[Thu May  2 01:17:05 2013] Detection parameters:
  Position = (204.3, 257.2) = 12 53 24.17 -29 28 26.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 167.1 +/- 16.6
  Background counts = 15.4
  Rate = 0.004 +/- 0.0004

[Thu May  2 01:17:06 2013] Off-axis axis estimate = 7.45'
[Thu May  2 01:17:50 2013] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:17:50 2013] Initial guess for spatial extent in simple fitting = 10.15"
[Thu May  2 01:17:50 2013] source mask rpix=2.3, npix_max = 32, mask sum = 29, frac = 0.902
[Thu May  2 01:17:50 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 10.15"
[Thu May  2 01:17:51 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src9.ximg exists
[Thu May  2 01:17:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src9.csv
[Thu May  2 01:17:51 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu May  2 01:17:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src9.csv
[Thu May  2 01:17:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:17:52 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu May  2 01:17:52 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu May  2 01:17:52 2013] Fit fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Thu May  2 01:18:26 2013] Spatial fit model total counts = 394.604000, observed total counts = 395.000000
[Thu May  2 01:18:26 2013] Offset between fit and detection position for source 53 = 0.128530 pixels
[Thu May  2 01:18:26 2013] 361.064000 total counts/ 260.578000 bgd. counts: snr = 6.224962
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 0.128530 pixels
  Position = (204.4, 257.1) = 12 53 24.15 -29 28 26.1
  Extent = 4.5 (3.8-5.6)", rotation angle = 0
  Source counts = 100.5 +/- 19.0
  Background counts = 260.6
  Rate = 0.001 +/- 0.0003
[Thu May  2 01:18:26 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:18:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:18:26 2013] Assessing source extent using major axis lower bound
[Thu May  2 01:18:26 2013] Source does appear to be extended
[Thu May  2 01:18:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:18:26 2013] Source is confused with source 13
[Thu May  2 01:18:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 01:18:59 2013] Initial guess for spatial extent in simple fitting = 4.52"
[Thu May  2 01:18:59 2013] source mask rpix=1.0, npix_max = 9, mask sum = 7, frac = 0.738
[Thu May  2 01:18:59 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 4.52"
[Thu May  2 01:19:00 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src9.ximg exists
[Thu May  2 01:19:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src9.csv
[Thu May  2 01:19:00 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu May  2 01:19:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src9.csv
[Thu May  2 01:19:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:19:00 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu May  2 01:19:00 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu May  2 01:19:00 2013] Fit fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu May  2 01:19:25 2013] Spatial fit model total counts = 405.202000, observed total counts = 423.000000
[Thu May  2 01:19:25 2013] Offset between fit and detection position for source 53 = 0.106059 pixels
[Thu May  2 01:19:25 2013] Warning, changing simple spatial fit ID from 9 to 5
[Thu May  2 01:19:25 2013] 404.667400 total counts/ 313.914000 bgd. counts: snr = 5.122212
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 0.106059 pixels
  Position = (204.4, 257.0) = 12 53 24.14 -29 28 26.5
  Extent = 4.3 (3.6-5.2)", rotation angle = 0
  Source counts = 90.8 +/- 20.1
  Background counts = 313.9
  Rate = 0.001 +/- 0.0003
[Thu May  2 01:19:25 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:19:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:19:25 2013] Assessing source extent using major axis lower bound
[Thu May  2 01:19:25 2013] Source does appear to be extended
[Thu May  2 01:19:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:21:05 2013] XMMSAS src. selection expression = ellipse(17734.830400, 22306.460000, 258.475207, 258.475207, 0.000000, X, Y)
[Thu May  2 01:21:05 2013] Not overwriting source region fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src53_src.reg
[Thu May  2 01:21:05 2013] Extracting stamp from image fullrun_mos1_xmm0057740401_pi300-10000_cl_sm2.00.img.gz, (190, 242) - (219, 272)
[Thu May  2 01:21:05 2013] XMMSAS bgd. selection expression = annulus(17734.830400, 22306.460000, 430.792012, 861.584025, X, Y) && !ellipse(17811.704193, 21697.707291, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  2 01:21:05 2013] Writing fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src53.gif
[Thu May  2 01:22:46 2013] Mean detx,y = (-1361.46, 7570.49) 
[Thu May  2 01:22:47 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  2 01:22:55 2013] Binned source spectrum to 10 counts/bin
[Thu May  2 01:22:55 2013] Setting source spectrum file to fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Thu May  2 01:22:55 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Thu May  2 01:43:39 2013] Not generating rmf since there are only 90 counts
[Thu May  2 01:43:39 2013] rmf not generated due to insufficient counts
[Thu May  2 03:13:20 2013] Updating aperture counts using extracted products
[Thu May  2 03:13:20 2013] Total counts from fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src53_src_b10.pi.gz = 123.00
[Thu May  2 03:13:20 2013] Total counts from fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src53_bgd.pi.gz = 122.00
[Thu May  2 03:13:20 2013] Got source and background scale factors 188116.000000, 846364.000000
[Thu May  2 03:13:20 2013] User source parameters:
  Position = (204.4, 257.0) = 12 53 24.14 -29 28 26.5
  Extent = 4.3 (3.6-5.2)", rotation angle = 0
  Source aperture counts = 95.9 +/- 12.1
  Background aperture counts = 27.1
  Rate = 0.001 +/- 0.0002

[Thu May  2 03:13:22 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 03:13:22 2013] Using photon index=1.80, rate=0.00134, arf fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src53.arf
[Thu May  2 03:13:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 03:13:22 2013] Updating source flux to 2.7e-14
[Thu May  2 03:13:36 2013] Flag c found in src. 53 procflags, skipping spectral fitting
[Thu May  2 03:13:36 2013] Source 53 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May  2 03:13:41 2013] xmm0057740401/analysis//spectral/fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src53_pl.csv not found, spectral fit skipped or did not complete