[Thu May  2 01:17:06 2013] Detection parameters:
  Position = (412.7, 354.9) = 12 52 14.81 -29 21 20.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 181.8 +/- 17.7
  Background counts = 24.2
  Rate = 0.003 +/- 0.0003

[Thu May  2 01:17:08 2013] Off-axis axis estimate = 9.24'
[Thu May  2 01:17:53 2013] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:17:53 2013] Initial guess for spatial extent in simple fitting = 11.05"
[Thu May  2 01:17:53 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.974
[Thu May  2 01:17:53 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 11.05"
[Thu May  2 01:17:53 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src11.ximg exists
[Thu May  2 01:17:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src11.csv
[Thu May  2 01:17:53 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu May  2 01:17:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src11.csv
[Thu May  2 01:17:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:17:54 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu May  2 01:17:54 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu May  2 01:17:54 2013] Fit fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu May  2 01:18:37 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 12.109314 pixels away
[Thu May  2 01:18:37 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:18:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:18:37 2013] Assessing source extent using major
[Thu May  2 01:18:37 2013] Source does appear to be extended
[Thu May  2 01:18:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:19:00 2013] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:19:00 2013] Initial guess for spatial extent in simple fitting = 11.05"
[Thu May  2 01:19:00 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.974
[Thu May  2 01:19:00 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 11.05"
[Thu May  2 01:19:00 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src11.ximg exists
[Thu May  2 01:19:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src11.csv
[Thu May  2 01:19:00 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu May  2 01:19:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src11.csv
[Thu May  2 01:19:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:19:01 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu May  2 01:19:01 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu May  2 01:19:01 2013] Fit fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu May  2 01:19:35 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 14.983379 pixels away
[Thu May  2 01:19:35 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:19:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:19:35 2013] Assessing source extent using major
[Thu May  2 01:19:35 2013] Source does appear to be extended
[Thu May  2 01:19:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 02:02:58 2013] XMMSAS src. selection expression = ellipse(35854.893005, 30824.355896, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  2 02:02:58 2013] Writing source region out to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src8_src.reg
[Thu May  2 02:02:58 2013] Extracting stamp from image fullrun_mos2_xmm0057740401_pi300-10000_cl_sm2.00.img.gz, (375, 317) - (450, 392)
[Thu May  2 02:02:58 2013] XMMSAS bgd. selection expression = annulus(35854.893005, 30824.355896, 1087.500000, 2175.000000, X, Y) && !ellipse(33714.474762, 32147.404785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38675.248000, 31733.238200, 1947.704056, 1947.704056, 0.000000, X, Y) && !ellipse(37931.241000, 30572.881600, 356.812010, 200.474406, 90.000000, X, Y) && !ellipse(34470.857600, 30516.630000, 354.733610, 354.733610, 0.000000, X, Y)
[Thu May  2 02:02:58 2013] Writing fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src8.gif
[Thu May  2 02:11:37 2013] Mean detx,y = (12232.76, -2213.47) 
[Thu May  2 02:11:38 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  2 02:11:47 2013] Binned source spectrum to 10 counts/bin
[Thu May  2 02:11:47 2013] Setting source spectrum file to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu May  2 02:11:47 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu May  2 02:39:19 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May  2 02:39:19 2013] rmf not generated due to insufficient counts
[Thu May  2 03:13:24 2013] Updating aperture counts using extracted products
[Thu May  2 03:13:24 2013] Total counts from fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 329.00
[Thu May  2 03:13:24 2013] Total counts from fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src8_bgd.pi.gz = 861.00
[Thu May  2 03:13:24 2013] Got source and background scale factors 1344000.000000, 7821980.000000
[Thu May  2 03:13:24 2013] User source parameters:
  Position = (412.7, 354.9) = 12 52 14.81 -29 21 20.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 181.1 +/- 19.2
  Background aperture counts = 147.9
  Rate = 0.003 +/- 0.0003

[Thu May  2 03:13:24 2013] Updating counts from extracted products
[Thu May  2 03:13:24 2013] Set source signif. to 181.06/12.16 = 14.89
[Thu May  2 03:13:32 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 03:13:32 2013] Using photon index=1.80, rate=0.00267, arf fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src8.arf
[Thu May  2 03:13:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 03:13:32 2013] Updating source flux to 6.4e-14
[Thu May  2 03:13:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May  2 03:13:46 2013] xmm0057740401/analysis//spectral/fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete