[Wed Oct  5 10:11:48 2011] Detection parameters:
  Position = (295.0, 330.0) = 12 18 55.28 47 18 54.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 798.9 +/- 37.2
  Background counts = 26.4
  Rate = 0.09 +/- 0.004

[Wed Oct  5 10:11:49 2011] Off-axis axis estimate = 2.30'
[Wed Oct  5 10:14:16 2011] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 10:14:16 2011] Initial guess for spatial extent in simple fitting = 7.58"
[Wed Oct  5 10:14:16 2011] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.796
[Wed Oct  5 10:14:16 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.58"
[Wed Oct  5 12:12:05 2011] fullrun_pn_xmm0059140101_pi300-10000_cl_pass0_src3.ximg exists
[Wed Oct  5 12:12:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059140101_pi300-10000_cl_pass0_src3.csv
[Wed Oct  5 12:12:05 2011] fullrun_pn_xmm0059140101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Oct  5 12:12:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059140101_pi300-10000_cl_pass0_src3.csv
[Wed Oct  5 12:12:05 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059140101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059140101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 12:12:06 2011] fullrun_pn_xmm0059140101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct  5 12:12:06 2011] fullrun_pn_xmm0059140101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct  5 12:12:06 2011] Fit fullrun_pn_xmm0059140101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct  5 15:31:34 2011] Spatial fit model total counts = 3427.470000, observed total counts = 3431.000000
[Wed Oct  5 15:31:34 2011] Offset between fit and detection position for source 3 = 5.042080 pixels
[Wed Oct  5 15:31:34 2011] 3008.880000 total counts/ 1357.730000 bgd. counts: snr = 44.810503
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 5.042080 pixels
  Position = (291.4, 326.4) = 12 18 56.82 47 18 37.5
  Extent = 15.2 (15.1-30.3)", rotation angle = 0
  Source counts = 1651.2 +/- 54.9
  Background counts = 1357.7
  Rate = 0.2 +/- 0.006
[Wed Oct  5 15:31:34 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 15:31:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 15:31:34 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 15:31:34 2011] Source does appear to be extended
[Wed Oct  5 15:31:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 15:31:34 2011] Source is confused with source 2
[Wed Oct  5 15:31:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 15:31:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 15:31:59 2011] Initial guess for spatial extent in simple fitting = 15.16"
[Wed Oct  5 15:31:59 2011] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.008
[Wed Oct  5 15:31:59 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 15.16"
[Wed Oct  5 17:05:59 2011] fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_src3.ximg exists
[Wed Oct  5 17:05:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_src3.csv
[Wed Oct  5 17:05:59 2011] fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Oct  5 17:05:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_src3.csv
[Wed Oct  5 17:05:59 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 17:06:00 2011] fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Oct  5 17:06:00 2011] fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Oct  5 17:06:00 2011] Fit fullrun_pn_xmm0059140101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Oct  5 19:24:25 2011] Warning, spatial fit 3 centroid is now closest to src. 28
[Wed Oct  5 19:24:25 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 19:24:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 19:24:25 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 19:24:25 2011] Source does appear to be extended
[Wed Oct  5 19:24:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 19:24:47 2011] Counts = 1651.150000, rescaling region sizes by 2.000000
[Wed Oct  5 19:24:47 2011] XMMSAS src. selection expression = ellipse(25304.132000, 28351.614000, 1818.888052, 1818.888052, 0.000000, X, Y)
[Wed Oct  5 19:24:47 2011] Writing source region out to fullrun_pn_xmm0059140101_pi300-10000_pass1_cl_src3_src.reg
[Wed Oct  5 19:24:47 2011] Extracting stamp from image fullrun_pn_xmm0059140101_pi300-10000_cl_sm2.00.img.gz, (187, 222) - (396, 431)
[Wed Oct  5 19:24:47 2011] XMMSAS bgd. selection expression = annulus(25304.132000, 28351.614000, 6062.960174, 12125.920349, X, Y) && !ellipse(35121.044600, 25464.828800, 471.686414, 471.686414, 0.000000, X, Y) && !ellipse(25135.451000, 27882.559000, 547.809616, 485.916014, 296.853000, X, Y) && !ellipse(23730.277200, 28256.310600, 1000.344029, 1000.344029, 0.000000, X, Y) && !ellipse(23965.510400, 26597.007000, 1709.672049, 967.304028, 338.685823, X, Y) && !ellipse(25100.046200, 25397.367600, 353.430410, 353.430410, 0.000000, X, Y) && !ellipse(19861.786400, 17640.216400, 844.552024, 844.552024, 0.000000, X, Y) && !ellipse(13990.706400, 31165.123000, 431.951212, 431.951212, 0.000000, X, Y) && !ellipse(27936.422200, 27016.974400, 390.326411, 390.326411, 0.000000, X, Y) && !ellipse(25681.677600, 26184.945000, 505.805615, 505.805615, 0.000000, X, Y) && !ellipse(27580.942000, 35205.965200, 510.508815, 510.508815, 0.000000, X, Y) && !ellipse(25593.648163, 30506.888733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27108.350342, 28487.839844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27696.954000, 28237.012000, 757.592022, 757.592022, 0.000000, X, Y) && !ellipse(23189.655800, 27203.635600, 786.183223, 786.183223, 0.000000, X, Y) && !ellipse(13460.458984, 36466.970184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23029.742126, 37482.675537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26768.957400, 26145.891200, 285.623208, 285.623208, 0.000000, X, Y) && !ellipse(33452.983582, 38631.546539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26991.343240, 36629.429600, 407.197612, 407.197612, 0.000000, X, Y) && !ellipse(21788.885502, 34750.048800, 548.156016, 548.156016, 0.000000, X, Y) && !ellipse(27470.897200, 33872.094600, 467.878413, 467.878413, 0.000000, X, Y) && !ellipse(27473.801849, 29641.927979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25051.305328, 29728.885498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24194.654000, 29695.340000, 550.661616, 550.661616, 0.000000, X, Y) && !ellipse(24700.674000, 29360.308000, 1283.752037, 1283.752037, 0.000000, X, Y) && !ellipse(23691.330292, 29183.823914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28018.792800, 29201.082400, 464.490413, 464.490413, 0.000000, X, Y) && !ellipse(27493.530000, 28304.914000, 1217.600035, 1217.600035, 0.000000, X, Y) && !ellipse(18145.280500, 27544.719200, 508.753615, 508.753615, 0.000000, X, Y) && !ellipse(27003.420929, 27159.149017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23640.336600, 25262.220200, 465.988013, 465.988013, 0.000000, X, Y) && !ellipse(28023.365000, 22119.981400, 399.267211, 399.267211, 0.000000, X, Y) && !ellipse(18054.244600, 21150.216200, 707.029620, 270.037608, 29.497675, X, Y)
[Wed Oct  5 19:24:47 2011] Writing fullrun_pn_xmm0059140101_pi300-10000_pass1_cl_src3.gif
[Wed Oct  5 19:26:23 2011] Mean detx,y = (292.70, -357.90) 
[Wed Oct  5 19:26:27 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 19:30:49 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 19:30:49 2011] Setting source spectrum file to fullrun_pn_xmm0059140101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Oct  5 19:30:49 2011] Setting bgd. spectrum file to fullrun_pn_xmm0059140101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Oct  6 02:08:35 2011] Updating aperture counts using extracted products
[Thu Oct  6 02:08:35 2011] Error reading totcts from fullrun_pn_xmm0059140101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Oct  6 02:08:38 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 02:08:38 2011] Using photon index=1.80, rate=0.194, arf fullrun_pn_xmm0059140101_pi300-10000_pass1_cl_src3.arf
[Thu Oct  6 02:08:38 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Oct  6 02:08:38 2011] Updating source flux to 4.4e-13
[Thu Oct  6 02:21:19 2011] Flag c found in src. 3 procflags, skipping spectral fitting