[Thu May 2 01:17:06 2013] Detection parameters: Position = (204.0, 151.7) = 12 53 24.32 -29 36 3.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 254.4 +/- 19.9 Background counts = 15.6 Rate = 0.004 +/- 0.0003 [Thu May 2 01:17:08 2013] Off-axis axis estimate = 12.65' [Thu May 2 01:17:53 2013] Using EEF radius (= 12.75 ")to estimate initial spatial extent for simple fitting [Thu May 2 01:17:53 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu May 2 01:17:53 2013] Initial guess for spatial extent in simple fitting = 12.75" [Thu May 2 01:17:53 2013] source mask rpix=2.9, npix_max = 47, mask sum = 39, frac = 0.828 [Thu May 2 01:17:53 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 12.75" [Thu May 2 01:17:53 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src6.ximg exists [Thu May 2 01:17:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src6.csv [Thu May 2 01:17:53 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src6_1.ximg exists [Thu May 2 01:17:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src6.csv [Thu May 2 01:17:53 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src6_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 01:17:54 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists [Thu May 2 01:17:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src6.csv [Thu May 2 01:17:54 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists [Thu May 2 01:17:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src6.csv [Thu May 2 01:17:54 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 01:18:37 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.818625 pixels away [Thu May 2 01:18:37 2013] Source 3 is offset by -6.223730 and 0.496943 pixels which is larger than 2 X fitted extent = 1.524846 x 1.524846, not incorporating fit results [Thu May 2 01:18:37 2013] Vigneting correction estimate = 1.000000 [Thu May 2 01:18:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 2 01:18:37 2013] Assessing source extent using major [Thu May 2 01:18:37 2013] Source does appear to be extended [Thu May 2 01:18:37 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 2 01:19:00 2013] Using EEF radius (= 12.75 ")to estimate initial spatial extent for simple fitting [Thu May 2 01:19:00 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu May 2 01:19:00 2013] Initial guess for spatial extent in simple fitting = 12.75" [Thu May 2 01:19:00 2013] source mask rpix=2.9, npix_max = 47, mask sum = 39, frac = 0.828 [Thu May 2 01:19:00 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 12.75" [Thu May 2 01:19:00 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src6.ximg exists [Thu May 2 01:19:00 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src6_1.ximg exists [Thu May 2 01:19:00 2013] Fit fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src6 appears to have run properly [Thu May 2 01:19:01 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists [Thu May 2 01:19:01 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists [Thu May 2 01:19:01 2013] Fit fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly [Thu May 2 01:19:35 2013] Warning, spatial fit 6 centroid is now closest to src. 9 [Thu May 2 01:19:35 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 48.031382 pixels away [Thu May 2 01:19:35 2013] Vigneting correction estimate = 1.000000 [Thu May 2 01:19:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 2 01:19:35 2013] Assessing source extent using major [Thu May 2 01:19:35 2013] Source does appear to be extended [Thu May 2 01:19:35 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 2 02:02:58 2013] XMMSAS src. selection expression = ellipse(17697.329514, 13149.028030, 652.500000, 652.500000, 0.000000, X, Y) [Thu May 2 02:02:58 2013] Writing source region out to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src3_src.reg [Thu May 2 02:02:58 2013] Extracting stamp from image fullrun_mos2_xmm0057740401_pi300-10000_cl_sm2.00.img.gz, (166, 114) - (241, 189) [Thu May 2 02:02:58 2013] XMMSAS bgd. selection expression = annulus(17697.329514, 13149.028030, 1087.500000, 2175.000000, X, Y) && !ellipse(17234.559235, 11989.380264, 870.000000, 870.000000, 0.000000, X, Y) [Thu May 2 02:02:58 2013] Writing fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src3.gif [Thu May 2 02:10:06 2013] Mean detx,y = (-11353.52, 6922.05) [Thu May 2 02:10:07 2013] Setting backscal keywords in source and bgd. spectrum [Thu May 2 02:10:30 2013] Binned source spectrum to 10 counts/bin [Thu May 2 02:10:30 2013] Setting source spectrum file to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Thu May 2 02:10:30 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src3_bgd.pi.gz [Thu May 2 02:31:18 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Thu May 2 02:31:18 2013] rmf not generated due to insufficient counts [Thu May 2 03:13:23 2013] Updating aperture counts using extracted products [Thu May 2 03:13:23 2013] Total counts from fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 288.00 [Thu May 2 03:13:23 2013] Total counts from fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src3_bgd.pi.gz = 816.00 [Thu May 2 03:13:23 2013] Got source and background scale factors 1133380.000000, 8717583.000000 [Thu May 2 03:13:23 2013] User source parameters: Position = (204.0, 151.7) = 12 53 24.32 -29 36 3.7 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 181.9 +/- 18.0 Background aperture counts = 106.1 Rate = 0.003 +/- 0.0003 [Thu May 2 03:13:23 2013] Updating counts from extracted products [Thu May 2 03:13:23 2013] Set source signif. to 181.91/10.30 = 17.66 [Thu May 2 03:13:32 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 2 03:13:32 2013] Using photon index=1.80, rate=0.00268, arf fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src3.arf [Thu May 2 03:13:32 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 2 03:13:32 2013] Updating source flux to 7.3e-14 [Thu May 2 03:13:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu May 2 03:13:46 2013] xmm0057740401/analysis//spectral/fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete