[Wed Oct  5 13:56:14 2011] Detection parameters:
  Position = (310.0, 335.0) = 12 18 54.17 47 19 11.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 254.4 +/- 20.7
  Background counts = 12.3
  Rate = 0.02 +/- 0.002

[Wed Oct  5 13:56:15 2011] Off-axis axis estimate = 2.78'
[Wed Oct  5 16:13:29 2011] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 16:13:29 2011] Initial guess for spatial extent in simple fitting = 7.82"
[Wed Oct  5 16:13:29 2011] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.758
[Wed Oct  5 16:13:29 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.82"
[Wed Oct  5 17:23:13 2011] fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_src3.ximg exists
[Wed Oct  5 17:23:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_src3.csv
[Wed Oct  5 17:23:13 2011] fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Oct  5 17:23:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_src3.csv
[Wed Oct  5 17:23:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 17:23:13 2011] fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct  5 17:23:13 2011] fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct  5 17:23:13 2011] Fit fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct  5 17:23:32 2011] Spatial fit model total counts = 983.114000, observed total counts = 978.000000
[Wed Oct  5 17:23:32 2011] Offset between fit and detection position for source 4 = 0.577811 pixels
[Wed Oct  5 17:23:32 2011] 900.774000 total counts/ 736.948000 bgd. counts: snr = 6.034821
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.577811 pixels
  Position = (310.3, 335.4) = 12 18 54.04 47 19 13.9
  Extent = 9.9 (7.8-15.6)", rotation angle = 0
  Source counts = 163.8 +/- 30.0
  Background counts = 736.9
  Rate = 0.01 +/- 0.002
[Wed Oct  5 17:23:32 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 17:23:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 17:23:32 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 17:23:32 2011] Source does appear to be extended
[Wed Oct  5 17:23:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 17:23:32 2011] Source is confused with source 12
[Wed Oct  5 19:55:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 19:55:21 2011] Initial guess for spatial extent in simple fitting = 9.88"
[Wed Oct  5 19:55:21 2011] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.813
[Wed Oct  5 19:55:21 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 9.88"
[Wed Oct  5 21:30:32 2011] fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_src3.ximg exists
[Wed Oct  5 21:30:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_src3.csv
[Wed Oct  5 21:30:32 2011] fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Oct  5 21:30:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_src3.csv
[Wed Oct  5 21:30:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 21:30:32 2011] fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Oct  5 21:30:33 2011] fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Oct  5 21:30:33 2011] Fit fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Oct  5 21:30:58 2011] Spatial fit model total counts = 974.727000, observed total counts = 978.000000
[Wed Oct  5 21:30:58 2011] Offset between fit and detection position for source 4 = 1.669338 pixels
[Wed Oct  5 21:30:58 2011] 666.346000 total counts/ 532.655000 bgd. counts: snr = 5.792675
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.669338 pixels
  Position = (309.4, 334.0) = 12 18 54.41 47 19 7.7
  Extent = 8.7 (6.8-11.2)", rotation angle = 0
  Source counts = 133.7 +/- 25.8
  Background counts = 532.7
  Rate = 0.01 +/- 0.002
[Wed Oct  5 21:30:58 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 21:30:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 21:30:58 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 21:30:58 2011] Source does appear to be extended
[Wed Oct  5 21:30:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 01:01:12 2011] XMMSAS src. selection expression = ellipse(26873.372600, 29010.982600, 524.259015, 524.259015, 0.000000, X, Y)
[Thu Oct  6 01:01:12 2011] Writing source region out to fullrun_mos2_xmm0059140201_pi300-10000_pass1_cl_src4_src.reg
[Thu Oct  6 01:01:12 2011] Extracting stamp from image fullrun_mos2_xmm0059140201_pi300-10000_cl_sm2.00.img.gz, (279, 304) - (340, 364)
[Thu Oct  6 01:01:12 2011] XMMSAS bgd. selection expression = annulus(26873.372600, 29010.982600, 873.765025, 1747.530050, X, Y) && !ellipse(26217.912640, 27953.548600, 411.593612, 411.593612, 0.000000, X, Y) && !ellipse(24640.114000, 26535.098000, 2293.152066, 2293.152066, 0.000000, X, Y) && !ellipse(25294.712000, 27167.262000, 1146.576033, 1146.576033, 0.000000, X, Y) && !ellipse(27387.038000, 28927.164000, 1240.664036, 1240.664036, 0.000000, X, Y) && !ellipse(24216.168000, 28782.178000, 1204.928035, 1204.928035, 0.000000, X, Y) && !ellipse(26626.385529, 30568.331421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27815.257202, 26410.497131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24030.925200, 26501.108200, 1165.072034, 450.508813, 0.000000, X, Y) && !ellipse(28299.322144, 30492.588745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28009.438080, 28823.645294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27980.386749, 28335.765076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27010.536407, 26911.774628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28597.173950, 27887.001404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30522.802000, 29807.458000, 2705.984078, 2705.984078, 0.000000, X, Y)
[Thu Oct  6 01:01:12 2011] Writing fullrun_mos2_xmm0059140201_pi300-10000_pass1_cl_src4.gif
[Thu Oct  6 01:01:42 2011] Mean detx,y = (-1004.91, 747.49) 
[Thu Oct  6 01:01:43 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Oct  6 01:01:53 2011] Binned source spectrum to 10 counts/bin
[Thu Oct  6 01:01:54 2011] Setting source spectrum file to fullrun_mos2_xmm0059140201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Oct  6 01:01:54 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0059140201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Oct  6 03:23:45 2011] Updating aperture counts using extracted products
[Thu Oct  6 03:23:45 2011] Error reading totcts from fullrun_mos2_xmm0059140201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Oct  6 03:23:46 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 03:23:46 2011] Using photon index=1.80, rate=0.0106, arf fullrun_mos2_xmm0059140201_pi300-10000_pass1_cl_src4.arf
[Thu Oct  6 03:23:46 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 03:23:46 2011] Updating source flux to 1.1e-13
[Thu Oct  6 03:27:11 2011] Flag c found in src. 4 procflags, skipping spectral fitting