[Sun Jul 29 10:15:50 2012] Detection parameters:
  Position = (403.4, 324.9) = 14 3 38.75 -33 58 41.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1698.4 +/- 49.3
  Background counts = 17.1
  Rate = 0.2 +/- 0.005

[Sun Jul 29 10:15:52 2012] Off-axis axis estimate = 7.85'
[Sun Jul 29 11:33:04 2012] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 11:33:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 29 11:33:04 2012] Initial guess for spatial extent in simple fitting = 10.35"
[Sun Jul 29 11:33:04 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.904
[Sun Jul 29 11:33:04 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.35"
[Sun Jul 29 12:12:18 2012] fullrun_mos2_xmm0058940301_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul 29 12:12:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0058940301_pi300-10000_cl_pass0_src1.csv
[Sun Jul 29 12:12:18 2012] fullrun_mos2_xmm0058940301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul 29 12:12:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0058940301_pi300-10000_cl_pass0_src1.csv
[Sun Jul 29 12:12:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0058940301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0058940301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 12:12:18 2012] fullrun_mos2_xmm0058940301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul 29 12:12:19 2012] fullrun_mos2_xmm0058940301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul 29 12:12:19 2012] Fit fullrun_mos2_xmm0058940301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jul 29 12:12:39 2012] Spatial fit model total counts = 2115.940000, observed total counts = 2113.000000
[Sun Jul 29 12:12:39 2012] Offset between fit and detection position for source 2 = 0.289266 pixels
[Sun Jul 29 12:12:39 2012] 2100.594000 total counts/ 713.004000 bgd. counts: snr = 51.965508
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.289266 pixels
  Position = (403.2, 324.8) = 14 3 38.84 -33 58 41.2
  Extent = 7.5 (7.2-7.7)", rotation angle = 0
  Source counts = 1387.6 +/- 45.8
  Background counts = 713.0
  Rate = 0.07 +/- 0.002
[Sun Jul 29 12:12:39 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 12:12:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 12:12:39 2012] Assessing source extent using major axis lower bound
[Sun Jul 29 12:12:39 2012] Source does appear to be extended
[Sun Jul 29 12:12:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 13:28:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 29 13:28:42 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Sun Jul 29 13:28:42 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.806
[Sun Jul 29 13:28:42 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.52"
[Sun Jul 29 13:57:59 2012] fullrun_mos2_xmm0058940301_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul 29 13:57:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0058940301_pi300-10000_cl_pass1_src1.csv
[Sun Jul 29 13:57:59 2012] fullrun_mos2_xmm0058940301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul 29 13:57:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0058940301_pi300-10000_cl_pass1_src1.csv
[Sun Jul 29 13:57:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0058940301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0058940301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 13:57:59 2012] fullrun_mos2_xmm0058940301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul 29 13:57:59 2012] fullrun_mos2_xmm0058940301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul 29 13:57:59 2012] Fit fullrun_mos2_xmm0058940301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jul 29 13:58:16 2012] Spatial fit model total counts = 1960.810000, observed total counts = 1960.000000
[Sun Jul 29 13:58:16 2012] Offset between fit and detection position for source 2 = 0.006518 pixels
[Sun Jul 29 13:58:16 2012] 1955.281000 total counts/ 634.281000 bgd. counts: snr = 52.451990
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.006518 pixels
  Position = (403.2, 324.8) = 14 3 38.84 -33 58 41.1
  Extent = 7.1 (6.8-7.6)", rotation angle = 0
  Source counts = 1321.0 +/- 44.2
  Background counts = 634.3
  Rate = 0.07 +/- 0.002
[Sun Jul 29 13:58:16 2012] Vigneting correction estimate = 1.000000
[Sun Jul 29 13:58:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 29 13:58:16 2012] Assessing source extent using major axis lower bound
[Sun Jul 29 13:58:16 2012] Source does appear to be extended
[Sun Jul 29 13:58:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 29 14:49:14 2012] Counts = 1321.000000, rescaling region sizes by 2.000000
[Sun Jul 29 14:49:14 2012] XMMSAS src. selection expression = ellipse(35026.718040, 28205.959600, 857.240425, 857.240425, 0.000000, X, Y)
[Sun Jul 29 14:49:14 2012] Writing source region out to fullrun_mos2_xmm0058940301_pi300-10000_pass1_cl_src2_src.reg
[Sun Jul 29 14:49:14 2012] Extracting stamp from image fullrun_mos2_xmm0058940301_pi300-10000_cl_sm2.00.img.gz, (354, 275) - (452, 374)
[Sun Jul 29 14:49:14 2012] XMMSAS bgd. selection expression = annulus(35026.718040, 28205.959600, 2857.468082, 5714.936164, X, Y) && !ellipse(39302.007812, 27603.245148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31017.314300, 24573.151800, 365.315211, 365.315211, 0.000000, X, Y) && !ellipse(35101.329315, 29101.225952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36741.386047, 24487.839081, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 29 14:49:14 2012] Writing fullrun_mos2_xmm0058940301_pi300-10000_pass1_cl_src2.gif
[Sun Jul 29 14:49:19 2012] Mean detx,y = (10371.41, 315.74) 
[Sun Jul 29 14:49:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 29 14:50:07 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 29 14:50:07 2012] Setting source spectrum file to fullrun_mos2_xmm0058940301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jul 29 14:50:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0058940301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jul 29 15:04:37 2012] Updating aperture counts using extracted products
[Sun Jul 29 15:04:37 2012] Error reading totcts from fullrun_mos2_xmm0058940301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jul 29 15:04:38 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 15:04:38 2012] Using photon index=1.80, rate=0.0684, arf fullrun_mos2_xmm0058940301_pi300-10000_pass1_cl_src2.arf
[Sun Jul 29 15:04:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 15:04:38 2012] Updating source flux to 1.3e-12
[Sun Jul 29 15:05:09 2012] Reading fit data from xmm0058940301/analysis//spectral/fullrun_mos2_xmm0058940301_pi300-10000_pass1_cl_src2_pl.csv
[Sun Jul 29 15:05:09 2012] Spectral fit parameter nH value = 1.53353e+21
[Sun Jul 29 15:05:09 2012] Spectral fit parameter PhoIndex value = 2.61439
[Sun Jul 29 15:05:09 2012] Failed to get F(0.3-8.0) from xmm0058940301/analysis//spectral/fullrun_mos2_xmm0058940301_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Jul 29 15:05:09 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 29 15:05:09 2012] Using Nh = 1.5e+21, photon index=2.61, rate=0.0684, arf fullrun_mos2_xmm0058940301_pi300-10000_pass1_cl_src2.arf
[Sun Jul 29 15:05:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 29 15:05:10 2012] Updating source flux to 1.1e-12