[Thu May  2 01:17:07 2013] Detection parameters:
  Position = (441.9, 366.0) = 12 52 5.07 -29 20 32.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.4 +/- 14.8
  Background counts = 29.0
  Rate = 0.001 +/- 0.0002

[Thu May  2 01:17:08 2013] Off-axis axis estimate = 11.50'
[Thu May  2 01:17:53 2013] Using EEF radius (= 12.18 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:17:53 2013] Initial guess for spatial extent in simple fitting = 12.18"
[Thu May  2 01:17:53 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.827
[Thu May  2 01:17:53 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 12.18"
[Thu May  2 01:17:54 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src33.ximg exists
[Thu May  2 01:17:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src33.csv
[Thu May  2 01:17:54 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src33_1.ximg exists
[Thu May  2 01:17:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src33.csv
[Thu May  2 01:17:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:17:54 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Thu May  2 01:17:54 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Thu May  2 01:17:54 2013] Fit fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Thu May  2 01:18:37 2013] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 15.908059 pixels away
[Thu May  2 01:18:37 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:18:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:18:37 2013] Assessing source extent using major
[Thu May  2 01:18:37 2013] Source does appear to be extended
[Thu May  2 01:18:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:19:00 2013] Using EEF radius (= 12.18 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:19:00 2013] Initial guess for spatial extent in simple fitting = 12.18"
[Thu May  2 01:19:00 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.827
[Thu May  2 01:19:00 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 12.18"
[Thu May  2 01:19:01 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src33.ximg exists
[Thu May  2 01:19:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src33.csv
[Thu May  2 01:19:01 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src33_1.ximg exists
[Thu May  2 01:19:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src33.csv
[Thu May  2 01:19:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:19:02 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Thu May  2 01:19:02 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Thu May  2 01:19:02 2013] Fit fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Thu May  2 01:19:35 2013] Spatial fit model total counts = 501.989000, observed total counts = 502.000000
[Thu May  2 01:19:35 2013] Offset between fit and detection position for source 30 = 3.220510 pixels
[Thu May  2 01:19:35 2013] 491.471000 total counts/ 135.092000 bgd. counts: snr = 30.661775
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 3.220510 pixels
  Position = (445.1, 365.3) = 12 52 4.03 -29 20 34.9
  Extent = 24.3 (24.3-24.4)", rotation angle = 0
  Source counts = 356.4 +/- 22.2
  Background counts = 135.1
  Rate = 0.005 +/- 0.0003
[Thu May  2 01:19:35 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:19:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:19:35 2013] Assessing source extent using major axis lower bound
[Thu May  2 01:19:35 2013] Source does appear to be extended
[Thu May  2 01:19:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:19:36 2013] Source is confused with source 35
[Thu May  2 02:02:58 2013] XMMSAS src. selection expression = ellipse(38675.248000, 31733.238200, 1460.778042, 1460.778042, 0.000000, X, Y)
[Thu May  2 02:02:58 2013] Writing source region out to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src30_src.reg
[Thu May  2 02:02:58 2013] Extracting stamp from image fullrun_mos2_xmm0057740401_pi300-10000_cl_sm2.00.img.gz, (361, 281) - (529, 449)
[Thu May  2 02:02:58 2013] XMMSAS bgd. selection expression = annulus(38675.248000, 31733.238200, 2434.630070, 4869.260140, X, Y) && !ellipse(33293.604828, 38495.319641, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(35337.677368, 34684.911865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35854.893005, 30824.355896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38596.675385, 34237.117279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33714.474762, 32147.404785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35773.314575, 35275.207184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37931.241000, 30572.881600, 356.812010, 200.474406, 90.000000, X, Y) && !ellipse(33454.319061, 34220.000305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36376.894000, 35808.934000, 1934.800056, 1934.800056, 0.000000, X, Y) && !ellipse(34470.857600, 30516.630000, 354.733610, 354.733610, 0.000000, X, Y)
[Thu May  2 02:02:58 2013] Writing fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src30.gif
[Thu May  2 02:18:31 2013] Mean detx,y = (15104.98, -1990.78) 
[Thu May  2 02:18:32 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  2 02:19:00 2013] Binned source spectrum to 10 counts/bin
[Thu May  2 02:19:00 2013] Setting source spectrum file to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Thu May  2 02:19:00 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Thu May  2 03:13:27 2013] Updating aperture counts using extracted products
[Thu May  2 03:13:27 2013] Total counts from fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 1228.00
[Thu May  2 03:13:28 2013] Total counts from fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src30_bgd.pi.gz = 2556.00
[Thu May  2 03:13:28 2013] Got source and background scale factors 6704000.000000, 23734660.000000
[Thu May  2 03:13:28 2013] User source parameters:
  Position = (445.1, 365.3) = 12 52 4.03 -29 20 34.9
  Extent = 24.3 (24.3-24.4)", rotation angle = 0
  Source aperture counts = 506.0 +/- 36.1
  Background aperture counts = 722.0
  Rate = 0.007 +/- 0.0005

[Thu May  2 03:13:33 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 03:13:33 2013] Using photon index=1.80, rate=0.00526, arf fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src30.arf
[Thu May  2 03:13:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 03:13:33 2013] Updating source flux to 1.4e-13
[Thu May  2 03:13:41 2013] Flag c found in src. 30 procflags, skipping spectral fitting
[Thu May  2 03:13:46 2013] xmm0057740401/analysis//spectral/fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete