[Wed Oct 5 10:12:56 2011] Detection parameters: Position = (304.2, 313.1) = 12 18 51.35 47 17 41.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 29.4 +/- 8.4 Background counts = 8.6 Rate = 0.003 +/- 0.0007 [Wed Oct 5 10:12:56 2011] Off-axis axis estimate = 1.14' [Wed Oct 5 13:53:19 2011] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting [Wed Oct 5 13:53:19 2011] Initial guess for spatial extent in simple fitting = 7.00" [Wed Oct 5 13:53:19 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.899 [Wed Oct 5 13:53:19 2011] Giving source the simple spatial ID 41 for pass 0, mean size = 7.00" [Wed Oct 5 15:31:24 2011] fullrun_mos2_xmm0059140101_pi300-10000_cl_pass0_src41.ximg exists [Wed Oct 5 15:31:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140101_pi300-10000_cl_pass0_src41.csv [Wed Oct 5 15:31:24 2011] fullrun_mos2_xmm0059140101_pi300-10000_cl_pass0_src41_1.ximg exists [Wed Oct 5 15:31:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140101_pi300-10000_cl_pass0_src41.csv [Wed Oct 5 15:31:24 2011] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0059140101_pi300-10000_cl_pass0_src41_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0059140101_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Oct 5 15:31:25 2011] fullrun_mos2_xmm0059140101_pi300-10000_cl_pass0_tfrozen_src41.ximg exists [Wed Oct 5 15:31:25 2011] fullrun_mos2_xmm0059140101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists [Wed Oct 5 15:31:25 2011] Fit fullrun_mos2_xmm0059140101_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly [Wed Oct 5 15:31:49 2011] Source 34 is offset by 6.464442 and -5.127765 pixels which is larger than 2 X fitted extent = 3.830809 x 3.830809, not incorporating fit results [Wed Oct 5 15:31:49 2011] Vigneting correction estimate = 1.000000 [Wed Oct 5 15:31:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Oct 5 15:31:49 2011] Assessing source extent using major [Wed Oct 5 15:31:49 2011] Source does appear to be extended [Wed Oct 5 15:31:49 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Oct 5 18:14:49 2011] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting [Wed Oct 5 18:14:49 2011] Initial guess for spatial extent in simple fitting = 7.00" [Wed Oct 5 18:14:49 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.899 [Wed Oct 5 18:14:49 2011] Giving source the simple spatial ID 32 for pass 1, mean size = 7.00" [Wed Oct 5 19:24:17 2011] fullrun_mos2_xmm0059140101_pi300-10000_cl_pass1_src32.ximg exists [Wed Oct 5 19:24:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140101_pi300-10000_cl_pass1_src32.csv [Wed Oct 5 19:24:17 2011] fullrun_mos2_xmm0059140101_pi300-10000_cl_pass1_src32_1.ximg exists [Wed Oct 5 19:24:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0059140101_pi300-10000_cl_pass1_src32.csv [Wed Oct 5 19:24:17 2011] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0059140101_pi300-10000_cl_pass1_src32_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0059140101_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Oct 5 19:24:17 2011] fullrun_mos2_xmm0059140101_pi300-10000_cl_pass1_tfrozen_src32.ximg exists [Wed Oct 5 19:24:17 2011] fullrun_mos2_xmm0059140101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists [Wed Oct 5 19:24:17 2011] Fit fullrun_mos2_xmm0059140101_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly [Wed Oct 5 19:24:37 2011] Warning, spatial fit 6 centroid is now closest to src. 9 [Wed Oct 5 19:24:37 2011] Warning, spatial fit 15 centroid is now closest to src. 24 [Wed Oct 5 19:24:37 2011] Spatial fit model total counts = 282.764000, observed total counts = 284.000000 [Wed Oct 5 19:24:37 2011] Offset between fit and detection position for source 34 = 4.327408 pixels [Wed Oct 5 19:24:37 2011] 263.981600 total counts/ 225.082000 bgd. counts: snr = 2.592834 Spatial fit parameters: Offset between fit and detection position for source 34 = 4.327408 pixels Position = (306.0, 309.2) = 12 18 50.56 47 17 22.6 Extent = 14.0 (14.0-14.0)", rotation angle = 0 Source counts = 38.9 +/- 16.2 Background counts = 225.1 Rate = 0.003 +/- 0.001 [Wed Oct 5 19:24:37 2011] Vigneting correction estimate = 1.000000 [Wed Oct 5 19:24:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Oct 5 19:24:37 2011] Assessing source extent using major axis lower bound [Wed Oct 5 19:24:37 2011] Source does appear to be extended [Wed Oct 5 19:24:37 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Oct 5 19:24:37 2011] Source is confused with source 37 [Thu Oct 6 01:12:15 2011] XMMSAS src. selection expression = ellipse(26577.646000, 26853.360000, 840.072024, 840.072024, 0.000000, X, Y) [Thu Oct 6 01:12:15 2011] Writing source region out to fullrun_mos2_xmm0059140101_pi300-10000_pass1_cl_src34_src.reg [Thu Oct 6 01:12:15 2011] Extracting stamp from image fullrun_mos2_xmm0059140101_pi300-10000_cl_sm2.00.img.gz, (258, 261) - (354, 357) [Thu Oct 6 01:12:15 2011] XMMSAS bgd. selection expression = annulus(26577.646000, 26853.360000, 1400.120040, 2800.240081, X, Y) && !ellipse(25153.202400, 27928.317200, 516.271215, 516.271215, 0.000000, X, Y) && !ellipse(25649.818000, 28810.378000, 454.104813, 454.104813, 0.000000, X, Y) && !ellipse(24394.382800, 26911.799400, 1224.376035, 728.098421, 314.957000, X, Y) && !ellipse(25066.037800, 25340.477000, 458.514413, 458.514413, 0.000000, X, Y) && !ellipse(26047.786000, 29264.924000, 908.208026, 908.208026, 0.000000, X, Y) && !ellipse(27911.260600, 27037.435800, 395.384811, 341.210410, 0.000000, X, Y) && !ellipse(23608.909800, 28290.316800, 642.847218, 642.847218, 0.000000, X, Y) && !ellipse(25704.860704, 26183.704200, 430.108012, 430.108012, 0.000000, X, Y) && !ellipse(27647.672400, 28294.121240, 427.220012, 427.220012, 0.000000, X, Y) && !ellipse(26397.676000, 28992.456000, 1221.648035, 1221.648035, 0.000000, X, Y) && !ellipse(25188.108368, 29021.829956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23659.278778, 26413.189331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23247.606000, 26489.132400, 1223.512035, 1223.512035, 0.000000, X, Y) && !ellipse(27010.512512, 28596.645599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23347.575684, 27315.970978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26800.049200, 26143.322400, 501.898414, 501.898414, 0.000000, X, Y) && !ellipse(27482.767883, 27802.170563, 870.000000, 870.000000, 0.000000, X, Y) [Thu Oct 6 01:12:15 2011] Writing fullrun_mos2_xmm0059140101_pi300-10000_pass1_cl_src34.gif [Thu Oct 6 01:17:10 2011] Mean detx,y = (158.95, -1533.50) [Thu Oct 6 01:17:11 2011] Setting backscal keywords in source and bgd. spectrum [Thu Oct 6 01:17:22 2011] Binned source spectrum to 10 counts/bin [Thu Oct 6 01:17:22 2011] Setting source spectrum file to fullrun_mos2_xmm0059140101_pi300-10000_pass1_cl_src34_src_b10.pi.gz [Thu Oct 6 01:17:22 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0059140101_pi300-10000_pass1_cl_src34_bgd.pi.gz [Thu Oct 6 02:08:11 2011] Not generating rmf since there are only 38 counts [Thu Oct 6 02:08:11 2011] rmf not generated due to insufficient counts [Thu Oct 6 02:08:45 2011] Updating aperture counts using extracted products [Thu Oct 6 02:08:45 2011] Error reading totcts from fullrun_mos2_xmm0059140101_pi300-10000_pass1_cl_src34_src_b10.pi.gz [Thu Oct 6 02:08:47 2011] Calculating source flux in energy range 0.30-8.00 [Thu Oct 6 02:08:47 2011] Using photon index=1.80, rate=0.00321, arf fullrun_mos2_xmm0059140101_pi300-10000_pass1_cl_src34.arf [Thu Oct 6 02:08:47 2011] Assuming count rate is from the 0.30-10.00 bandpass [Thu Oct 6 02:08:47 2011] Updating source flux to 3.3e-14 [Thu Oct 6 02:13:24 2011] Flag b found in src. 34 procflags, skipping spectral fitting [Thu Oct 6 02:13:24 2011] Flag c found in src. 34 procflags, skipping spectral fitting [Thu Oct 6 02:13:24 2011] Source 34 has fewer than 100.000000 counts, skipping spectral fitting