[Thu May 2 01:17:01 2013] Detection parameters: Position = (414.2, 406.2) = 12 52 14.32 -29 17 37.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 154.1 +/- 22.3 Background counts = 68.8 Rate = 0.002 +/- 0.0003 [Thu May 2 01:17:03 2013] Off-axis axis estimate = 11.47' [Thu May 2 01:17:46 2013] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting [Thu May 2 01:17:46 2013] Initial guess for spatial extent in simple fitting = 12.16" [Thu May 2 01:17:46 2013] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.128 [Thu May 2 01:17:46 2013] Giving source the simple spatial ID 45 for pass 0, mean size = 12.16" [Thu May 2 01:17:47 2013] fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_src45.ximg exists [Thu May 2 01:17:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_src45.csv [Thu May 2 01:17:47 2013] fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_src45_1.ximg exists [Thu May 2 01:17:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_src45.csv [Thu May 2 01:17:47 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_src45_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 01:17:49 2013] fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src45.ximg exists [Thu May 2 01:17:49 2013] fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists [Thu May 2 01:17:49 2013] Fit fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly [Thu May 2 01:18:15 2013] Spatial fit model total counts = 2684.030000, observed total counts = 2545.000000 [Thu May 2 01:18:15 2013] Offset between fit and detection position for source 47 = 6.892414 pixels [Thu May 2 01:18:15 2013] 1350.556000 total counts/ 561.884000 bgd. counts: snr = 33.271554 Spatial fit parameters: Offset between fit and detection position for source 47 = 6.892414 pixels Position = (412.2, 412.8) = 12 52 15.01 -29 17 8.6 Extent = 24.3 (24.3-48.6)", rotation angle = 0 Source counts = 788.7 +/- 36.7 Background counts = 561.9 Rate = 0.01 +/- 0.0006 [Thu May 2 01:18:15 2013] Vigneting correction estimate = 1.000000 [Thu May 2 01:18:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 2 01:18:15 2013] Assessing source extent using major axis lower bound [Thu May 2 01:18:15 2013] Source does appear to be extended [Thu May 2 01:18:15 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 2 01:18:15 2013] Source is confused with source 6 [Thu May 2 01:18:55 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Thu May 2 01:18:55 2013] Initial guess for spatial extent in simple fitting = 24.32" [Thu May 2 01:18:55 2013] source mask rpix=5.6, npix_max = 148, mask sum = 144, frac = 0.970 [Thu May 2 01:18:55 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 24.32" [Thu May 2 01:18:57 2013] fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_src43.ximg exists [Thu May 2 01:18:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_src43.csv [Thu May 2 01:18:57 2013] fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_src43_1.ximg exists [Thu May 2 01:18:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_src43.csv [Thu May 2 01:18:57 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_src43_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 01:18:58 2013] fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src43.ximg exists [Thu May 2 01:18:58 2013] fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists [Thu May 2 01:18:58 2013] Fit fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly [Thu May 2 01:19:22 2013] Source 47 is offset by -4.686326 and 1.943839 pixels which is larger than 2 X fitted extent = 1.354929 x 1.354929, not incorporating fit results [Thu May 2 01:19:22 2013] Warning, spatial fit 43 centroid is now closest to src. 1 [Thu May 2 01:19:22 2013] Vigneting correction estimate = 1.000000 [Thu May 2 01:19:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 2 01:19:22 2013] Assessing source extent using major axis lower bound [Thu May 2 01:19:22 2013] Source does appear to be extended [Thu May 2 01:19:22 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 2 01:19:54 2013] XMMSAS src. selection expression = ellipse(35808.819600, 35863.644000, 1459.494042, 1459.494042, 0.000000, X, Y) [Thu May 2 01:19:54 2013] Not overwriting source region fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src47_src.reg [Thu May 2 01:19:54 2013] Extracting stamp from image fullrun_pn_xmm0057740401_pi300-10000_cl_sm2.00.img.gz, (328, 329) - (496, 497) [Thu May 2 01:19:54 2013] XMMSAS bgd. selection expression = annulus(35808.819600, 35863.644000, 2432.490070, 4864.980140, X, Y) && !ellipse(33672.833282, 38327.375763, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(33527.773102, 37845.349884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33228.670776, 38584.398529, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(37114.032684, 38904.504791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36819.173096, 38222.764954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36780.594000, 36219.178400, 1353.688039, 1353.688039, 0.000000, X, Y) && !ellipse(36031.170000, 36596.969800, 1431.624041, 1431.624041, 0.000000, X, Y) && !ellipse(35115.400970, 35802.026062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35326.674927, 34683.026794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38565.326000, 34230.210000, 525.700815, 525.700815, 0.000000, X, Y) && !ellipse(36371.057251, 31806.830902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38573.654200, 31751.202400, 1200.560035, 888.936026, 235.702000, X, Y) && !ellipse(36716.444702, 30716.524536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35838.973450, 30830.019073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37185.675995, 30223.172302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33164.458893, 39817.017120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30063.138000, 40619.327700, 2032.384058, 2032.384058, 0.000000, X, Y) && !ellipse(34903.943817, 34657.764191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33424.057037, 34227.182159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35230.000000, 33964.464355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35724.188568, 32826.407288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33669.977800, 32164.436000, 378.968011, 378.968011, 0.000000, X, Y) && !ellipse(37936.061615, 30585.870544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28437.170000, 41664.636000, 4064.768117, 4064.768117, 0.000000, X, Y) && !ellipse(37244.052124, 37292.652435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38015.784000, 35446.050000, 2048.016059, 2048.016059, 0.000000, X, Y) && !ellipse(34376.113373, 35966.839661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34400.359100, 35523.893158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37201.144000, 35649.218000, 2863.248082, 2863.248082, 0.000000, X, Y) && !ellipse(35887.815369, 33470.100555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35986.330231, 32202.918793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36391.662933, 31173.266571, 870.000000, 870.000000, 0.000000, X, Y) [Thu May 2 01:19:54 2013] Writing fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src47.gif [Thu May 2 01:20:04 2013] ../../xmm0057740401/products/events/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src47_src.evt and ../../xmm0057740401/products/events/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src47_bgd.evt exist, delete to re-create [Thu May 2 01:20:04 2013] Mean detx,y = (-14047.65, 6830.34) [Thu May 2 01:20:04 2013] ../../xmm0057740401/products/images/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src47_src.img and ../../xmm0057740401/products/images/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src47_bgd.img exist, delete to re-create [Thu May 2 01:20:04 2013] ../../xmm0057740401/products/spectra/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src47_src_b10.pi.gz and ../../xmm0057740401/products/spectra/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src47_bgd.pi exist, delete to re-create [Thu May 2 01:20:04 2013] Setting source spectrum file to fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src47_src_b10.pi.gz [Thu May 2 01:20:04 2013] Setting bgd. spectrum file to fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src47_bgd.pi.gz [Thu May 2 01:20:04 2013] ../../xmm0057740401/products/lightcurves/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src47_src.lc and ../../xmm0057740401/products/lightcurves/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src47_bgd.lc exist, delete to re-create [Thu May 2 01:21:05 2013] fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src47.rmf exists, delete to re-create [Thu May 2 01:21:05 2013] fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src47.arf exists, delete to re-create [Thu May 2 03:13:07 2013] Updating aperture counts using extracted products [Thu May 2 03:13:07 2013] Total counts from fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src47_src_b10.pi.gz = 8778.00 [Thu May 2 03:13:07 2013] Total counts from fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src47_bgd.pi.gz = 5398.00 [Thu May 2 03:13:07 2013] Got source and background scale factors 6323299.000000, 15292268.000000 [Thu May 2 03:13:07 2013] User source parameters: Position = (412.2, 412.8) = 12 52 15.01 -29 17 8.6 Extent = 24.3 (24.3-48.6)", rotation angle = 0 Source aperture counts = 6545.9 +/- 94.7 Background aperture counts = 2232.1 Rate = 0.1 +/- 0.001 [Thu May 2 03:13:18 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 2 03:13:18 2013] Using photon index=1.80, rate=0.0122, arf fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src47.arf [Thu May 2 03:13:18 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 2 03:13:18 2013] Updating source flux to 9.4e-14 [Thu May 2 03:13:46 2013] Flag b found in src. 47 procflags, skipping spectral fitting [Thu May 2 03:13:46 2013] Flag c found in src. 47 procflags, skipping spectral fitting [Thu May 2 03:13:56 2013] xmm0057740401/analysis//spectral/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src47_pl.csv not found, spectral fit skipped or did not complete