[Sun Jul 29 10:15:19 2012] Detection parameters:
  Position = (404.7, 335.3) = 14 3 38.32 -33 57 57.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.6 +/- 9.4
  Background counts = 15.2
  Rate = 0.002 +/- 0.0005

[Sun Jul 29 10:15:20 2012] Off-axis axis estimate = 8.15'
[Sun Jul 29 10:52:53 2012] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Sun Jul 29 10:52:53 2012] Initial guess for spatial extent in simple fitting = 10.50"
[Sun Jul 29 10:52:53 2012] source mask rpix=2.4, npix_max = 33, mask sum = 32, frac = 0.942
[Sun Jul 29 10:52:53 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 10.50"
[Sun Jul 29 11:33:04 2012] fullrun_mos1_xmm0058940301_pi300-10000_cl_pass0_src23.ximg exists
[Sun Jul 29 11:33:04 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0058940301_pi300-10000_cl_pass0_src23.csv
[Sun Jul 29 11:33:04 2012] fullrun_mos1_xmm0058940301_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun Jul 29 11:33:04 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0058940301_pi300-10000_cl_pass0_src23.csv
[Sun Jul 29 11:33:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0058940301_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0058940301_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 11:33:04 2012] fullrun_mos1_xmm0058940301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun Jul 29 11:33:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0058940301_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sun Jul 29 11:33:04 2012] fullrun_mos1_xmm0058940301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun Jul 29 11:33:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0058940301_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sun Jul 29 11:33:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0058940301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0058940301_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 29 12:12:33 2012] Spatial fit model total counts = 2080.980000, observed total counts = 1980.000000
[Sun Jul 29 12:12:33 2012] Offset between fit and detection position for source 7 = 9.021696 pixels
[Sun Jul 29 12:12:33 2012] Warning, changing simple spatial fit ID from 23 to 1
[Sun Jul 29 12:12:33 2012] 2134.580000 total counts/ 2134.580000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 9.021696 pixels
  Position = (413.6, 336.6) = 14 3 35.20 -33 57 49.7
  Extent = 24.1" x 3.0", rotation angle = 0
  Source counts = 0.0 +/- 46.2
  Background counts = 2134.6
  Rate = 2e-13 +/- 0.002
  Deleting source due to low Poisson probability