[Thu May  2 01:17:05 2013] Detection parameters:
  Position = (309.0, 340.0) = 12 52 49.30 -29 22 25.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 140.3 +/- 15.6
  Background counts = 18.4
  Rate = 0.003 +/- 0.0003

[Thu May  2 01:17:06 2013] Off-axis axis estimate = 3.11'
[Thu May  2 01:17:50 2013] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Thu May  2 01:17:50 2013] Initial guess for spatial extent in simple fitting = 7.98"
[Thu May  2 01:17:50 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.734
[Thu May  2 01:17:50 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 7.98"
[Thu May  2 01:17:51 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src11.ximg exists
[Thu May  2 01:17:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src11.csv
[Thu May  2 01:17:51 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu May  2 01:17:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src11.csv
[Thu May  2 01:17:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:17:52 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu May  2 01:17:52 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu May  2 01:17:52 2013] Fit fullrun_mos1_xmm0057740401_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu May  2 01:18:26 2013] Spatial fit model total counts = 285.496000, observed total counts = 287.000000
[Thu May  2 01:18:26 2013] Offset between fit and detection position for source 40 = 0.305741 pixels
[Thu May  2 01:18:26 2013] 286.179000 total counts/ 183.349000 bgd. counts: snr = 7.594174
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.305741 pixels
  Position = (308.7, 339.9) = 12 52 49.41 -29 22 25.8
  Extent = 5.6 (4.3-6.7)", rotation angle = 0
  Source counts = 102.8 +/- 16.9
  Background counts = 183.3
  Rate = 0.002 +/- 0.0002
[Thu May  2 01:18:26 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:18:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:18:26 2013] Assessing source extent using major axis lower bound
[Thu May  2 01:18:26 2013] Source does appear to be extended
[Thu May  2 01:18:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:18:59 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 01:18:59 2013] Initial guess for spatial extent in simple fitting = 5.58"
[Thu May  2 01:18:59 2013] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.944
[Thu May  2 01:18:59 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 5.58"
[Thu May  2 01:19:00 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src10.ximg exists
[Thu May  2 01:19:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src10.csv
[Thu May  2 01:19:00 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu May  2 01:19:00 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src10.csv
[Thu May  2 01:19:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 01:19:00 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu May  2 01:19:00 2013] fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu May  2 01:19:00 2013] Fit fullrun_mos1_xmm0057740401_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Thu May  2 01:19:25 2013] Spatial fit model total counts = 293.000000, observed total counts = 293.000000
[Thu May  2 01:19:25 2013] Offset between fit and detection position for source 40 = 0.013950 pixels
[Thu May  2 01:19:25 2013] 292.939000 total counts/ 191.761000 bgd. counts: snr = 7.306442
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.013950 pixels
  Position = (308.7, 339.9) = 12 52 49.40 -29 22 25.7
  Extent = 5.4 (4.2-6.5)", rotation angle = 0
  Source counts = 101.2 +/- 17.1
  Background counts = 191.8
  Rate = 0.001 +/- 0.0003
[Thu May  2 01:19:25 2013] Vigneting correction estimate = 1.000000
[Thu May  2 01:19:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 01:19:25 2013] Assessing source extent using major axis lower bound
[Thu May  2 01:19:25 2013] Source does appear to be extended
[Thu May  2 01:19:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 01:21:05 2013] XMMSAS src. selection expression = ellipse(26809.131800, 29526.510600, 323.136609, 323.136609, 0.000000, X, Y)
[Thu May  2 01:21:05 2013] Not overwriting source region fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src40_src.reg
[Thu May  2 01:21:05 2013] Extracting stamp from image fullrun_mos1_xmm0057740401_pi300-10000_cl_sm2.00.img.gz, (290, 321) - (327, 359)
[Thu May  2 01:21:05 2013] XMMSAS bgd. selection expression = annulus(26809.131800, 29526.510600, 538.561015, 1077.122031, X, Y)
[Thu May  2 01:21:05 2013] Writing fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src40.gif
[Thu May  2 01:23:00 2013] Mean detx,y = (-4354.57, -3629.92) 
[Thu May  2 01:23:01 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  2 01:23:07 2013] Binned source spectrum to 10 counts/bin
[Thu May  2 01:23:07 2013] Setting source spectrum file to fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Thu May  2 01:23:07 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Thu May  2 03:13:20 2013] Updating aperture counts using extracted products
[Thu May  2 03:13:21 2013] Total counts from fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src40_src_b10.pi.gz = 138.00
[Thu May  2 03:13:21 2013] Total counts from fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src40_bgd.pi.gz = 267.00
[Thu May  2 03:13:21 2013] Got source and background scale factors 328000.000000, 2742400.000000
[Thu May  2 03:13:21 2013] User source parameters:
  Position = (308.7, 339.9) = 12 52 49.40 -29 22 25.7
  Extent = 5.4 (4.2-6.5)", rotation angle = 0
  Source aperture counts = 106.1 +/- 12.8
  Background aperture counts = 31.9
  Rate = 0.002 +/- 0.0002

[Thu May  2 03:13:22 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 03:13:22 2013] Using photon index=1.80, rate=0.00149, arf fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src40.arf
[Thu May  2 03:13:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 03:13:22 2013] Updating source flux to 2.6e-14
[Thu May  2 03:13:41 2013] xmm0057740401/analysis//spectral/fullrun_mos1_xmm0057740401_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete