[Wed Oct  5 10:11:48 2011] Detection parameters:
  Position = (317.1, 320.2) = 12 18 45.81 47 18 7.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.2 +/- 15.4
  Background counts = 23.0
  Rate = 0.01 +/- 0.002

[Wed Oct  5 10:11:49 2011] Off-axis axis estimate = 2.08'
[Wed Oct  5 10:14:16 2011] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 10:14:16 2011] Initial guess for spatial extent in simple fitting = 7.47"
[Wed Oct  5 10:14:16 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.814
[Wed Oct  5 10:14:16 2011] Giving source the simple spatial ID 34 for pass 0, mean size = 7.47"
[Wed Oct  5 12:12:06 2011] fullrun_pn_xmm0059140101_pi300-10000_cl_pass0_src34.ximg exists
[Wed Oct  5 12:12:06 2011] fullrun_pn_xmm0059140101_pi300-10000_cl_pass0_src34_1.ximg exists
[Wed Oct  5 12:12:06 2011] Fit fullrun_pn_xmm0059140101_pi300-10000_cl_pass0_src34 appears to have run properly
[Wed Oct  5 12:12:06 2011] fullrun_pn_xmm0059140101_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Wed Oct  5 12:12:06 2011] fullrun_pn_xmm0059140101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Wed Oct  5 12:12:06 2011] Fit fullrun_pn_xmm0059140101_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Wed Oct  5 15:31:34 2011] Spatial fit model total counts = 816.227000, observed total counts = 816.000000
[Wed Oct  5 15:31:34 2011] Offset between fit and detection position for source 34 = 5.650092 pixels
[Wed Oct  5 15:31:34 2011] 765.083000 total counts/ 477.541000 bgd. counts: snr = 13.158184
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 5.650092 pixels
  Position = (317.5, 325.8) = 12 18 45.66 47 18 34.9
  Extent = 14.9 (14.9-29.9)", rotation angle = 0
  Source counts = 287.5 +/- 27.7
  Background counts = 477.5
  Rate = 0.03 +/- 0.003
[Wed Oct  5 15:31:34 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 15:31:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 15:31:34 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 15:31:34 2011] Source does appear to be extended
[Wed Oct  5 15:31:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 15:31:34 2011] Source is confused with source 13
[Wed Oct  5 15:31:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 15:31:59 2011] Initial guess for spatial extent in simple fitting = 14.94"
[Wed Oct  5 15:31:59 2011] source mask rpix=3.4, npix_max = 61, mask sum = 56, frac = 0.905
[Wed Oct  5 15:31:59 2011] Giving source the simple spatial ID 31 for pass 1, mean size = 14.94"
[Wed Oct  5 17:06:00 2011] fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_src31.ximg exists
[Wed Oct  5 17:06:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_src31.csv
[Wed Oct  5 17:06:00 2011] fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_src31_1.ximg exists
[Wed Oct  5 17:06:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_src31.csv
[Wed Oct  5 17:06:00 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 17:06:01 2011] fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Wed Oct  5 17:06:01 2011] fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Wed Oct  5 17:06:01 2011] Fit fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Wed Oct  5 19:24:25 2011] Spatial fit model total counts = 1082.320000, observed total counts = 1082.000000
[Wed Oct  5 19:24:25 2011] Offset between fit and detection position for source 34 = 0.911347 pixels
[Wed Oct  5 19:24:25 2011] Warning, changing simple spatial fit ID from 31 to 12
[Wed Oct  5 19:24:25 2011] 1028.484000 total counts/ 670.042000 bgd. counts: snr = 13.847389
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.911347 pixels
  Position = (316.6, 325.9) = 12 18 46.05 47 18 35.2
  Extent = 15.2 (15.2-30.4)", rotation angle = 0
  Source counts = 358.4 +/- 32.1
  Background counts = 670.0
  Rate = 0.04 +/- 0.004
[Wed Oct  5 19:24:25 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 19:24:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 19:24:25 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 19:24:25 2011] Source does appear to be extended
[Wed Oct  5 19:24:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 19:24:47 2011] XMMSAS src. selection expression = ellipse(27493.530000, 28304.914000, 913.200026, 913.200026, 0.000000, X, Y)
[Wed Oct  5 19:24:47 2011] Writing source region out to fullrun_pn_xmm0059140101_pi300-10000_pass1_cl_src34_src.reg
[Wed Oct  5 19:24:47 2011] Extracting stamp from image fullrun_pn_xmm0059140101_pi300-10000_cl_sm2.00.img.gz, (264, 273) - (369, 378)
[Wed Oct  5 19:24:47 2011] XMMSAS bgd. selection expression = annulus(27493.530000, 28304.914000, 1522.000044, 3044.000088, X, Y) && !ellipse(25135.451000, 27882.559000, 547.809616, 485.916014, 296.853000, X, Y) && !ellipse(25304.132000, 28351.614000, 1212.592035, 1212.592035, 0.000000, X, Y) && !ellipse(23730.277200, 28256.310600, 1000.344029, 1000.344029, 0.000000, X, Y) && !ellipse(23965.510400, 26597.007000, 1709.672049, 967.304028, 338.685823, X, Y) && !ellipse(25100.046200, 25397.367600, 353.430410, 353.430410, 0.000000, X, Y) && !ellipse(27936.422200, 27016.974400, 390.326411, 390.326411, 0.000000, X, Y) && !ellipse(25681.677600, 26184.945000, 505.805615, 505.805615, 0.000000, X, Y) && !ellipse(25593.648163, 30506.888733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27108.350342, 28487.839844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27696.954000, 28237.012000, 757.592022, 757.592022, 0.000000, X, Y) && !ellipse(26768.957400, 26145.891200, 285.623208, 285.623208, 0.000000, X, Y) && !ellipse(27473.801849, 29641.927979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25051.305328, 29728.885498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24194.654000, 29695.340000, 550.661616, 550.661616, 0.000000, X, Y) && !ellipse(24700.674000, 29360.308000, 1283.752037, 1283.752037, 0.000000, X, Y) && !ellipse(23691.330292, 29183.823914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28018.792800, 29201.082400, 464.490413, 464.490413, 0.000000, X, Y) && !ellipse(27003.420929, 27159.149017, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Oct  5 19:24:47 2011] Writing fullrun_pn_xmm0059140101_pi300-10000_pass1_cl_src34.gif
[Wed Oct  5 19:50:07 2011] Mean detx,y = (1797.66, 1269.23) 
[Wed Oct  5 19:50:09 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 19:50:36 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 19:50:36 2011] Setting source spectrum file to fullrun_pn_xmm0059140101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Wed Oct  5 19:50:36 2011] Setting bgd. spectrum file to fullrun_pn_xmm0059140101_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Thu Oct  6 02:08:37 2011] Updating aperture counts using extracted products
[Thu Oct  6 02:08:38 2011] Error reading totcts from fullrun_pn_xmm0059140101_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Thu Oct  6 02:08:40 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 02:08:40 2011] Using photon index=1.80, rate=0.042, arf fullrun_pn_xmm0059140101_pi300-10000_pass1_cl_src34.arf
[Thu Oct  6 02:08:40 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 02:08:40 2011] Updating source flux to 1e-13
[Thu Oct  6 02:21:19 2011] Flag c found in src. 34 procflags, skipping spectral fitting