[Thu May  2 01:17:07 2013] Detection parameters:
  Position = (388.1, 370.1) = 12 52 23.00 -29 20 13.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.3 +/- 14.5
  Background counts = 23.4
  Rate = 0.002 +/- 0.0002

[Thu May  2 01:17:08 2013] Off-axis axis estimate = 8.32'
[Thu May  2 01:17:53 2013] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:17:53 2013] Initial guess for spatial extent in simple fitting = 10.59"
[Thu May  2 01:17:53 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.045
[Thu May  2 01:17:53 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 10.59"
[Thu May  2 01:17:54 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src27.ximg exists
[Thu May  2 01:17:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src27.csv
[Thu May  2 01:17:54 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src27_1.ximg exists
[Thu May  2 01:17:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src27.csv
[Thu May  2 01:17:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:17:54 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Thu May  2 01:17:54 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Thu May  2 01:17:54 2013] Fit fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Thu May  2 01:18:37 2013] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 14.389382 pixels away
[Thu May  2 01:18:37 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:18:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:18:37 2013] Assessing source extent using major
[Thu May  2 01:18:37 2013] Source does appear to be extended
[Thu May  2 01:18:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:19:00 2013] Using EEF radius (= 10.59 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:19:00 2013] Initial guess for spatial extent in simple fitting = 10.59"
[Thu May  2 01:19:00 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.045
[Thu May  2 01:19:00 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 10.59"
[Thu May  2 01:19:01 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src27.ximg exists
[Thu May  2 01:19:01 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src27.csv
[Thu May  2 01:19:01 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src27_1.ximg exists
[Thu May  2 01:19:01 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src27.csv
[Thu May  2 01:19:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:19:02 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Thu May  2 01:19:02 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Thu May  2 01:19:02 2013] Fit fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Thu May  2 01:19:35 2013] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 10.353935 pixels away
[Thu May  2 01:19:35 2013] Warning: source 34 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 29.836738 pixels away
[Thu May  2 01:19:35 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:19:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:19:35 2013] Assessing source extent using major
[Thu May  2 01:19:35 2013] Source does appear to be extended
[Thu May  2 01:19:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 02:02:58 2013] XMMSAS src. selection expression = ellipse(33714.474762, 32147.404785, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May  2 02:02:58 2013] Writing source region out to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src29_src.reg
[Thu May  2 02:02:58 2013] Extracting stamp from image fullrun_mos2_xmm0057740401_pi300-10000_cl_sm2.00.img.gz, (351, 333) - (426, 408)
[Thu May  2 02:02:58 2013] XMMSAS bgd. selection expression = annulus(33714.474762, 32147.404785, 1087.500000, 2175.000000, X, Y) && !ellipse(35337.677368, 34684.911865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35854.893005, 30824.355896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33454.319061, 34220.000305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36376.894000, 35808.934000, 1934.800056, 1934.800056, 0.000000, X, Y) && !ellipse(34470.857600, 30516.630000, 354.733610, 354.733610, 0.000000, X, Y)
[Thu May  2 02:02:58 2013] Writing fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src29.gif
[Thu May  2 02:16:29 2013] Mean detx,y = (10816.87, -4306.93) 
[Thu May  2 02:16:30 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  2 02:16:40 2013] Binned source spectrum to 10 counts/bin
[Thu May  2 02:16:40 2013] Setting source spectrum file to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Thu May  2 02:16:40 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Thu May  2 02:53:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May  2 02:53:07 2013] rmf not generated due to insufficient counts
[Thu May  2 03:13:27 2013] Updating aperture counts using extracted products
[Thu May  2 03:13:27 2013] Total counts from fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 228.00
[Thu May  2 03:13:27 2013] Total counts from fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src29_bgd.pi.gz = 963.00
[Thu May  2 03:13:27 2013] Got source and background scale factors 1274572.000000, 8816024.000000
[Thu May  2 03:13:27 2013] User source parameters:
  Position = (388.1, 370.1) = 12 52 23.00 -29 20 13.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 88.8 +/- 16.1
  Background aperture counts = 139.2
  Rate = 0.001 +/- 0.0002

[Thu May  2 03:13:27 2013] Updating counts from extracted products
[Thu May  2 03:13:27 2013] Set source signif. to 88.77/11.80 = 7.52
[Thu May  2 03:13:32 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 03:13:32 2013] Using photon index=1.80, rate=0.00131, arf fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src29.arf
[Thu May  2 03:13:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 03:13:32 2013] Updating source flux to 2.8e-14
[Thu May  2 03:13:41 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May  2 03:13:46 2013] xmm0057740401/analysis//spectral/fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete