[Thu May  2 01:17:04 2013] Detection parameters:
  Position = (384.3, 443.8) = 12 52 24.27 -29 14 53.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 213487.2 +/- 542.7
  Background counts = 11.5
  Rate = 3 +/- 0.008

[Thu May  2 01:17:06 2013] Off-axis axis estimate = 12.24'
[Thu May  2 01:17:50 2013] Using EEF radius (= 12.55 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:17:50 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  2 01:17:50 2013] Initial guess for spatial extent in simple fitting = 12.55"
[Thu May  2 01:17:50 2013] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.069
[Thu May  2 01:17:50 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 12.55"
[Thu May  2 01:17:51 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src1.ximg exists
[Thu May  2 01:17:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src1.csv
[Thu May  2 01:17:51 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May  2 01:17:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src1.csv
[Thu May  2 01:17:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:17:52 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May  2 01:17:52 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May  2 01:17:52 2013] Fit fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May  2 01:18:26 2013] Spatial fit model total counts = 218721.000000, observed total counts = 206558.000000
[Thu May  2 01:18:26 2013] Offset between fit and detection position for source 5 = 0.513752 pixels
[Thu May  2 01:18:26 2013] 221368.000000 total counts/ 52900.000000 bgd. counts: snr = 732.469565
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.513752 pixels
  Position = (383.9, 443.5) = 12 52 24.42 -29 14 54.9
  Extent = 8.7 (8.7-8.8)", rotation angle = 0
  Source counts = 168468.0 +/- 470.5
  Background counts = 52900.0
  Rate = 2 +/- 0.007
[Thu May  2 01:18:26 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:18:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:18:26 2013] Assessing source extent using major axis lower bound
[Thu May  2 01:18:26 2013] Source does appear to be extended
[Thu May  2 01:18:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:18:26 2013] Source is confused with source 4
[Thu May  2 01:18:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 01:18:59 2013] Initial guess for spatial extent in simple fitting = 8.73"
[Thu May  2 01:18:59 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.994
[Thu May  2 01:18:59 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 8.73"
[Thu May  2 01:18:59 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src1.ximg exists
[Thu May  2 01:18:59 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src1.csv
[Thu May  2 01:18:59 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May  2 01:18:59 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src1.csv
[Thu May  2 01:18:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:19:00 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May  2 01:19:00 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May  2 01:19:00 2013] Fit fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May  2 01:19:25 2013] Spatial fit model total counts = 196071.000000, observed total counts = 195436.000000
[Thu May  2 01:19:25 2013] Offset between fit and detection position for source 5 = 0.127803 pixels
[Thu May  2 01:19:25 2013] 196027.000000 total counts/ 10699.000000 bgd. counts: snr = 1791.717127
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.127803 pixels
  Position = (383.8, 443.6) = 12 52 24.46 -29 14 54.7
  Extent = 11.4 (11.4-11.4)", rotation angle = 0
  Source counts = 185328.0 +/- 442.7
  Background counts = 10699.0
  Rate = 3 +/- 0.007
[Thu May  2 01:19:25 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:19:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:19:25 2013] Assessing source extent using major axis lower bound
[Thu May  2 01:19:25 2013] Source does appear to be extended
[Thu May  2 01:19:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:21:05 2013] Counts = 185328.000000, rescaling region sizes by 3.000000
[Thu May  2 01:21:05 2013] XMMSAS src. selection expression = ellipse(33339.844000, 38544.588600, 2053.224059, 2053.224059, 0.000000, X, Y)
[Thu May  2 01:21:05 2013] Not overwriting source region fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src5_src.reg
[Thu May  2 01:21:05 2013] Extracting stamp from image fullrun_mos1_xmm0057740401_pi300-10000_cl_sm2.00.img.gz, (266, 326) - (502, 562)
[Thu May  2 01:21:05 2013] XMMSAS bgd. selection expression = annulus(33339.844000, 38544.588600, 10266.120295, 20532.240591, X, Y) && !ellipse(32315.316803, 38824.742401, 3480.000000, 3480.000000, 0.000000, X, Y) && !ellipse(35285.918200, 34737.840400, 577.329617, 577.329617, 0.000000, X, Y) && !ellipse(17811.704193, 21697.707291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31855.463000, 19380.741000, 603.432017, 603.432017, 0.000000, X, Y) && !ellipse(23617.438171, 25682.209320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17734.830400, 22306.460000, 344.633610, 344.633610, 0.000000, X, Y) && !ellipse(26809.131800, 29526.510600, 430.848812, 430.848812, 0.000000, X, Y) && !ellipse(25488.441800, 23698.287400, 1177.960034, 1177.960034, 0.000000, X, Y) && !ellipse(35840.367340, 30840.679016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30595.083496, 40093.124237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38561.382080, 34304.095703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28922.710000, 39112.820000, 1954.464056, 1954.464056, 0.000000, X, Y)
[Thu May  2 01:21:05 2013] Writing fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src5.gif
[Thu May  2 01:21:05 2013] ../../xmm0057740401/products/events/fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0057740401/products/events/fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create
[Thu May  2 01:21:06 2013] Mean detx,y = (-10006.21, -13207.19) 
[Thu May  2 01:21:06 2013] ../../xmm0057740401/products/images/fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src5_src.img and ../../xmm0057740401/products/images/fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create
[Thu May  2 01:21:06 2013] ../../xmm0057740401/products/spectra/fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0057740401/products/spectra/fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create
[Thu May  2 01:21:06 2013] Setting source spectrum file to fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu May  2 01:21:06 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu May  2 01:21:06 2013] ../../xmm0057740401/products/lightcurves/fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0057740401/products/lightcurves/fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create
[Thu May  2 03:13:19 2013] Updating aperture counts using extracted products
[Thu May  2 03:13:19 2013] Total counts from fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 216226.00
[Thu May  2 03:13:19 2013] Total counts from fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src5_bgd.pi.gz = 32303.00
[Thu May  2 03:13:19 2013] Got source and background scale factors 8789689.000000, 326417242.000000
[Thu May  2 03:13:19 2013] User source parameters:
  Position = (383.8, 443.6) = 12 52 24.46 -29 14 54.7
  Extent = 11.4 (11.4-11.4)", rotation angle = 0
  Source aperture counts = 215356.2 +/- 466.0
  Background aperture counts = 869.8
  Rate = 3 +/- 0.007

[Thu May  2 03:13:22 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 03:13:22 2013] Using photon index=1.80, rate=2.73, arf fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src5.arf
[Thu May  2 03:13:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 03:13:22 2013] Updating source flux to 8.4e-11
[Thu May  2 03:13:36 2013] Flag c found in src. 5 procflags, skipping spectral fitting
[Thu May  2 03:13:41 2013] xmm0057740401/analysis//spectral/fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete