[Thu May  2 01:17:05 2013] Detection parameters:
  Position = (366.5, 223.0) = 12 52 30.12 -29 30 54.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 159.8 +/- 16.2
  Background counts = 17.3
  Rate = 0.004 +/- 0.0004

[Thu May  2 01:17:06 2013] Off-axis axis estimate = 7.37'
[Thu May  2 01:17:50 2013] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:17:50 2013] Initial guess for spatial extent in simple fitting = 10.11"
[Thu May  2 01:17:50 2013] source mask rpix=2.3, npix_max = 31, mask sum = 29, frac = 0.909
[Thu May  2 01:17:50 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 10.11"
[Thu May  2 01:17:51 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src6.ximg exists
[Thu May  2 01:17:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src6.csv
[Thu May  2 01:17:51 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu May  2 01:17:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src6.csv
[Thu May  2 01:17:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:17:52 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu May  2 01:17:52 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu May  2 01:17:52 2013] Fit fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Thu May  2 01:18:26 2013] Spatial fit model total counts = 324.570000, observed total counts = 299.000000
[Thu May  2 01:18:26 2013] Offset between fit and detection position for source 56 = 0.373000 pixels
[Thu May  2 01:18:26 2013] 319.179000 total counts/ 164.496000 bgd. counts: snr = 12.060489
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 0.373000 pixels
  Position = (366.7, 223.3) = 12 52 30.07 -29 30 52.9
  Extent = 7.6 (6.5-9.1)", rotation angle = 0
  Source counts = 154.7 +/- 17.9
  Background counts = 164.5
  Rate = 0.002 +/- 0.0003
[Thu May  2 01:18:26 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:18:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:18:26 2013] Assessing source extent using major axis lower bound
[Thu May  2 01:18:26 2013] Source does appear to be extended
[Thu May  2 01:18:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:18:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 01:18:59 2013] Initial guess for spatial extent in simple fitting = 7.57"
[Thu May  2 01:18:59 2013] source mask rpix=1.7, npix_max = 20, mask sum = 24, frac = 1.195
[Thu May  2 01:18:59 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 7.57"
[Thu May  2 01:18:59 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src6.ximg exists
[Thu May  2 01:18:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src6.csv
[Thu May  2 01:18:59 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu May  2 01:18:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src6.csv
[Thu May  2 01:18:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:19:00 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu May  2 01:19:00 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu May  2 01:19:00 2013] Fit fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Thu May  2 01:19:25 2013] Spatial fit model total counts = 323.635000, observed total counts = 299.000000
[Thu May  2 01:19:25 2013] Offset between fit and detection position for source 56 = 0.010393 pixels
[Thu May  2 01:19:25 2013] 318.272000 total counts/ 162.578000 bgd. counts: snr = 12.210712
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 0.010393 pixels
  Position = (366.7, 223.3) = 12 52 30.07 -29 30 52.9
  Extent = 7.5 (6.5-9.1)", rotation angle = 0
  Source counts = 155.7 +/- 17.8
  Background counts = 162.6
  Rate = 0.002 +/- 0.0003
[Thu May  2 01:19:25 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:19:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:19:25 2013] Assessing source extent using major axis lower bound
[Thu May  2 01:19:25 2013] Source does appear to be extended
[Thu May  2 01:19:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:21:05 2013] XMMSAS src. selection expression = ellipse(31855.463000, 19380.741000, 452.574013, 452.574013, 0.000000, X, Y)
[Thu May  2 01:21:05 2013] Not overwriting source region fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src56_src.reg
[Thu May  2 01:21:05 2013] Extracting stamp from image fullrun_mos1_xmm0057740401_pi300-10000_cl_sm2.00.img.gz, (341, 197) - (393, 249)
[Thu May  2 01:21:05 2013] XMMSAS bgd. selection expression = annulus(31855.463000, 19380.741000, 754.290022, 1508.580043, X, Y)
[Thu May  2 01:21:05 2013] Writing fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src56.gif
[Thu May  2 01:21:53 2013] Mean detx,y = (6977.58, -4213.55) 
[Thu May  2 01:21:54 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  2 01:22:11 2013] Binned source spectrum to 10 counts/bin
[Thu May  2 01:22:11 2013] Setting source spectrum file to fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Thu May  2 01:22:11 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Thu May  2 03:13:20 2013] Updating aperture counts using extracted products
[Thu May  2 03:13:20 2013] Total counts from fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src56_src_b10.pi.gz = 195.00
[Thu May  2 03:13:20 2013] Total counts from fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src56_bgd.pi.gz = 487.00
[Thu May  2 03:13:20 2013] Got source and background scale factors 561282.000000, 4938488.000000
[Thu May  2 03:13:20 2013] User source parameters:
  Position = (366.7, 223.3) = 12 52 30.07 -29 30 52.9
  Extent = 7.5 (6.5-9.1)", rotation angle = 0
  Source aperture counts = 139.7 +/- 15.0
  Background aperture counts = 55.3
  Rate = 0.002 +/- 0.0002

[Thu May  2 03:13:22 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 03:13:22 2013] Using photon index=1.80, rate=0.0023, arf fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src56.arf
[Thu May  2 03:13:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 03:13:22 2013] Updating source flux to 4.3e-14
[Thu May  2 03:13:41 2013] xmm0057740401/analysis//spectral/fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src56_pl.csv not found, spectral fit skipped or did not complete