[Thu May  2 01:17:05 2013] Detection parameters:
  Position = (360.1, 295.9) = 12 52 32.27 -29 25 37.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.3 +/- 9.4
  Background counts = 18.1
  Rate = 0.0007 +/- 0.0002

[Thu May  2 01:17:06 2013] Off-axis axis estimate = 4.48'
[Thu May  2 01:17:50 2013] Using EEF radius (= 8.67 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:17:50 2013] Initial guess for spatial extent in simple fitting = 8.67"
[Thu May  2 01:17:50 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.006
[Thu May  2 01:17:50 2013] Giving source the simple spatial ID 58 for pass 0, mean size = 8.67"
[Thu May  2 01:17:52 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src58.ximg exists
[Thu May  2 01:17:52 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src58.csv
[Thu May  2 01:17:52 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src58_1.ximg exists
[Thu May  2 01:17:52 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src58.csv
[Thu May  2 01:17:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:17:53 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Thu May  2 01:17:53 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src58.csv
[Thu May  2 01:17:53 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Thu May  2 01:17:53 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src58.csv
[Thu May  2 01:17:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:18:26 2013] Source 45 is offset by -0.626292 and -1.366842 pixels which is larger than
2 X fitted extent = 0.971228 x 0.971228, not incorporating fit results
[Thu May  2 01:18:26 2013] Warning, spatial fit 58 centroid is now closest to src. 43
[Thu May  2 01:18:26 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:18:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:18:26 2013] Assessing source extent using major
[Thu May  2 01:18:26 2013] Source does appear to be extended
[Thu May  2 01:18:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:18:26 2013] Deleting source due to low Poisson probability 0.7