[Wed Oct  5 13:56:14 2011] Detection parameters:
  Position = (302.0, 322.1) = 12 18 57.61 47 18 15.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2739.5 +/- 61.9
  Background counts = 11.6
  Rate = 0.2 +/- 0.005

[Wed Oct  5 13:56:15 2011] Off-axis axis estimate = 1.73'
[Wed Oct  5 16:13:29 2011] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 16:13:29 2011] Initial guess for spatial extent in simple fitting = 7.30"
[Wed Oct  5 16:13:29 2011] source mask rpix=1.7, npix_max = 18, mask sum = 13, frac = 0.686
[Wed Oct  5 16:13:29 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Wed Oct  5 17:23:13 2011] fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Oct  5 17:23:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_src1.csv
[Wed Oct  5 17:23:13 2011] fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Oct  5 17:23:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_src1.csv
[Wed Oct  5 17:23:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 17:23:13 2011] fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct  5 17:23:13 2011] fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct  5 17:23:13 2011] Fit fullrun_mos2_xmm0059140201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct  5 17:23:32 2011] Spatial fit model total counts = 3256.880000, observed total counts = 3251.000000
[Wed Oct  5 17:23:32 2011] Offset between fit and detection position for source 3 = 0.239488 pixels
[Wed Oct  5 17:23:32 2011] 3230.400000 total counts/ 1490.100000 bgd. counts: snr = 45.083374
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.239488 pixels
  Position = (301.9, 321.9) = 12 18 57.63 47 18 14.8
  Extent = 5.1 (5.0-5.3)", rotation angle = 0
  Source counts = 1740.3 +/- 56.8
  Background counts = 1490.1
  Rate = 0.1 +/- 0.005
[Wed Oct  5 17:23:32 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 17:23:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 17:23:32 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 17:23:32 2011] Source does appear to be extended
[Wed Oct  5 17:23:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 19:55:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 19:55:21 2011] Initial guess for spatial extent in simple fitting = 5.15"
[Wed Oct  5 19:55:21 2011] source mask rpix=1.2, npix_max = 11, mask sum = 13, frac = 1.147
[Wed Oct  5 19:55:21 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.15"
[Wed Oct  5 21:30:32 2011] fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Oct  5 21:30:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_src1.csv
[Wed Oct  5 21:30:32 2011] fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Oct  5 21:30:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_src1.csv
[Wed Oct  5 21:30:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 21:30:32 2011] fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct  5 21:30:32 2011] fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct  5 21:30:32 2011] Fit fullrun_mos2_xmm0059140201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct  5 21:30:58 2011] Spatial fit model total counts = 3259.390000, observed total counts = 3251.000000
[Wed Oct  5 21:30:58 2011] Offset between fit and detection position for source 3 = 0.001908 pixels
[Wed Oct  5 21:30:58 2011] 3233.010000 total counts/ 1486.510000 bgd. counts: snr = 45.298589
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.001908 pixels
  Position = (301.9, 321.9) = 12 18 57.63 47 18 14.8
  Extent = 5.1 (5.0-5.4)", rotation angle = 0
  Source counts = 1746.5 +/- 56.9
  Background counts = 1486.5
  Rate = 0.1 +/- 0.005
[Wed Oct  5 21:30:58 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 21:30:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 21:30:58 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 21:30:58 2011] Source does appear to be extended
[Wed Oct  5 21:30:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 01:01:12 2011] Counts = 1746.500000, rescaling region sizes by 2.000000
[Thu Oct  6 01:01:12 2011] XMMSAS src. selection expression = ellipse(26217.912640, 27953.548600, 617.390418, 617.390418, 0.000000, X, Y)
[Thu Oct  6 01:01:12 2011] Writing source region out to fullrun_mos2_xmm0059140201_pi300-10000_pass1_cl_src3_src.reg
[Thu Oct  6 01:01:12 2011] Extracting stamp from image fullrun_mos2_xmm0059140201_pi300-10000_cl_sm2.00.img.gz, (266, 286) - (337, 357)
[Thu Oct  6 01:01:12 2011] XMMSAS bgd. selection expression = annulus(26217.912640, 27953.548600, 2057.968059, 4115.936118, X, Y) && !ellipse(26137.756334, 25416.161600, 356.487210, 356.487210, 0.000000, X, Y) && !ellipse(26873.372600, 29010.982600, 699.012020, 699.012020, 0.000000, X, Y) && !ellipse(24640.114000, 26535.098000, 2293.152066, 2293.152066, 0.000000, X, Y) && !ellipse(25294.712000, 27167.262000, 1146.576033, 1146.576033, 0.000000, X, Y) && !ellipse(28998.138800, 27101.897200, 334.349610, 334.349610, 0.000000, X, Y) && !ellipse(26703.994690, 26139.909821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27387.038000, 28927.164000, 1240.664036, 1240.664036, 0.000000, X, Y) && !ellipse(24216.168000, 28782.178000, 1204.928035, 1204.928035, 0.000000, X, Y) && !ellipse(26626.385529, 30568.331421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27815.257202, 26410.497131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24030.925200, 26501.108200, 1165.072034, 450.508813, 0.000000, X, Y) && !ellipse(26430.169800, 31755.674200, 398.087211, 398.087211, 0.000000, X, Y) && !ellipse(28299.322144, 30492.588745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28009.438080, 28823.645294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26821.628600, 26260.609800, 261.202408, 261.202408, 0.000000, X, Y) && !ellipse(27980.386749, 28335.765076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27010.536407, 26911.774628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28597.173950, 27887.001404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30522.802000, 29807.458000, 2705.984078, 2705.984078, 0.000000, X, Y)
[Thu Oct  6 01:01:12 2011] Writing fullrun_mos2_xmm0059140201_pi300-10000_pass1_cl_src3.gif
[Thu Oct  6 01:01:14 2011] Mean detx,y = (72.95, 105.10) 
[Thu Oct  6 01:01:15 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Oct  6 01:01:29 2011] Binned source spectrum to 10 counts/bin
[Thu Oct  6 01:01:29 2011] Setting source spectrum file to fullrun_mos2_xmm0059140201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Oct  6 01:01:29 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0059140201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Oct  6 03:23:45 2011] Updating aperture counts using extracted products
[Thu Oct  6 03:23:45 2011] Error reading totcts from fullrun_mos2_xmm0059140201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Oct  6 03:23:46 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 03:23:46 2011] Using photon index=1.80, rate=0.139, arf fullrun_mos2_xmm0059140201_pi300-10000_pass1_cl_src3.arf
[Thu Oct  6 03:23:46 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 03:23:46 2011] Updating source flux to 1.6e-12
[Thu Oct  6 03:30:16 2011] Reading fit data from xmm0059140201/analysis//spectral/fullrun_mos2_xmm0059140201_pi300-10000_pass1_cl_src3_pl.csv
[Thu Oct  6 03:30:16 2011] Spectral fit parameter nH value = 7.38784e+14
[Thu Oct  6 03:30:16 2011] Spectral fit parameter PhoIndex value = -0.104759
[Thu Oct  6 03:30:16 2011] Failed to get F(0.3-8.0) from xmm0059140201/analysis//spectral/fullrun_mos2_xmm0059140201_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Thu Oct  6 03:30:16 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 03:30:16 2011] Using Nh = 7.4e+14, photon index=-0.10, rate=0.139, arf fullrun_mos2_xmm0059140201_pi300-10000_pass1_cl_src3.arf
[Thu Oct  6 03:30:16 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 03:30:16 2011] Updating source flux to 4.1e-12