[Thu May  2 01:17:05 2013] Detection parameters:
  Position = (294.1, 273.0) = 12 52 54.25 -29 27 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 160.2 +/- 17.8
  Background counts = 21.2
  Rate = 0.002 +/- 0.0003

[Thu May  2 01:17:06 2013] Off-axis axis estimate = 1.87'
[Thu May  2 01:17:50 2013] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:17:50 2013] Initial guess for spatial extent in simple fitting = 7.36"
[Thu May  2 01:17:50 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.832
[Thu May  2 01:17:50 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 7.36"
[Thu May  2 01:17:51 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src13.ximg exists
[Thu May  2 01:17:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src13.csv
[Thu May  2 01:17:51 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu May  2 01:17:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src13.csv
[Thu May  2 01:17:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:17:52 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu May  2 01:17:52 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu May  2 01:17:52 2013] Fit fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Thu May  2 01:18:26 2013] Spatial fit model total counts = 535.141000, observed total counts = 535.000000
[Thu May  2 01:18:26 2013] Offset between fit and detection position for source 48 = 0.621351 pixels
[Thu May  2 01:18:26 2013] 533.939000 total counts/ 255.004000 bgd. counts: snr = 17.467450
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 0.621351 pixels
  Position = (293.5, 273.0) = 12 52 54.45 -29 27 17.2
  Extent = 14.7 (14.6-29.4)", rotation angle = 0
  Source counts = 278.9 +/- 23.1
  Background counts = 255.0
  Rate = 0.004 +/- 0.0003
[Thu May  2 01:18:26 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:18:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:18:26 2013] Assessing source extent using major axis lower bound
[Thu May  2 01:18:26 2013] Source does appear to be extended
[Thu May  2 01:18:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:18:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 01:18:59 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May  2 01:18:59 2013] Initial guess for spatial extent in simple fitting = 14.72"
[Thu May  2 01:18:59 2013] source mask rpix=3.4, npix_max = 60, mask sum = 56, frac = 0.928
[Thu May  2 01:18:59 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 14.72"
[Thu May  2 01:19:00 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src12.ximg exists
[Thu May  2 01:19:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src12.csv
[Thu May  2 01:19:00 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src12_1.ximg exists
[Thu May  2 01:19:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src12.csv
[Thu May  2 01:19:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:19:00 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Thu May  2 01:19:00 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Thu May  2 01:19:00 2013] Fit fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Thu May  2 01:19:25 2013] Warning, spatial fit 12 centroid is now closest to src. 46
[Thu May  2 01:19:25 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:19:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:19:25 2013] Assessing source extent using major axis lower bound
[Thu May  2 01:19:25 2013] Source does appear to be extended
[Thu May  2 01:19:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:21:05 2013] XMMSAS src. selection expression = ellipse(25488.441800, 23698.287400, 883.470025, 883.470025, 0.000000, X, Y)
[Thu May  2 01:21:05 2013] Not overwriting source region fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src48_src.reg
[Thu May  2 01:21:05 2013] Extracting stamp from image fullrun_mos1_xmm0057740401_pi300-10000_cl_sm2.00.img.gz, (243, 222) - (344, 324)
[Thu May  2 01:21:05 2013] XMMSAS bgd. selection expression = annulus(25488.441800, 23698.287400, 1472.450042, 2944.900085, X, Y) && !ellipse(23617.438171, 25682.209320, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May  2 01:21:05 2013] Writing fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src48.gif
[Thu May  2 01:23:26 2013] Mean detx,y = (445.50, -73.23) 
[Thu May  2 01:23:27 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  2 01:23:36 2013] Binned source spectrum to 10 counts/bin
[Thu May  2 01:23:36 2013] Setting source spectrum file to fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Thu May  2 01:23:36 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Thu May  2 03:13:21 2013] Updating aperture counts using extracted products
[Thu May  2 03:13:21 2013] Total counts from fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src48_src_b10.pi.gz = 632.00
[Thu May  2 03:13:21 2013] Total counts from fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src48_bgd.pi.gz = 1867.00
[Thu May  2 03:13:21 2013] Got source and background scale factors 2456000.000000, 18645924.000000
[Thu May  2 03:13:21 2013] User source parameters:
  Position = (293.5, 273.0) = 12 52 54.45 -29 27 17.2
  Extent = 14.7 (14.6-29.4)", rotation angle = 0
  Source aperture counts = 386.1 +/- 26.2
  Background aperture counts = 245.9
  Rate = 0.006 +/- 0.0004

[Thu May  2 03:13:22 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 03:13:22 2013] Using photon index=1.80, rate=0.00412, arf fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src48.arf
[Thu May  2 03:13:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 03:13:22 2013] Updating source flux to 4e-14
[Thu May  2 03:13:41 2013] xmm0057740401/analysis//spectral/fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src48_pl.csv not found, spectral fit skipped or did not complete