[Thu May  2 01:17:01 2013] Detection parameters:
  Position = (327.7, 469.8) = 12 52 43.10 -29 13 2.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.8 +/- 17.7
  Background counts = 68.1
  Rate = 0.001 +/- 0.0003

[Thu May  2 01:17:03 2013] Off-axis axis estimate = 12.60'
[Thu May  2 01:17:46 2013] Using EEF radius (= 12.73 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:17:46 2013] Initial guess for spatial extent in simple fitting = 12.73"
[Thu May  2 01:17:46 2013] source mask rpix=2.9, npix_max = 46, mask sum = 48, frac = 1.022
[Thu May  2 01:17:46 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 12.73"
[Thu May  2 01:17:47 2013] fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_src37.ximg exists
[Thu May  2 01:17:47 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_src37.csv
[Thu May  2 01:17:47 2013] fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_src37_1.ximg exists
[Thu May  2 01:17:47 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_src37.csv
[Thu May  2 01:17:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:17:49 2013] fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Thu May  2 01:17:49 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src37.csv
[Thu May  2 01:17:49 2013] fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Thu May  2 01:17:49 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src37.csv
[Thu May  2 01:17:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:18:15 2013] Warning, spatial fit 37 centroid is now closest to src. 103
[Thu May  2 01:18:15 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:18:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:18:15 2013] Assessing source extent using major
[Thu May  2 01:18:15 2013] Source does appear to be extended
[Thu May  2 01:18:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:18:55 2013] Using EEF radius (= 12.73 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:18:55 2013] Initial guess for spatial extent in simple fitting = 12.73"
[Thu May  2 01:18:55 2013] source mask rpix=2.9, npix_max = 46, mask sum = 48, frac = 1.022
[Thu May  2 01:18:55 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 12.73"
[Thu May  2 01:18:56 2013] fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_src35.ximg exists
[Thu May  2 01:18:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_src35.csv
[Thu May  2 01:18:56 2013] fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_src35_1.ximg exists
[Thu May  2 01:18:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_src35.csv
[Thu May  2 01:18:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:18:58 2013] fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Thu May  2 01:18:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src35.csv
[Thu May  2 01:18:58 2013] fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Thu May  2 01:18:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src35.csv
[Thu May  2 01:18:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:19:22 2013] Spatial fit model total counts = 9603.970000, observed total counts = 9255.000000
[Thu May  2 01:19:22 2013] Offset between fit and detection position for source 39 = 9.669857 pixels
[Thu May  2 01:19:22 2013] Warning, changing simple spatial fit ID from 35 to 24
[Thu May  2 01:19:22 2013] 9542.520000 total counts/ 4673.290000 bgd. counts: snr = 71.227700
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 9.669857 pixels
  Position = (327.4, 479.5) = 12 52 43.19 -29 12 18.8
  Extent = 50.8 (50.7-101.6)", rotation angle = 0
  Source counts = 4869.2 +/- 97.7
  Background counts = 4673.3
  Rate = 0.08 +/- 0.002
[Thu May  2 01:19:22 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:19:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:19:22 2013] Assessing source extent using major axis lower bound
[Thu May  2 01:19:22 2013] Source does appear to be extended
[Thu May  2 01:19:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:19:22 2013] Source is confused with source 27
[Thu May  2 01:19:22 2013] Source is confused with source 103
[Thu May  2 01:19:53 2013] Counts = 4869.230000, rescaling region sizes by 2.000000
[Thu May  2 01:19:53 2013] XMMSAS src. selection expression = ellipse(28437.170000, 41664.636000, 6097.152175, 6097.152175, 0.000000, X, Y)
[Thu May  2 01:19:53 2013] Not overwriting source region fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src39_src.reg
[Thu May  2 01:19:53 2013] Extracting stamp from image fullrun_pn_xmm0057740401_pi300-10000_cl_sm2.00.img.gz, (0, 129) - (595, 595)
[Thu May  2 01:19:53 2013] XMMSAS bgd. selection expression = annulus(28437.170000, 41664.636000, 20323.840585, 40647.681170, X, Y) && !ellipse(33672.833282, 38327.375763, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(33527.773102, 37845.349884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33228.670776, 38584.398529, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(37114.032684, 38904.504791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36819.173096, 38222.764954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36780.594000, 36219.178400, 1353.688039, 1353.688039, 0.000000, X, Y) && !ellipse(36031.170000, 36596.969800, 1431.624041, 1431.624041, 0.000000, X, Y) && !ellipse(35115.400970, 35802.026062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35326.674927, 34683.026794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38565.326000, 34230.210000, 525.700815, 525.700815, 0.000000, X, Y) && !ellipse(21868.969955, 32239.459961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36371.057251, 31806.830902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38573.654200, 31751.202400, 1200.560035, 888.936026, 235.702000, X, Y) && !ellipse(36716.444702, 30716.524536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35838.973450, 30830.019073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37185.675995, 30223.172302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26399.165466, 9496.814865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23598.524000, 25623.546000, 419.900812, 419.900812, 0.000000, X, Y) && !ellipse(17740.155136, 22265.322021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17853.243454, 21610.234695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35605.190155, 14471.200760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17733.395432, 13163.497940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31325.936066, 11780.493179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17264.170264, 11996.069000, 503.661614, 503.661614, 0.000000, X, Y) && !ellipse(33164.458893, 39817.017120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30063.138000, 40619.327700, 2032.384058, 2032.384058, 0.000000, X, Y) && !ellipse(34903.943817, 34657.764191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33424.057037, 34227.182159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35230.000000, 33964.464355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35724.188568, 32826.407288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33669.977800, 32164.436000, 378.968011, 378.968011, 0.000000, X, Y) && !ellipse(37936.061615, 30585.870544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37503.310425, 29793.800964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37097.438751, 29442.317566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37485.463318, 28737.537384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28013.500275, 7457.883125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25275.803986, 38183.903290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29693.722290, 38037.401428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37244.052124, 37292.652435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38015.784000, 35446.050000, 2048.016059, 2048.016059, 0.000000, X, Y) && !ellipse(34376.113373, 35966.839661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34400.359100, 35523.893158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37201.144000, 35649.218000, 2863.248082, 2863.248082, 0.000000, X, Y) && !ellipse(35808.819600, 35863.644000, 1945.992056, 1945.992056, 0.000000, X, Y) && !ellipse(25625.959869, 34918.631439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22254.202759, 8197.659248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27743.712128, 34553.795898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28922.099091, 33869.892212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17382.813416, 33541.823517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18828.831314, 33542.057159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35887.815369, 33470.100555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22583.653600, 33228.902800, 508.913615, 508.913615, 0.000000, X, Y) && !ellipse(35986.330231, 32202.918793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13658.403366, 31345.907196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31232.978180, 8715.466957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36391.662933, 31173.266571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16503.447800, 30865.553986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27617.738504, 30747.696600, 391.215211, 391.215211, 0.000000, X, Y) && !ellipse(21888.384000, 30735.558000, 392.369611, 276.000008, 337.790935, X, Y) && !ellipse(36982.848000, 29832.478000, 943.864027, 943.864027, 0.000000, X, Y) && !ellipse(22285.064819, 30209.427216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20295.895630, 29709.910004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15697.422058, 29549.522339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26808.820557, 29524.618164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13239.121140, 29232.211823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37805.574890, 29004.139496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22803.213600, 28283.652000, 289.340008, 289.340008, 0.000000, X, Y) && !ellipse(39118.940887, 28125.481445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21442.690399, 27821.953186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23655.789000, 27718.104000, 288.948008, 288.948008, 0.000000, X, Y) && !ellipse(30743.952920, 26467.576800, 363.720010, 363.720010, 0.000000, X, Y) && !ellipse(24417.382000, 26523.880000, 1153.944033, 1153.944033, 0.000000, X, Y) && !ellipse(33605.950439, 26039.894867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26579.168488, 24009.262085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25507.585388, 23631.177948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24835.284180, 23011.048065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38774.963257, 23013.087128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11949.622528, 22452.028992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23897.649963, 21297.439056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24774.306122, 20252.586792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32368.061475, 20233.784450, 471.392872, 244.781251, 77.286231, X, Y) && !ellipse(29591.362946, 19218.069229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33887.600150, 17231.034146, 556.726324, 294.562933, 319.650593, X, Y) && !ellipse(35906.204102, 11053.781128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20232.648849, 16482.394745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27982.566528, 14832.483871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20610.065247, 14781.674576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23680.327850, 13712.081421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31088.122437, 13692.666519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20048.343360, 13409.727200, 645.636819, 645.636819, 0.000000, X, Y) && !ellipse(40396.201141, 12816.254623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24014.768616, 12626.080185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29278.281891, 41177.095703, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  2 01:19:53 2013] Writing fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src39.gif
[Thu May  2 01:20:02 2013] ../../xmm0057740401/products/events/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src39_src.evt and ../../xmm0057740401/products/events/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src39_bgd.evt exist, delete to re-create
[Thu May  2 01:20:03 2013] Mean detx,y = (-12282.38, 10630.93) 
[Thu May  2 01:20:03 2013] ../../xmm0057740401/products/images/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src39_src.img and ../../xmm0057740401/products/images/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src39_bgd.img exist, delete to re-create
[Thu May  2 01:20:03 2013] ../../xmm0057740401/products/spectra/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src39_src_b10.pi.gz and ../../xmm0057740401/products/spectra/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src39_bgd.pi exist, delete to re-create
[Thu May  2 01:20:03 2013] Setting source spectrum file to fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu May  2 01:20:03 2013] Setting bgd. spectrum file to fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Thu May  2 01:20:03 2013] ../../xmm0057740401/products/lightcurves/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src39_src.lc and ../../xmm0057740401/products/lightcurves/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src39_bgd.lc exist, delete to re-create
[Thu May  2 01:21:05 2013] fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src39.arf exists, delete to re-create
[Thu May  2 03:13:06 2013] Updating aperture counts using extracted products
[Thu May  2 03:13:06 2013] Total counts from fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src39_src_b10.pi.gz = 208300.00
[Thu May  2 03:13:06 2013] Total counts from fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src39_bgd.pi.gz = 92196.00
[Thu May  2 03:13:06 2013] Got source and background scale factors 34189320.000000, 337995240.000000
[Thu May  2 03:13:06 2013] User source parameters:
  Position = (327.4, 479.5) = 12 52 43.19 -29 12 18.8
  Extent = 50.8 (50.7-101.6)", rotation angle = 0
  Source aperture counts = 198974.1 +/- 457.4
  Background aperture counts = 9325.9
  Rate = 3 +/- 0.007

[Thu May  2 03:13:18 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 03:13:18 2013] Using photon index=1.80, rate=0.0756, arf fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src39.arf
[Thu May  2 03:13:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 03:13:18 2013] Getting flux using calc_pl_flux failed
[Thu May  2 03:13:46 2013] Flag c found in src. 39 procflags, skipping spectral fitting
[Thu May  2 03:13:46 2013] Source 39 has no response, skipping
[Thu May  2 03:13:56 2013] xmm0057740401/analysis//spectral/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete