[Wed Oct  5 13:56:14 2011] Detection parameters:
  Position = (292.8, 308.1) = 12 19 1.51 47 17 15.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 247.7 +/- 20.6
  Background counts = 10.9
  Rate = 0.02 +/- 0.002

[Wed Oct  5 13:56:15 2011] Off-axis axis estimate = 0.81'
[Wed Oct  5 16:13:29 2011] Using EEF radius (= 6.83 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 16:13:29 2011] Initial guess for spatial extent in simple fitting = 6.83"
[Wed Oct  5 16:13:29 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.933
[Wed Oct  5 16:13:29 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 6.83"
[Wed Oct  5 17:23:13 2011] fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_src5.ximg exists
[Wed Oct  5 17:23:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_src5.csv
[Wed Oct  5 17:23:13 2011] fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Oct  5 17:23:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_src5.csv
[Wed Oct  5 17:23:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 17:23:13 2011] fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Oct  5 17:23:13 2011] fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Oct  5 17:23:13 2011] Fit fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Oct  5 17:23:32 2011] Spatial fit model total counts = 1015.710000, observed total counts = 1013.000000
[Wed Oct  5 17:23:32 2011] Offset between fit and detection position for source 6 = 6.350350 pixels
[Wed Oct  5 17:23:32 2011] 1101.224000 total counts/ 773.145000 bgd. counts: snr = 11.799075
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 6.350350 pixels
  Position = (287.4, 304.9) = 12 19 3.85 47 17 1.0
  Extent = 13.7 (13.6-27.3)", rotation angle = 0
  Source counts = 328.1 +/- 33.2
  Background counts = 773.1
  Rate = 0.03 +/- 0.003
[Wed Oct  5 17:23:32 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 17:23:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 17:23:32 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 17:23:32 2011] Source does appear to be extended
[Wed Oct  5 17:23:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 17:23:32 2011] Source is confused with source 5
[Wed Oct  5 19:55:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 19:55:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 19:55:21 2011] Initial guess for spatial extent in simple fitting = 13.67"
[Wed Oct  5 19:55:21 2011] source mask rpix=3.1, npix_max = 53, mask sum = 56, frac = 1.055
[Wed Oct  5 19:55:21 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 13.67"
[Wed Oct  5 21:30:32 2011] fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_src5.ximg exists
[Wed Oct  5 21:30:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_src5.csv
[Wed Oct  5 21:30:32 2011] fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Oct  5 21:30:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_src5.csv
[Wed Oct  5 21:30:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 21:30:33 2011] fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Oct  5 21:30:33 2011] fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Oct  5 21:30:33 2011] Fit fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Oct  5 21:30:58 2011] Spatial fit model total counts = 948.842000, observed total counts = 963.000000
[Wed Oct  5 21:30:58 2011] Offset between fit and detection position for source 6 = 9.132070 pixels
[Wed Oct  5 21:30:58 2011] 1061.588000 total counts/ 366.232000 bgd. counts: snr = 36.335326
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 9.132070 pixels
  Position = (279.1, 301.0) = 12 19 7.38 47 16 44.0
  Extent = 27.3 (27.2-54.7)", rotation angle = 0
  Source counts = 695.4 +/- 32.6
  Background counts = 366.2
  Rate = 0.06 +/- 0.003
[Wed Oct  5 21:30:58 2011] Spatial fit model total counts = 1831.460000, observed total counts = 1828.000000
[Wed Oct  5 21:30:58 2011] Offset between fit and detection position for source 6 = 6.527204 pixels
[Wed Oct  5 21:30:58 2011] Warning, changing simple spatial fit ID from 5 to 6
[Wed Oct  5 21:30:58 2011] 2027.211000 total counts/ 478.651000 bgd. counts: snr = 70.781303
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 6.527204 pixels
  Position = (283.8, 305.6) = 12 19 5.39 47 17 3.9
  Extent = 28.7 (28.6-57.3)", rotation angle = 0
  Source counts = 1548.6 +/- 45.0
  Background counts = 478.7
  Rate = 0.1 +/- 0.004
[Wed Oct  5 21:30:58 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 21:30:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 21:30:58 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 21:30:58 2011] Source does appear to be extended
[Wed Oct  5 21:30:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 01:01:12 2011] Counts = 1548.560000, rescaling region sizes by 2.000000
[Thu Oct  6 01:01:12 2011] XMMSAS src. selection expression = ellipse(24640.114000, 26535.098000, 3439.728099, 3439.728099, 0.000000, X, Y)
[Thu Oct  6 01:01:12 2011] Writing source region out to fullrun_mos2_xmm0059140201_pi300-10000_pass1_cl_src6_src.reg
[Thu Oct  6 01:01:12 2011] Extracting stamp from image fullrun_mos2_xmm0059140201_pi300-10000_cl_sm2.00.img.gz, (86, 108) - (481, 503)
[Thu Oct  6 01:01:12 2011] XMMSAS bgd. selection expression = annulus(24640.114000, 26535.098000, 11465.760330, 22931.520660, X, Y) && !ellipse(26217.912640, 27953.548600, 411.593612, 411.593612, 0.000000, X, Y) && !ellipse(26137.756334, 25416.161600, 356.487210, 356.487210, 0.000000, X, Y) && !ellipse(26873.372600, 29010.982600, 699.012020, 699.012020, 0.000000, X, Y) && !ellipse(36180.144714, 25539.846649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25294.712000, 27167.262000, 1146.576033, 1146.576033, 0.000000, X, Y) && !ellipse(28674.084420, 35275.998400, 485.295363, 485.295363, 0.000000, X, Y) && !ellipse(28998.138800, 27101.897200, 334.349610, 334.349610, 0.000000, X, Y) && !ellipse(26703.994690, 26139.909821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27387.038000, 28927.164000, 1240.664036, 1240.664036, 0.000000, X, Y) && !ellipse(15081.093800, 31258.095000, 401.004812, 401.004812, 0.000000, X, Y) && !ellipse(20987.399338, 17615.501511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24216.168000, 28782.178000, 1204.928035, 1204.928035, 0.000000, X, Y) && !ellipse(26626.385529, 30568.331421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27815.257202, 26410.497131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24030.925200, 26501.108200, 1165.072034, 450.508813, 0.000000, X, Y) && !ellipse(19091.650923, 21217.600600, 402.729612, 402.729612, 0.000000, X, Y) && !ellipse(26430.169800, 31755.674200, 398.087211, 398.087211, 0.000000, X, Y) && !ellipse(28299.322144, 30492.588745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28009.438080, 28823.645294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26821.628600, 26260.609800, 261.202408, 261.202408, 0.000000, X, Y) && !ellipse(27980.386749, 28335.765076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27010.536407, 26911.774628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28597.173950, 27887.001404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30522.802000, 29807.458000, 2705.984078, 2705.984078, 0.000000, X, Y) && !ellipse(23812.051800, 12856.993160, 1369.664039, 1369.664039, 0.000000, X, Y)
[Thu Oct  6 01:01:12 2011] Writing fullrun_mos2_xmm0059140201_pi300-10000_pass1_cl_src6.gif
[Thu Oct  6 01:02:20 2011] Mean detx,y = (823.89, -166.18) 
[Thu Oct  6 01:02:21 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Oct  6 01:13:00 2011] Binned source spectrum to 10 counts/bin
[Thu Oct  6 01:13:00 2011] Setting source spectrum file to fullrun_mos2_xmm0059140201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Oct  6 01:13:00 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0059140201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Oct  6 03:23:45 2011] Updating aperture counts using extracted products
[Thu Oct  6 03:23:45 2011] Error reading totcts from fullrun_mos2_xmm0059140201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Oct  6 03:23:46 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 03:23:46 2011] Using photon index=1.80, rate=0.123, arf fullrun_mos2_xmm0059140201_pi300-10000_pass1_cl_src6.arf
[Thu Oct  6 03:23:46 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 03:23:46 2011] Updating source flux to 1.1e-12
[Thu Oct  6 03:27:11 2011] Flag c found in src. 6 procflags, skipping spectral fitting