[Thu May 2 01:17:00 2013] Detection parameters: Position = (337.2, 467.1) = 12 52 39.95 -29 13 13.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 175.0 +/- 22.4 Background counts = 65.7 Rate = 0.003 +/- 0.0003 [Thu May 2 01:17:03 2013] Off-axis axis estimate = 12.55' [Thu May 2 01:17:46 2013] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting [Thu May 2 01:17:46 2013] Initial guess for spatial extent in simple fitting = 12.70" [Thu May 2 01:17:46 2013] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.047 [Thu May 2 01:17:46 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 12.70" [Thu May 2 01:17:47 2013] fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_src25.ximg exists [Thu May 2 01:17:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_src25.csv [Thu May 2 01:17:47 2013] fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_src25_1.ximg exists [Thu May 2 01:17:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_src25.csv [Thu May 2 01:17:47 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_src25_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 01:17:49 2013] fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src25.ximg exists [Thu May 2 01:17:49 2013] fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists [Thu May 2 01:17:49 2013] Fit fullrun_pn_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly [Thu May 2 01:18:15 2013] Spatial fit model total counts = 1477.630000, observed total counts = 1458.000000 [Thu May 2 01:18:15 2013] Offset between fit and detection position for source 27 = 8.949772 pixels [Thu May 2 01:18:15 2013] 1469.286000 total counts/ 1178.130000 bgd. counts: snr = 8.482603 Spatial fit parameters: Offset between fit and detection position for source 27 = 8.949772 pixels Position = (346.1, 467.4) = 12 52 36.98 -29 13 11.1 Extent = 25.4 (25.4-50.8)", rotation angle = 0 Source counts = 291.2 +/- 38.3 Background counts = 1178.1 Rate = 0.005 +/- 0.0006 [Thu May 2 01:18:15 2013] Vigneting correction estimate = 1.000000 [Thu May 2 01:18:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 2 01:18:15 2013] Assessing source extent using major axis lower bound [Thu May 2 01:18:15 2013] Source does appear to be extended [Thu May 2 01:18:15 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 2 01:18:15 2013] Source is confused with source 103 [Thu May 2 01:18:55 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Thu May 2 01:18:55 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu May 2 01:18:55 2013] Initial guess for spatial extent in simple fitting = 25.40" [Thu May 2 01:18:55 2013] source mask rpix=5.8, npix_max = 160, mask sum = 156, frac = 0.970 [Thu May 2 01:18:55 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 25.40" [Thu May 2 01:18:56 2013] fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_src24.ximg exists [Thu May 2 01:18:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_src24.csv [Thu May 2 01:18:56 2013] fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_src24_1.ximg exists [Thu May 2 01:18:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_src24.csv [Thu May 2 01:18:56 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_src24_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 01:18:58 2013] fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src24.ximg exists [Thu May 2 01:18:58 2013] fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists [Thu May 2 01:18:58 2013] Fit fullrun_pn_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly [Thu May 2 01:19:22 2013] Warning, spatial fit 24 centroid is now closest to src. 39 [Thu May 2 01:19:22 2013] Vigneting correction estimate = 1.000000 [Thu May 2 01:19:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 2 01:19:22 2013] Assessing source extent using major axis lower bound [Thu May 2 01:19:22 2013] Source does appear to be extended [Thu May 2 01:19:22 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 2 01:19:53 2013] XMMSAS src. selection expression = ellipse(30063.138000, 40619.327700, 1524.288044, 1524.288044, 0.000000, X, Y) [Thu May 2 01:19:53 2013] Not overwriting source region fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src27_src.reg [Thu May 2 01:19:53 2013] Extracting stamp from image fullrun_pn_xmm0057740401_pi300-10000_cl_sm2.00.img.gz, (259, 380) - (434, 555) [Thu May 2 01:19:53 2013] XMMSAS bgd. selection expression = annulus(30063.138000, 40619.327700, 2540.480073, 5080.960146, X, Y) && !ellipse(33672.833282, 38327.375763, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(33527.773102, 37845.349884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33228.670776, 38584.398529, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(36031.170000, 36596.969800, 1431.624041, 1431.624041, 0.000000, X, Y) && !ellipse(35115.400970, 35802.026062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35326.674927, 34683.026794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33164.458893, 39817.017120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28437.170000, 41664.636000, 4064.768117, 4064.768117, 0.000000, X, Y) && !ellipse(25275.803986, 38183.903290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29693.722290, 38037.401428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34376.113373, 35966.839661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34400.359100, 35523.893158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37201.144000, 35649.218000, 2863.248082, 2863.248082, 0.000000, X, Y) && !ellipse(35808.819600, 35863.644000, 1945.992056, 1945.992056, 0.000000, X, Y) && !ellipse(25625.959869, 34918.631439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29278.281891, 41177.095703, 870.000000, 870.000000, 0.000000, X, Y) [Thu May 2 01:19:53 2013] Writing fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src27.gif [Thu May 2 01:20:01 2013] ../../xmm0057740401/products/events/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src27_src.evt and ../../xmm0057740401/products/events/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src27_bgd.evt exist, delete to re-create [Thu May 2 01:20:01 2013] Mean detx,y = (-10884.01, 12802.88) [Thu May 2 01:20:01 2013] ../../xmm0057740401/products/images/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src27_src.img and ../../xmm0057740401/products/images/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src27_bgd.img exist, delete to re-create [Thu May 2 01:20:01 2013] ../../xmm0057740401/products/spectra/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src27_src_b10.pi.gz and ../../xmm0057740401/products/spectra/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src27_bgd.pi exist, delete to re-create [Thu May 2 01:20:01 2013] Setting source spectrum file to fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src27_src_b10.pi.gz [Thu May 2 01:20:01 2013] Setting bgd. spectrum file to fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src27_bgd.pi.gz [Thu May 2 01:20:01 2013] ../../xmm0057740401/products/lightcurves/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src27_src.lc and ../../xmm0057740401/products/lightcurves/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src27_bgd.lc exist, delete to re-create [Thu May 2 01:20:20 2013] fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src27.rmf exists, delete to re-create [Thu May 2 01:20:20 2013] fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src27.arf exists, delete to re-create [Thu May 2 03:13:03 2013] Updating aperture counts using extracted products [Thu May 2 03:13:03 2013] Total counts from fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 7133.00 [Thu May 2 03:13:03 2013] Total counts from fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src27_bgd.pi.gz = 3093.00 [Thu May 2 03:13:03 2013] Got source and background scale factors 6383881.000000, 6542258.000000 [Thu May 2 03:13:03 2013] User source parameters: Position = (346.1, 467.4) = 12 52 36.98 -29 13 11.1 Extent = 25.4 (25.4-50.8)", rotation angle = 0 Source aperture counts = 4114.9 +/- 85.5 Background aperture counts = 3018.1 Rate = 0.06 +/- 0.001 [Thu May 2 03:13:18 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 2 03:13:18 2013] Using photon index=1.80, rate=0.00452, arf fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src27.arf [Thu May 2 03:13:18 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 2 03:13:18 2013] Updating source flux to 3.7e-14 [Thu May 2 03:13:46 2013] Flag c found in src. 27 procflags, skipping spectral fitting [Thu May 2 03:13:56 2013] xmm0057740401/analysis//spectral/fullrun_pn_xmm0057740401_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete