[Thu May  2 01:17:07 2013] Detection parameters:
  Position = (260.2, 382.4) = 12 53 5.52 -29 19 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.8 +/- 12.8
  Background counts = 21.1
  Rate = 0.002 +/- 0.0003

[Thu May  2 01:17:08 2013] Off-axis axis estimate = 6.69'
[Thu May  2 01:17:53 2013] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:17:53 2013] Initial guess for spatial extent in simple fitting = 9.77"
[Thu May  2 01:17:53 2013] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.994
[Thu May  2 01:17:53 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 9.77"
[Thu May  2 01:17:54 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src23.ximg exists
[Thu May  2 01:17:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src23.csv
[Thu May  2 01:17:54 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu May  2 01:17:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src23.csv
[Thu May  2 01:17:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:17:54 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu May  2 01:17:54 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu May  2 01:17:54 2013] Fit fullrun_mos2_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Thu May  2 01:18:37 2013] Spatial fit model total counts = 306.010000, observed total counts = 303.000000
[Thu May  2 01:18:37 2013] Offset between fit and detection position for source 25 = 0.278725 pixels
[Thu May  2 01:18:37 2013] 309.117800 total counts/ 253.183000 bgd. counts: snr = 3.515320
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.278725 pixels
  Position = (260.0, 382.2) = 12 53 5.59 -29 19 21.8
  Extent = 6.2 (4.5-8.0)", rotation angle = 0
  Source counts = 55.9 +/- 17.6
  Background counts = 253.2
  Rate = 0.0008 +/- 0.0003
[Thu May  2 01:18:37 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:18:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:18:37 2013] Assessing source extent using major axis lower bound
[Thu May  2 01:18:37 2013] Source does appear to be extended
[Thu May  2 01:18:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:19:00 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 01:19:00 2013] Initial guess for spatial extent in simple fitting = 6.20"
[Thu May  2 01:19:00 2013] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.079
[Thu May  2 01:19:00 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 6.20"
[Thu May  2 01:19:01 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src23.ximg exists
[Thu May  2 01:19:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src23.csv
[Thu May  2 01:19:01 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src23_1.ximg exists
[Thu May  2 01:19:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src23.csv
[Thu May  2 01:19:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:19:01 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Thu May  2 01:19:01 2013] fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Thu May  2 01:19:01 2013] Fit fullrun_mos2_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Thu May  2 01:19:35 2013] Spatial fit model total counts = 305.987000, observed total counts = 303.000000
[Thu May  2 01:19:35 2013] Offset between fit and detection position for source 25 = 0.000072 pixels
[Thu May  2 01:19:35 2013] 309.094100 total counts/ 253.156000 bgd. counts: snr = 3.515714
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.000072 pixels
  Position = (260.0, 382.2) = 12 53 5.59 -29 19 21.8
  Extent = 6.2 (4.5-8.0)", rotation angle = 0
  Source counts = 55.9 +/- 17.6
  Background counts = 253.2
  Rate = 0.0008 +/- 0.0003
[Thu May  2 01:19:35 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:19:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:19:35 2013] Assessing source extent using major axis lower bound
[Thu May  2 01:19:35 2013] Source does appear to be extended
[Thu May  2 01:19:35 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 02:02:58 2013] XMMSAS src. selection expression = ellipse(22574.281020, 33205.425000, 371.978411, 371.978411, 0.000000, X, Y)
[Thu May  2 02:02:58 2013] Writing source region out to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src25_src.reg
[Thu May  2 02:02:58 2013] Extracting stamp from image fullrun_mos2_xmm0057740401_pi300-10000_cl_sm2.00.img.gz, (239, 361) - (281, 404)
[Thu May  2 02:02:58 2013] XMMSAS bgd. selection expression = annulus(22574.281020, 33205.425000, 619.964018, 1239.928036, X, Y) && !ellipse(21991.520798, 32453.187164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21764.604736, 32189.763123, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  2 02:02:58 2013] Writing fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src25.gif
[Thu May  2 02:14:49 2013] Mean detx,y = (990.73, -9624.52) 
[Thu May  2 02:14:51 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  2 02:14:57 2013] Binned source spectrum to 10 counts/bin
[Thu May  2 02:14:58 2013] Setting source spectrum file to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Thu May  2 02:14:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Thu May  2 02:52:34 2013] Not generating rmf since there are only 55 counts
[Thu May  2 02:52:34 2013] rmf not generated due to insufficient counts
[Thu May  2 03:13:26 2013] Updating aperture counts using extracted products
[Thu May  2 03:13:26 2013] Total counts from fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 107.00
[Thu May  2 03:13:26 2013] Total counts from fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src25_bgd.pi.gz = 317.00
[Thu May  2 03:13:26 2013] Got source and background scale factors 443200.000000, 2476688.000000
[Thu May  2 03:13:26 2013] User source parameters:
  Position = (260.0, 382.2) = 12 53 5.59 -29 19 21.8
  Extent = 6.2 (4.5-8.0)", rotation angle = 0
  Source aperture counts = 50.3 +/- 11.4
  Background aperture counts = 56.7
  Rate = 0.0007 +/- 0.0002

[Thu May  2 03:13:32 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 03:13:32 2013] Using photon index=1.80, rate=0.000826, arf fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src25.arf
[Thu May  2 03:13:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 03:13:32 2013] Updating source flux to 1.5e-14
[Thu May  2 03:13:41 2013] Source 25 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May  2 03:13:46 2013] xmm0057740401/analysis//spectral/fullrun_mos2_xmm0057740401_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete