[Wed Oct  5 10:11:48 2011] Detection parameters:
  Position = (279.0, 307.1) = 12 19 2.14 47 17 13.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 668.8 +/- 32.6
  Background counts = 23.3
  Rate = 0.08 +/- 0.004

[Wed Oct  5 10:11:49 2011] Off-axis axis estimate = 1.55'
[Wed Oct  5 10:14:16 2011] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 10:14:16 2011] Initial guess for spatial extent in simple fitting = 7.20"
[Wed Oct  5 10:14:16 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.861
[Wed Oct  5 10:14:16 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 7.20"
[Wed Oct  5 12:12:05 2011] fullrun_pn_xmm0059140101_pi300-10000_cl_pass0_src5.ximg exists
[Wed Oct  5 12:12:05 2011] fullrun_pn_xmm0059140101_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Oct  5 12:12:05 2011] Fit fullrun_pn_xmm0059140101_pi300-10000_cl_pass0_src5 appears to have run properly
[Wed Oct  5 12:12:06 2011] fullrun_pn_xmm0059140101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Oct  5 12:12:06 2011] fullrun_pn_xmm0059140101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Oct  5 12:12:06 2011] Fit fullrun_pn_xmm0059140101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Oct  5 15:31:34 2011] Spatial fit model total counts = 1843.530000, observed total counts = 1858.000000
[Wed Oct  5 15:31:34 2011] Offset between fit and detection position for source 5 = 3.055384 pixels
[Wed Oct  5 15:31:34 2011] 1995.674000 total counts/ 868.484000 bgd. counts: snr = 38.248659
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 3.055384 pixels
  Position = (276.0, 306.3) = 12 19 3.39 47 17 9.8
  Extent = 21.4" x 12.1", rotation angle = 339
  Source counts = 1127.2 +/- 44.7
  Background counts = 868.5
  Rate = 0.1 +/- 0.005
[Wed Oct  5 15:31:34 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 15:31:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 15:31:34 2011] Assessing source extent using major
[Wed Oct  5 15:31:34 2011] Source does appear to be extended
[Wed Oct  5 15:31:34 2011] Computing asymmetry using major and minor axis, asym = 1.77
[Wed Oct  5 15:31:34 2011] Source is asymmetric
[Wed Oct  5 15:31:34 2011] Source is confused with source 16
[Wed Oct  5 15:31:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 15:31:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 15:31:59 2011] Initial guess for spatial extent in simple fitting = 16.73"
[Wed Oct  5 15:31:59 2011] source mask rpix=3.8, npix_max = 75, mask sum = 63, frac = 0.834
[Wed Oct  5 15:31:59 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 16.73"
[Wed Oct  5 17:05:59 2011] fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_src5.ximg exists
[Wed Oct  5 17:05:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_src5.csv
[Wed Oct  5 17:05:59 2011] fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Oct  5 17:05:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_src5.csv
[Wed Oct  5 17:05:59 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 17:06:00 2011] fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Oct  5 17:06:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed Oct  5 17:06:00 2011] fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Oct  5 17:06:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed Oct  5 17:06:00 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 19:24:25 2011] Warning, spatial fit 5 centroid is now closest to src. 36
[Wed Oct  5 19:24:25 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 19:24:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 19:24:25 2011] Assessing source extent using major
[Wed Oct  5 19:24:25 2011] Source does appear to be extended
[Wed Oct  5 19:24:25 2011] Computing asymmetry using major and minor axis, asym = 1.77
[Wed Oct  5 19:24:25 2011] Source is asymmetric
[Wed Oct  5 19:24:47 2011] Counts = 1127.190000, rescaling region sizes by 2.000000
[Wed Oct  5 19:24:47 2011] XMMSAS src. selection expression = ellipse(23965.510400, 26597.007000, 2564.508074, 1450.956042, 338.685823, X, Y)
[Wed Oct  5 19:24:47 2011] Writing source region out to fullrun_pn_xmm0059140101_pi300-10000_pass1_cl_src5_src.reg
[Wed Oct  5 19:24:47 2011] Extracting stamp from image fullrun_pn_xmm0059140101_pi300-10000_cl_sm2.00.img.gz, (129, 159) - (423, 454)
[Wed Oct  5 19:24:47 2011] XMMSAS bgd. selection expression = annulus(23965.510400, 26597.007000, 8548.360246, 17096.720492, X, Y) && !ellipse(35121.044600, 25464.828800, 471.686414, 471.686414, 0.000000, X, Y) && !ellipse(25135.451000, 27882.559000, 547.809616, 485.916014, 296.853000, X, Y) && !ellipse(25304.132000, 28351.614000, 1212.592035, 1212.592035, 0.000000, X, Y) && !ellipse(23730.277200, 28256.310600, 1000.344029, 1000.344029, 0.000000, X, Y) && !ellipse(25100.046200, 25397.367600, 353.430410, 353.430410, 0.000000, X, Y) && !ellipse(19861.786400, 17640.216400, 844.552024, 844.552024, 0.000000, X, Y) && !ellipse(13990.706400, 31165.123000, 431.951212, 431.951212, 0.000000, X, Y) && !ellipse(27936.422200, 27016.974400, 390.326411, 390.326411, 0.000000, X, Y) && !ellipse(25681.677600, 26184.945000, 505.805615, 505.805615, 0.000000, X, Y) && !ellipse(27580.942000, 35205.965200, 510.508815, 510.508815, 0.000000, X, Y) && !ellipse(25593.648163, 30506.888733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27108.350342, 28487.839844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27696.954000, 28237.012000, 757.592022, 757.592022, 0.000000, X, Y) && !ellipse(22692.950140, 12668.024400, 1048.544030, 1048.544030, 0.000000, X, Y) && !ellipse(23189.655800, 27203.635600, 786.183223, 786.183223, 0.000000, X, Y) && !ellipse(13460.458984, 36466.970184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23029.742126, 37482.675537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26768.957400, 26145.891200, 285.623208, 285.623208, 0.000000, X, Y) && !ellipse(33452.983582, 38631.546539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26991.343240, 36629.429600, 407.197612, 407.197612, 0.000000, X, Y) && !ellipse(21788.885502, 34750.048800, 548.156016, 548.156016, 0.000000, X, Y) && !ellipse(27470.897200, 33872.094600, 467.878413, 467.878413, 0.000000, X, Y) && !ellipse(27473.801849, 29641.927979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25051.305328, 29728.885498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24194.654000, 29695.340000, 550.661616, 550.661616, 0.000000, X, Y) && !ellipse(24700.674000, 29360.308000, 1283.752037, 1283.752037, 0.000000, X, Y) && !ellipse(23691.330292, 29183.823914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28018.792800, 29201.082400, 464.490413, 464.490413, 0.000000, X, Y) && !ellipse(27493.530000, 28304.914000, 1217.600035, 1217.600035, 0.000000, X, Y) && !ellipse(18145.280500, 27544.719200, 508.753615, 508.753615, 0.000000, X, Y) && !ellipse(27003.420929, 27159.149017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23640.336600, 25262.220200, 465.988013, 465.988013, 0.000000, X, Y) && !ellipse(28023.365000, 22119.981400, 399.267211, 399.267211, 0.000000, X, Y) && !ellipse(18054.244600, 21150.216200, 707.029620, 270.037608, 29.497675, X, Y) && !ellipse(28785.959808, 13740.199509, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Oct  5 19:24:47 2011] Writing fullrun_pn_xmm0059140101_pi300-10000_pass1_cl_src5.gif
[Wed Oct  5 19:31:32 2011] Mean detx,y = (-1087.19, -268.47) 
[Wed Oct  5 19:31:35 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 19:39:35 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 19:39:35 2011] Setting source spectrum file to fullrun_pn_xmm0059140101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Oct  5 19:39:35 2011] Setting bgd. spectrum file to fullrun_pn_xmm0059140101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Oct  6 02:08:35 2011] Updating aperture counts using extracted products
[Thu Oct  6 02:08:35 2011] Error reading totcts from fullrun_pn_xmm0059140101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Oct  6 02:08:38 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 02:08:38 2011] Using photon index=1.80, rate=0.132, arf fullrun_pn_xmm0059140101_pi300-10000_pass1_cl_src5.arf
[Thu Oct  6 02:08:38 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 02:08:38 2011] Updating source flux to 3.9e-13
[Thu Oct  6 02:21:19 2011] Flag c found in src. 5 procflags, skipping spectral fitting