
  Position = (294.5, 275.8) = 12 18 57.54 47 18 15.2
  Extent = 5.8 (5.6-6.3)", rotation angle = 0
  Source counts = 1145.1 +/- 53.4
  Background counts = 1701.3
  Rate = 0.4 +/- 0.02
[Wed Oct  5 04:32:53 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 04:32:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 04:32:53 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 04:32:53 2011] Source does appear to be extended
[Wed Oct  5 04:32:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 04:32:53 2011] Source is confused with source 7
[Wed Oct  5 04:33:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 04:33:08 2011] Initial guess for spatial extent in simple fitting = 5.84"
[Wed Oct  5 04:33:08 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.883
[Wed Oct  5 04:33:08 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.84"
[Wed Oct  5 05:35:12 2011] fullrun_pn_xmm0059140401_pi300-10000_cl_pass1_src1.ximg exists
[Wed Oct  5 05:35:12 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0059140401_pi300-10000_cl_pass1_src1.csv
[Wed Oct  5 05:35:12 2011] fullrun_pn_xmm0059140401_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Oct  5 05:35:12 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0059140401_pi300-10000_cl_pass1_src1.csv
[Wed Oct  5 05:35:12 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059140401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059140401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 05:35:12 2011] fullrun_pn_xmm0059140401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct  5 05:35:12 2011] fullrun_pn_xmm0059140401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct  5 05:35:12 2011] Fit fullrun_pn_xmm0059140401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct  5 07:09:14 2011] Spatial fit model total counts = 2840.890000, observed total counts = 2834.000000
[Wed Oct  5 07:09:14 2011] Offset between fit and detection position for source 1 = 0.002699 pixels
[Wed Oct  5 07:09:14 2011] 2845.530000 total counts/ 1699.350000 bgd. counts: snr = 27.804264
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.002699 pixels
  Position = (294.5, 275.8) = 12 18 57.54 47 18 15.2
  Extent = 5.8 (5.5-6.3)", rotation angle = 0
  Source counts = 1146.2 +/- 53.3
  Background counts = 1699.3
  Rate = 0.4 +/- 0.02
[Wed Oct  5 07:09:14 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 07:09:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 07:09:14 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 07:09:14 2011] Source does appear to be extended
[Wed Oct  5 07:09:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 07:09:28 2011] Counts = 1146.180000, rescaling region sizes by 2.000000
[Wed Oct  5 07:09:28 2011] XMMSAS src. selection expression = ellipse(25568.767600, 23948.696000, 700.545620, 700.545620, 0.000000, X, Y)
[Wed Oct  5 07:09:28 2011] Writing source region out to fullrun_pn_xmm0059140401_pi300-10000_pass1_cl_src1_src.reg
[Wed Oct  5 07:09:28 2011] Extracting stamp from image fullrun_pn_xmm0059140401_pi300-10000_cl_sm2.00.img.gz, (254, 236) - (335, 316)
[Wed Oct  5 07:09:28 2011] XMMSAS bgd. selection expression = annulus(25568.767600, 23948.696000, 2335.152067, 4670.304134, X, Y) && !ellipse(25776.919460, 27789.708400, 611.136818, 611.136818, 0.000000, X, Y) && !ellipse(26760.049200, 25511.467980, 667.943219, 667.943219, 0.000000, X, Y) && !ellipse(27757.734000, 25771.066000, 1176.864034, 708.800820, 46.525990, X, Y) && !ellipse(26019.786000, 24630.084000, 1109.576032, 1109.576032, 0.000000, X, Y) && !ellipse(26718.410000, 25305.978000, 2203.224063, 2203.224063, 0.000000, X, Y) && !ellipse(24834.960266, 24912.179138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23959.251953, 22985.472168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24910.686000, 23201.456000, 1250.064036, 1250.064036, 0.000000, X, Y) && !ellipse(23995.878000, 22479.990000, 2500.128072, 2500.128072, 0.000000, X, Y) && !ellipse(26167.884000, 22257.330000, 464.313613, 464.313613, 0.000000, X, Y) && !ellipse(25608.050000, 21685.468000, 1250.064036, 574.636017, 68.209000, X, Y)
[Wed Oct  5 07:09:28 2011] Writing fullrun_pn_xmm0059140401_pi300-10000_pass1_cl_src1.gif
[Wed Oct  5 07:09:34 2011] Mean detx,y = (111.54, -129.79) 
[Wed Oct  5 07:09:36 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 07:10:18 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 07:10:18 2011] Setting source spectrum file to fullrun_pn_xmm0059140401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Oct  5 07:10:18 2011] Setting bgd. spectrum file to fullrun_pn_xmm0059140401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Oct  5 18:01:42 2011] Updating aperture counts using extracted products
[Wed Oct  5 18:01:42 2011] Error reading totcts from fullrun_pn_xmm0059140401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Oct  5 18:01:42 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 18:01:42 2011] Using photon index=1.80, rate=0.377, arf fullrun_pn_xmm0059140401_pi300-10000_pass1_cl_src1.arf
[Wed Oct  5 18:01:42 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 18:01:42 2011] Updating source flux to 9.4e-13
[Wed Oct  5 18:05:04 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Wed Oct  5 18:06:21 2011] Reading fit data from xmm0059140401/analysis//spectral/fullrun_pn_xmm0059140401_pi300-10000_pass1_cl_src1_pl.csv
[Wed Oct  5 18:06:21 2011] Spectral fit parameter nH value = 2.65095e+12
[Wed Oct  5 18:06:21 2011] Spectral fit parameter PhoIndex value = 0.237483
[Wed Oct  5 18:06:21 2011] Failed to get F(0.3-8.0) from xmm0059140401/analysis//spectral/fullrun_pn_xmm0059140401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Oct  5 18:06:21 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 18:06:21 2011] Using Nh = 2.7e+12, photon index=0.24, rate=0.377, arf fullrun_pn_xmm0059140401_pi300-10000_pass1_cl_src1.arf
[Wed Oct  5 18:06:21 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 18:06:21 2011] Updating source flux to 2.6e-12