[Thu May  2 01:17:08 2013] Detection parameters:
  Position = (246.4, 320.7) = 12 53 10.13 -29 23 49.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.9 +/- 10.0
  Background counts = 19.2
  Rate = 0.0007 +/- 0.0002

[Thu May  2 01:17:08 2013] Off-axis axis estimate = 4.10'
[Thu May  2 01:17:53 2013] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:17:53 2013] Initial guess for spatial extent in simple fitting = 8.48"
[Thu May  2 01:17:53 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.042
[Thu May  2 01:17:53 2013] Giving source the simple spatial ID 59 for pass 0, mean size = 8.48"
[Thu May  2 01:17:54 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src59.ximg exists
[Thu May  2 01:17:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src59.csv
[Thu May  2 01:17:54 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src59_1.ximg exists
[Thu May  2 01:17:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src59.csv
[Thu May  2 01:17:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:17:55 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Thu May  2 01:17:55 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Thu May  2 01:17:55 2013] Fit fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Thu May  2 01:18:37 2013] Spatial fit model total counts = 202.817000, observed total counts = 203.000000
[Thu May  2 01:18:37 2013] Offset between fit and detection position for source 45 = 0.283495 pixels
[Thu May  2 01:18:37 2013] 201.644500 total counts/ 163.943000 bgd. counts: snr = 2.944504
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 0.283495 pixels
  Position = (246.3, 320.9) = 12 53 10.19 -29 23 48.7
  Extent = 5.8 (3.3-9.4)", rotation angle = 0
  Source counts = 37.7 +/- 14.2
  Background counts = 163.9
  Rate = 0.0006 +/- 0.0002
[Thu May  2 01:18:38 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:18:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:18:38 2013] Assessing source extent using major axis lower bound
[Thu May  2 01:18:38 2013] Source does appear to be extended
[Thu May  2 01:18:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:19:00 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 01:19:00 2013] Initial guess for spatial extent in simple fitting = 5.83"
[Thu May  2 01:19:00 2013] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.182
[Thu May  2 01:19:00 2013] Giving source the simple spatial ID 59 for pass 1, mean size = 5.83"
[Thu May  2 01:19:01 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src59.ximg exists
[Thu May  2 01:19:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src59.csv
[Thu May  2 01:19:01 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src59_1.ximg exists
[Thu May  2 01:19:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src59.csv
[Thu May  2 01:19:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:19:02 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Thu May  2 01:19:02 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Thu May  2 01:19:02 2013] Fit fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Thu May  2 01:19:35 2013] Spatial fit model total counts = 202.969000, observed total counts = 203.000000
[Thu May  2 01:19:35 2013] Offset between fit and detection position for source 45 = 0.012984 pixels
[Thu May  2 01:19:35 2013] 201.741400 total counts/ 162.529000 bgd. counts: snr = 3.075799
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 0.012984 pixels
  Position = (246.3, 320.9) = 12 53 10.19 -29 23 48.6
  Extent = 6.1 (3.3-9.4)", rotation angle = 0
  Source counts = 39.2 +/- 14.2
  Background counts = 162.5
  Rate = 0.0006 +/- 0.0002
[Thu May  2 01:19:36 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:19:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:19:36 2013] Assessing source extent using major axis lower bound
[Thu May  2 01:19:36 2013] Source does appear to be extended
[Thu May  2 01:19:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 02:02:59 2013] XMMSAS src. selection expression = ellipse(21376.392600, 27867.384960, 366.530411, 366.530411, 0.000000, X, Y)
[Thu May  2 02:02:59 2013] Writing source region out to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src45_src.reg
[Thu May  2 02:02:59 2013] Extracting stamp from image fullrun_mos2_xmm0057740401_pi300-10000_cl_sm2.00.img.gz, (225, 300) - (267, 342)
[Thu May  2 02:02:59 2013] XMMSAS bgd. selection expression = annulus(21376.392600, 27867.384960, 610.884018, 1221.768035, X, Y) && !ellipse(22866.293213, 28202.689697, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  2 02:02:59 2013] Writing fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src45.gif
[Thu May  2 02:28:45 2013] Mean detx,y = (-2210.54, -5224.04) 
[Thu May  2 02:28:47 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  2 02:28:54 2013] Binned source spectrum to 10 counts/bin
[Thu May  2 02:28:54 2013] Setting source spectrum file to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Thu May  2 02:28:54 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Thu May  2 03:11:39 2013] Not generating rmf since there are only 39 counts
[Thu May  2 03:11:39 2013] rmf not generated due to insufficient counts
[Thu May  2 03:13:31 2013] Updating aperture counts using extracted products
[Thu May  2 03:13:31 2013] Total counts from fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src45_src_b10.pi.gz = 74.00
[Thu May  2 03:13:31 2013] Total counts from fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src45_bgd.pi.gz = 278.00
[Thu May  2 03:13:31 2013] Got source and background scale factors 422400.000000, 2966400.000000
[Thu May  2 03:13:31 2013] User source parameters:
  Position = (246.3, 320.9) = 12 53 10.19 -29 23 48.6
  Extent = 6.1 (3.3-9.4)", rotation angle = 0
  Source aperture counts = 34.4 +/- 9.6
  Background aperture counts = 39.6
  Rate = 0.0005 +/- 0.0001

[Thu May  2 03:13:33 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 03:13:33 2013] Using photon index=1.80, rate=0.000579, arf fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src45.arf
[Thu May  2 03:13:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 03:13:33 2013] Updating source flux to 8.5e-15
[Thu May  2 03:13:41 2013] Source 45 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May  2 03:13:46 2013] xmm0057740401/analysis//spectral/fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src45_pl.csv not found, spectral fit skipped or did not complete