[Thu May  2 01:17:08 2013] Detection parameters:
  Position = (293.0, 273.0) = 12 52 54.61 -29 27 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.5 +/- 15.4
  Background counts = 22.1
  Rate = 0.002 +/- 0.0002

[Thu May  2 01:17:08 2013] Off-axis axis estimate = 1.88'
[Thu May  2 01:17:53 2013] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:17:53 2013] Initial guess for spatial extent in simple fitting = 7.37"
[Thu May  2 01:17:53 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.831
[Thu May  2 01:17:53 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 7.37"
[Thu May  2 01:17:53 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src21.ximg exists
[Thu May  2 01:17:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src21.csv
[Thu May  2 01:17:53 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu May  2 01:17:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src21.csv
[Thu May  2 01:17:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:17:54 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu May  2 01:17:54 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu May  2 01:17:54 2013] Fit fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Thu May  2 01:18:37 2013] Spatial fit model total counts = 467.121000, observed total counts = 437.000000
[Thu May  2 01:18:37 2013] Offset between fit and detection position for source 54 = 0.752902 pixels
[Thu May  2 01:18:37 2013] 465.479000 total counts/ 226.285000 bgd. counts: snr = 15.900925
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 0.752902 pixels
  Position = (293.7, 272.6) = 12 52 54.40 -29 27 18.5
  Extent = 14.7 (14.7-29.5)", rotation angle = 0
  Source counts = 239.2 +/- 21.6
  Background counts = 226.3
  Rate = 0.004 +/- 0.0003
[Thu May  2 01:18:37 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:18:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:18:37 2013] Assessing source extent using major axis lower bound
[Thu May  2 01:18:37 2013] Source does appear to be extended
[Thu May  2 01:18:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:19:00 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 01:19:00 2013] Initial guess for spatial extent in simple fitting = 14.74"
[Thu May  2 01:19:00 2013] source mask rpix=3.4, npix_max = 60, mask sum = 60, frac = 0.992
[Thu May  2 01:19:00 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 14.74"
[Thu May  2 01:19:01 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src21.ximg exists
[Thu May  2 01:19:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src21.csv
[Thu May  2 01:19:01 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu May  2 01:19:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src21.csv
[Thu May  2 01:19:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:19:01 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu May  2 01:19:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu May  2 01:19:01 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu May  2 01:19:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src21.csv
[Thu May  2 01:19:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:19:35 2013] Warning, spatial fit 21 centroid is now closest to src. 52
[Thu May  2 01:19:35 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:19:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:19:35 2013] Assessing source extent using major axis lower bound
[Thu May  2 01:19:35 2013] Source does appear to be extended
[Thu May  2 01:19:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 02:02:58 2013] XMMSAS src. selection expression = ellipse(25502.225400, 23670.931200, 884.412025, 884.412025, 0.000000, X, Y)
[Thu May  2 02:02:58 2013] Writing source region out to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src54_src.reg
[Thu May  2 02:02:58 2013] Extracting stamp from image fullrun_mos2_xmm0057740401_pi300-10000_cl_sm2.00.img.gz, (243, 222) - (345, 323)
[Thu May  2 02:02:58 2013] XMMSAS bgd. selection expression = annulus(25502.225400, 23670.931200, 1474.020042, 2948.040085, X, Y) && !ellipse(23596.459800, 25674.184200, 357.672010, 357.672010, 0.000000, X, Y) && !ellipse(28048.520940, 23450.468800, 214.556006, 214.556006, 0.000000, X, Y) && !ellipse(26567.903198, 23991.829163, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  2 02:02:58 2013] Writing fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src54.gif
[Thu May  2 02:14:18 2013] Mean detx,y = (-54.23, 278.91) 
[Thu May  2 02:14:19 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  2 02:14:30 2013] Binned source spectrum to 10 counts/bin
[Thu May  2 02:14:30 2013] Setting source spectrum file to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Thu May  2 02:14:30 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Thu May  2 03:13:25 2013] Updating aperture counts using extracted products
[Thu May  2 03:13:25 2013] Total counts from fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src54_src_b10.pi.gz = 504.00
[Thu May  2 03:13:25 2013] Total counts from fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src54_bgd.pi.gz = 2038.00
[Thu May  2 03:13:26 2013] Got source and background scale factors 2231236.000000, 18659620.000000
[Thu May  2 03:13:26 2013] User source parameters:
  Position = (293.7, 272.6) = 12 52 54.40 -29 27 18.5
  Extent = 14.7 (14.7-29.5)", rotation angle = 0
  Source aperture counts = 260.3 +/- 23.5
  Background aperture counts = 243.7
  Rate = 0.004 +/- 0.0003

[Thu May  2 03:13:32 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 03:13:32 2013] Using photon index=1.80, rate=0.00353, arf fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src54.arf
[Thu May  2 03:13:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 03:13:32 2013] Updating source flux to 3.4e-14
[Thu May  2 03:13:46 2013] xmm0057740401/analysis//spectral/fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src54_pl.csv not found, spectral fit skipped or did not complete