[Thu May  2 01:17:08 2013] Detection parameters:
  Position = (365.1, 196.5) = 12 52 30.61 -29 32 51.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.3 +/- 10.1
  Background counts = 16.7
  Rate = 0.001 +/- 0.0003

[Thu May  2 01:17:08 2013] Off-axis axis estimate = 8.83'
[Thu May  2 01:17:53 2013] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:17:53 2013] Initial guess for spatial extent in simple fitting = 10.84"
[Thu May  2 01:17:53 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.005
[Thu May  2 01:17:53 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 10.84"
[Thu May  2 01:17:54 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src37.ximg exists
[Thu May  2 01:17:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src37.csv
[Thu May  2 01:17:54 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src37_1.ximg exists
[Thu May  2 01:17:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src37.csv
[Thu May  2 01:17:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:17:55 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Thu May  2 01:17:55 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Thu May  2 01:17:55 2013] Fit fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Thu May  2 01:18:37 2013] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 63 at 12.721629 pixels away
[Thu May  2 01:18:37 2013] Spatial fit model total counts = 297.728000, observed total counts = 295.000000
[Thu May  2 01:18:37 2013] Offset between fit and detection position for source 63 = 7.299865 pixels
[Thu May  2 01:18:37 2013] 275.246000 total counts/ 119.896000 bgd. counts: snr = 14.187599
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 7.299865 pixels
  Position = (360.1, 201.8) = 12 52 32.28 -29 32 26.7
  Extent = 21.7 (21.6-43.4)", rotation angle = 0
  Source counts = 155.3 +/- 16.6
  Background counts = 119.9
  Rate = 0.002 +/- 0.0002
[Thu May  2 01:18:38 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:18:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:18:38 2013] Assessing source extent using major axis lower bound
[Thu May  2 01:18:38 2013] Source does appear to be extended
[Thu May  2 01:18:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:18:38 2013] Source is confused with source 65
[Thu May  2 01:19:00 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 01:19:00 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  2 01:19:00 2013] Initial guess for spatial extent in simple fitting = 21.69"
[Thu May  2 01:19:00 2013] source mask rpix=5.0, npix_max = 120, mask sum = 115, frac = 0.955
[Thu May  2 01:19:00 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 21.69"
[Thu May  2 01:19:01 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src37.ximg exists
[Thu May  2 01:19:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src37.csv
[Thu May  2 01:19:01 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src37_1.ximg exists
[Thu May  2 01:19:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src37.csv
[Thu May  2 01:19:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:19:02 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Thu May  2 01:19:02 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Thu May  2 01:19:02 2013] Fit fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Thu May  2 01:19:35 2013] Warning, spatial fit 37 centroid is now closest to src. 60
[Thu May  2 01:19:35 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:19:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:19:35 2013] Assessing source extent using major axis lower bound
[Thu May  2 01:19:35 2013] Source does appear to be extended
[Thu May  2 01:19:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 02:02:58 2013] XMMSAS src. selection expression = ellipse(31276.620000, 17506.292000, 1301.310037, 1301.310037, 0.000000, X, Y)
[Thu May  2 02:02:58 2013] Writing source region out to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src63_src.reg
[Thu May  2 02:02:58 2013] Extracting stamp from image fullrun_mos2_xmm0057740401_pi300-10000_cl_sm2.00.img.gz, (285, 127) - (435, 277)
[Thu May  2 02:02:58 2013] XMMSAS bgd. selection expression = annulus(31276.620000, 17506.292000, 2168.850062, 4337.700125, X, Y) && !ellipse(35633.564453, 14473.811981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31890.188202, 19329.591080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31884.798492, 16423.471680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32410.374817, 20235.242813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33892.231600, 17253.813720, 536.085615, 226.894407, 332.761591, X, Y) && !ellipse(31139.329987, 13738.169739, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  2 02:02:58 2013] Writing fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src63.gif
[Thu May  2 02:20:30 2013] Mean detx,y = (2858.75, 8462.70) 
[Thu May  2 02:20:33 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  2 02:21:45 2013] Binned source spectrum to 10 counts/bin
[Thu May  2 02:21:45 2013] Setting source spectrum file to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Thu May  2 02:21:45 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Thu May  2 03:13:28 2013] Updating aperture counts using extracted products
[Thu May  2 03:13:28 2013] Total counts from fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src63_src_b10.pi.gz = 548.00
[Thu May  2 03:13:28 2013] Total counts from fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src63_bgd.pi.gz = 3207.00
[Thu May  2 03:13:28 2013] Got source and background scale factors 4953868.000000, 35922559.000000
[Thu May  2 03:13:28 2013] User source parameters:
  Position = (360.1, 201.8) = 12 52 32.28 -29 32 26.7
  Extent = 21.7 (21.6-43.4)", rotation angle = 0
  Source aperture counts = 105.7 +/- 24.4
  Background aperture counts = 442.3
  Rate = 0.002 +/- 0.0004

[Thu May  2 03:13:33 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 03:13:33 2013] Using photon index=1.80, rate=0.00229, arf fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src63.arf
[Thu May  2 03:13:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 03:13:33 2013] Updating source flux to 3.7e-14
[Thu May  2 03:13:41 2013] Flag c found in src. 63 procflags, skipping spectral fitting
[Thu May  2 03:13:46 2013] xmm0057740401/analysis//spectral/fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src63_pl.csv not found, spectral fit skipped or did not complete