[Wed Oct  5 13:55:56 2011] Detection parameters:
  Position = (302.1, 321.9) = 12 18 57.57 47 18 15.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2966.5 +/- 65.8
  Background counts = 12.1
  Rate = 0.2 +/- 0.005

[Wed Oct  5 13:55:57 2011] Off-axis axis estimate = 1.72'
[Wed Oct  5 15:15:33 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 15:15:33 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Oct  5 15:15:33 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Wed Oct  5 15:15:33 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Wed Oct  5 16:13:28 2011] fullrun_mos1_xmm0059140201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Oct  5 16:13:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0059140201_pi300-10000_cl_pass0_src1.csv
[Wed Oct  5 16:13:28 2011] fullrun_mos1_xmm0059140201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Oct  5 16:13:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0059140201_pi300-10000_cl_pass0_src1.csv
[Wed Oct  5 16:13:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0059140201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0059140201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 16:13:29 2011] fullrun_mos1_xmm0059140201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct  5 16:13:29 2011] fullrun_mos1_xmm0059140201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct  5 16:13:29 2011] Fit fullrun_mos1_xmm0059140201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct  5 17:23:26 2011] Spatial fit model total counts = 3541.480000, observed total counts = 3544.000000
[Wed Oct  5 17:23:26 2011] Offset between fit and detection position for source 1 = 0.244124 pixels
[Wed Oct  5 17:23:26 2011] 3542.570000 total counts/ 1714.300000 bgd. counts: snr = 44.156732
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.244124 pixels
  Position = (301.8, 321.8) = 12 18 57.67 47 18 14.6
  Extent = 5.4 (5.2-5.7)", rotation angle = 0
  Source counts = 1828.3 +/- 59.5
  Background counts = 1714.3
  Rate = 0.1 +/- 0.005
[Wed Oct  5 17:23:26 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 17:23:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 17:23:26 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 17:23:26 2011] Source does appear to be extended
[Wed Oct  5 17:23:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 17:23:26 2011] Source is confused with source 2
[Wed Oct  5 19:05:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 19:05:53 2011] Initial guess for spatial extent in simple fitting = 5.39"
[Wed Oct  5 19:05:53 2011] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.321
[Wed Oct  5 19:05:53 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.39"
[Wed Oct  5 19:55:21 2011] fullrun_mos1_xmm0059140201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Oct  5 19:55:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0059140201_pi300-10000_cl_pass1_src1.csv
[Wed Oct  5 19:55:21 2011] fullrun_mos1_xmm0059140201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Oct  5 19:55:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0059140201_pi300-10000_cl_pass1_src1.csv
[Wed Oct  5 19:55:21 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0059140201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0059140201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 19:55:21 2011] fullrun_mos1_xmm0059140201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct  5 19:55:21 2011] fullrun_mos1_xmm0059140201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct  5 19:55:21 2011] Fit fullrun_mos1_xmm0059140201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct  5 21:30:50 2011] Spatial fit model total counts = 3526.940000, observed total counts = 3526.000000
[Wed Oct  5 21:30:50 2011] Offset between fit and detection position for source 1 = 0.008389 pixels
[Wed Oct  5 21:30:50 2011] 3541.380000 total counts/ 1715.340000 bgd. counts: snr = 44.089501
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.008389 pixels
  Position = (301.8, 321.8) = 12 18 57.67 47 18 14.5
  Extent = 5.4 (5.2-5.7)", rotation angle = 0
  Source counts = 1826.0 +/- 59.5
  Background counts = 1715.3
  Rate = 0.1 +/- 0.005
[Wed Oct  5 21:30:50 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 21:30:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 21:30:50 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 21:30:50 2011] Source does appear to be extended
[Wed Oct  5 21:30:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 23:47:11 2011] Counts = 1826.040000, rescaling region sizes by 2.000000
[Wed Oct  5 23:47:11 2011] XMMSAS src. selection expression = ellipse(26209.717400, 27948.280420, 647.024419, 647.024419, 0.000000, X, Y)
[Wed Oct  5 23:47:11 2011] Writing source region out to fullrun_mos1_xmm0059140201_pi300-10000_pass1_cl_src1_src.reg
[Wed Oct  5 23:47:11 2011] Extracting stamp from image fullrun_mos1_xmm0059140201_pi300-10000_cl_sm2.00.img.gz, (265, 285) - (339, 359)
[Wed Oct  5 23:47:11 2011] XMMSAS bgd. selection expression = annulus(26209.717400, 27948.280420, 2156.748062, 4313.496124, X, Y) && !ellipse(26455.292000, 28393.230000, 1218.864035, 1218.864035, 0.000000, X, Y) && !ellipse(25289.333600, 26717.308200, 880.648025, 880.648025, 0.000000, X, Y) && !ellipse(26148.157200, 25406.651400, 357.733610, 316.456009, 90.000000, X, Y) && !ellipse(24495.679581, 26482.922864, 1089.232031, 577.343236, 0.000000, X, Y) && !ellipse(24595.424000, 28412.044000, 1201.512035, 1201.512035, 0.000000, X, Y) && !ellipse(28652.924860, 28332.278600, 544.346416, 544.346416, 0.000000, X, Y) && !ellipse(24940.516000, 26397.006000, 1761.296051, 1761.296051, 0.000000, X, Y) && !ellipse(26465.825290, 31753.027178, 404.714655, 242.504300, 356.907055, X, Y) && !ellipse(26611.068665, 30559.856567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28335.254000, 30541.566000, 786.310423, 786.310423, 0.000000, X, Y) && !ellipse(27831.309200, 26257.386200, 521.381555, 521.381555, 0.000000, X, Y) && !ellipse(25607.030000, 30035.368000, 1263.496036, 1263.496036, 0.000000, X, Y) && !ellipse(28578.308800, 28410.720000, 1248.984036, 1248.984036, 0.000000, X, Y) && !ellipse(24146.407623, 27812.835815, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Oct  5 23:47:11 2011] Writing fullrun_mos1_xmm0059140201_pi300-10000_pass1_cl_src1.gif
[Wed Oct  5 23:47:13 2011] Mean detx,y = (319.50, -250.86) 
[Wed Oct  5 23:47:14 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 23:47:28 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 23:47:29 2011] Setting source spectrum file to fullrun_mos1_xmm0059140201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Oct  5 23:47:29 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0059140201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Oct  6 03:23:42 2011] Updating aperture counts using extracted products
[Thu Oct  6 03:23:42 2011] Error reading totcts from fullrun_mos1_xmm0059140201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Oct  6 03:23:43 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 03:23:43 2011] Using photon index=1.80, rate=0.145, arf fullrun_mos1_xmm0059140201_pi300-10000_pass1_cl_src1.arf
[Thu Oct  6 03:23:43 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 03:23:43 2011] Updating source flux to 1.4e-12
[Thu Oct  6 03:23:49 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Thu Oct  6 03:27:11 2011] Reading fit data from xmm0059140201/analysis//spectral/fullrun_mos1_xmm0059140201_pi300-10000_pass1_cl_src1_pl.csv
[Thu Oct  6 03:27:11 2011] Spectral fit parameter nH value = 8.22496e+14
[Thu Oct  6 03:27:11 2011] Spectral fit parameter PhoIndex value = -0.0630004
[Thu Oct  6 03:27:11 2011] Failed to get F(0.3-8.0) from xmm0059140201/analysis//spectral/fullrun_mos1_xmm0059140201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Oct  6 03:27:11 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 03:27:11 2011] Using Nh = 8.2e+14, photon index=-0.06, rate=0.145, arf fullrun_mos1_xmm0059140201_pi300-10000_pass1_cl_src1.arf
[Thu Oct  6 03:27:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 03:27:11 2011] Updating source flux to 3.8e-12