[Thu May  2 01:17:08 2013] Detection parameters:
  Position = (367.1, 222.7) = 12 52 29.93 -29 30 53.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.2 +/- 14.6
  Background counts = 14.2
  Rate = 0.004 +/- 0.0004

[Thu May  2 01:17:08 2013] Off-axis axis estimate = 7.41'
[Thu May  2 01:17:53 2013] Using EEF radius (= 10.13 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:17:53 2013] Initial guess for spatial extent in simple fitting = 10.13"
[Thu May  2 01:17:53 2013] source mask rpix=2.3, npix_max = 32, mask sum = 24, frac = 0.749
[Thu May  2 01:17:53 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 10.13"
[Thu May  2 01:17:53 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src5.ximg exists
[Thu May  2 01:17:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src5.csv
[Thu May  2 01:17:53 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu May  2 01:17:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src5.csv
[Thu May  2 01:17:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:17:54 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu May  2 01:17:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu May  2 01:17:54 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu May  2 01:17:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu May  2 01:17:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:18:37 2013] Warning, spatial fit 5 centroid is now closest to src. 57
[Thu May  2 01:18:37 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:18:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:18:37 2013] Assessing source extent using major
[Thu May  2 01:18:37 2013] Source does appear to be extended
[Thu May  2 01:18:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:19:00 2013] Using EEF radius (= 10.13 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:19:00 2013] Initial guess for spatial extent in simple fitting = 10.13"
[Thu May  2 01:19:00 2013] source mask rpix=2.3, npix_max = 32, mask sum = 24, frac = 0.749
[Thu May  2 01:19:00 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 10.13"
[Thu May  2 01:19:00 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src5.ximg exists
[Thu May  2 01:19:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src5.csv
[Thu May  2 01:19:00 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu May  2 01:19:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src5.csv
[Thu May  2 01:19:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:19:01 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu May  2 01:19:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu May  2 01:19:01 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu May  2 01:19:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu May  2 01:19:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:19:35 2013] Warning, spatial fit 5 centroid is now closest to src. 57
[Thu May  2 01:19:35 2013] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 60 at 18.611815 pixels away
[Thu May  2 01:19:35 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:19:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:19:35 2013] Assessing source extent using major
[Thu May  2 01:19:35 2013] Source does appear to be extended
[Thu May  2 01:19:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 02:02:58 2013] XMMSAS src. selection expression = ellipse(31890.188202, 19329.591080, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  2 02:02:58 2013] Writing source region out to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src60_src.reg
[Thu May  2 02:02:58 2013] Extracting stamp from image fullrun_mos2_xmm0057740401_pi300-10000_cl_sm2.00.img.gz, (330, 185) - (405, 260)
[Thu May  2 02:02:58 2013] XMMSAS bgd. selection expression = annulus(31890.188202, 19329.591080, 1087.500000, 2175.000000, X, Y) && !ellipse(31884.798492, 16423.471680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31276.620000, 17506.292000, 1735.080050, 1735.080050, 0.000000, X, Y) && !ellipse(32410.374817, 20235.242813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33892.231600, 17253.813720, 536.085615, 226.894407, 332.761591, X, Y)
[Thu May  2 02:02:58 2013] Writing fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src60.gif
[Thu May  2 02:09:47 2013] Mean detx,y = (4105.60, 6767.27) 
[Thu May  2 02:09:48 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  2 02:10:01 2013] Binned source spectrum to 10 counts/bin
[Thu May  2 02:10:01 2013] Setting source spectrum file to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Thu May  2 02:10:01 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Thu May  2 02:31:08 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May  2 02:31:08 2013] rmf not generated due to insufficient counts
[Thu May  2 03:13:23 2013] Updating aperture counts using extracted products
[Thu May  2 03:13:23 2013] Total counts from fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src60_src_b10.pi.gz = 208.00
[Thu May  2 03:13:23 2013] Total counts from fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src60_bgd.pi.gz = 504.00
[Thu May  2 03:13:23 2013] Got source and background scale factors 963622.000000, 5956785.000000
[Thu May  2 03:13:23 2013] User source parameters:
  Position = (367.1, 222.7) = 12 52 29.93 -29 30 53.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 126.5 +/- 15.4
  Background aperture counts = 81.5
  Rate = 0.002 +/- 0.0002

[Thu May  2 03:13:23 2013] Updating counts from extracted products
[Thu May  2 03:13:23 2013] Set source signif. to 126.47/9.03 = 14.01
[Thu May  2 03:13:32 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 03:13:32 2013] Using photon index=1.80, rate=0.00187, arf fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src60.arf
[Thu May  2 03:13:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 03:13:32 2013] Updating source flux to 3.8e-14
[Thu May  2 03:13:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May  2 03:13:46 2013] xmm0057740401/analysis//spectral/fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src60_pl.csv not found, spectral fit skipped or did not complete