[Thu May  2 01:17:08 2013] Detection parameters:
  Position = (358.5, 158.5) = 12 52 32.79 -29 35 36.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.8 +/- 10.1
  Background counts = 16.7
  Rate = 0.0007 +/- 0.0001

[Thu May  2 01:17:08 2013] Off-axis axis estimate = 11.04'
[Thu May  2 01:17:53 2013] Using EEF radius (= 11.95 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:17:53 2013] Initial guess for spatial extent in simple fitting = 11.95"
[Thu May  2 01:17:53 2013] source mask rpix=2.7, npix_max = 42, mask sum = 49, frac = 1.162
[Thu May  2 01:17:53 2013] Giving source the simple spatial ID 62 for pass 0, mean size = 11.95"
[Thu May  2 01:17:54 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src62.ximg exists
[Thu May  2 01:17:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src62.csv
[Thu May  2 01:17:54 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src62_1.ximg exists
[Thu May  2 01:17:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src62.csv
[Thu May  2 01:17:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:17:55 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Thu May  2 01:17:55 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Thu May  2 01:17:55 2013] Fit fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src62 appears to have run properly
[Thu May  2 01:18:37 2013] Warning: source 62 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 66 at 14.127460 pixels away
[Thu May  2 01:18:38 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:18:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:18:38 2013] Assessing source extent using major
[Thu May  2 01:18:38 2013] Source does appear to be extended
[Thu May  2 01:18:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:19:00 2013] Using EEF radius (= 11.95 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:19:00 2013] Initial guess for spatial extent in simple fitting = 11.95"
[Thu May  2 01:19:00 2013] source mask rpix=2.7, npix_max = 42, mask sum = 49, frac = 1.162
[Thu May  2 01:19:00 2013] Giving source the simple spatial ID 61 for pass 1, mean size = 11.95"
[Thu May  2 01:19:01 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src61.ximg exists
[Thu May  2 01:19:01 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src61_1.ximg exists
[Thu May  2 01:19:01 2013] Fit fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src61 appears to have run properly
[Thu May  2 01:19:02 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Thu May  2 01:19:02 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Thu May  2 01:19:02 2013] Fit fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Thu May  2 01:19:35 2013] Warning: source 61 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 66 at 13.131566 pixels away
[Thu May  2 01:19:36 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:19:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:19:36 2013] Assessing source extent using major
[Thu May  2 01:19:36 2013] Source does appear to be extended
[Thu May  2 01:19:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 02:02:59 2013] XMMSAS src. selection expression = ellipse(31139.329987, 13738.169739, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  2 02:02:59 2013] Writing source region out to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src66_src.reg
[Thu May  2 02:02:59 2013] Extracting stamp from image fullrun_mos2_xmm0057740401_pi300-10000_cl_sm2.00.img.gz, (321, 121) - (396, 196)
[Thu May  2 02:02:59 2013] XMMSAS bgd. selection expression = annulus(31139.329987, 13738.169739, 1087.500000, 2175.000000, X, Y) && !ellipse(31308.651126, 11790.761381, 678.619746, 177.929248, 349.069254, X, Y) && !ellipse(31884.798492, 16423.471680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31276.620000, 17506.292000, 1735.080050, 1735.080050, 0.000000, X, Y)
[Thu May  2 02:02:59 2013] Writing fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src66.gif
[Thu May  2 02:29:12 2013] Mean detx,y = (1169.04, 11641.16) 
[Thu May  2 02:29:13 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  2 02:29:35 2013] Binned source spectrum to 10 counts/bin
[Thu May  2 02:29:35 2013] Setting source spectrum file to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Thu May  2 02:29:35 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src66_bgd.pi.gz
[Thu May  2 03:11:50 2013] Not generating rmf since there are only 46 counts
[Thu May  2 03:11:50 2013] rmf not generated due to insufficient counts
[Thu May  2 03:13:32 2013] Updating aperture counts using extracted products
[Thu May  2 03:13:32 2013] Total counts from fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src66_src_b10.pi.gz = 147.00
[Thu May  2 03:13:32 2013] Total counts from fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src66_bgd.pi.gz = 826.00
[Thu May  2 03:13:32 2013] Got source and background scale factors 1337600.000000, 9880076.000000
[Thu May  2 03:13:32 2013] User source parameters:
  Position = (358.5, 158.5) = 12 52 32.79 -29 35 36.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 35.2 +/- 13.2
  Background aperture counts = 111.8
  Rate = 0.0005 +/- 0.0002

[Thu May  2 03:13:32 2013] Updating counts from extracted products
[Thu May  2 03:13:32 2013] Set source signif. to 35.17/10.57 = 3.33
[Thu May  2 03:13:33 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 03:13:33 2013] Using photon index=1.80, rate=0.000519, arf fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src66.arf
[Thu May  2 03:13:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 03:13:33 2013] Updating source flux to 1.2e-14
[Thu May  2 03:13:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May  2 03:13:46 2013] xmm0057740401/analysis//spectral/fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src66_pl.csv not found, spectral fit skipped or did not complete